Parting out 85 GMC Sierra Classic 2500 2wd* - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

abrahamseven · 09-01-2009, 09:44 PM

Ray, I sent you a PM , Thanks I appreciate it,

steve

mainermikeyd · 09-06-2009, 10:46 PM

What are your plans for the stripped frame??? I need a patch panel for my 82 frame, didn't know if you were gonna scrap it or not??

KrazyRay · 09-06-2009, 11:31 PM

Quote:

Originally Posted by mainermikeyd

What are your plans for the stripped frame??? I need a patch panel for my 82 frame, didn't know if you were gonna scrap it or not??

The back 2/3 of the frame was used for a trailer. I still have the front 1/3. Thanks, Ray

mainermikeyd · 09-07-2009, 08:01 AM

How much of the front frame is left?? Pics would help, I need a patch panel from each frame rail about 23" long(a little long but on the safe side), if they didnt cut away too much, I need to replace where my front spring perch rivets/bolts to the frame for my rear leaf springs, can you help me out??

KrazyRay · 09-08-2009, 12:08 AM

Quote:

Originally Posted by mainermikeyd

How much of the front frame is left?? Pics would help, I need a patch panel from each frame rail about 23" long(a little long but on the safe side), if they didnt cut away too much, I need to replace where my front spring perch rivets/bolts to the frame for my rear leaf springs, can you help me out??

The frame was cut off at the front cab mounts. From that part foward the frame is complete. I can't get pics until end of week. I don't know if that part of the frame will work for your patch.

mainermikeyd · 09-08-2009, 10:20 AM

No it wont thanks though

rod86 · 09-12-2009, 05:21 AM

do you still have the quater vent window s from both doors? wat condition are they in? need the whole vent window assemblies.

thanks

KrazyRay · 09-12-2009, 09:35 AM

Quote:

Originally Posted by rod86

do you still have the quater vent window s from both doors? wat condition are they in? need the whole vent window assemblies.

thanks

Yes, I have a pair of vents in good condition. $40pr. plus shipping. Thanks, Ray

**N2TRUX** · 09-12-2009, 02:43 PM

Dang dude, lots of great parts. How many trucks do you have?

KrazyRay · 09-12-2009, 03:21 PM

Quote:

Originally Posted by N2TRUX

Dang dude, lots of great parts. How many trucks do you have?

I have 8 trucks (73-87) and 6 (67-72) plus a barn full of parts!

benms79 · 09-27-2009, 05:13 PM

Quote:

Originally Posted by KrazyRay

I have 8 trucks (73-87) and 6 (67-72) plus a barn full of parts!

just wondering,do you have the trim piece that goes in the middle of tailgate i got a 85 silverado.with the chevy emblem? or were i could find one??

KrazyRay · 09-27-2009, 07:46 PM

Quote:

Originally Posted by benms79

just wondering,do you have the trim piece that goes in the middle of tailgate i got a 85 silverado.with the chevy emblem? or were i could find one??

Yes, I have the center piece- its on a 84 silverado. Do you want the chevrolet emblem that's on the tailgate trim? The trim is also in pretty good condition. Thanks, Ray

benms79 · 09-27-2009, 08:13 PM

Quote:

Originally Posted by KrazyRay

Dash pics. SOLD

do you have another one you will sell?

benms79 · 09-27-2009, 08:13 PM

Quote:

Originally Posted by benms79

do you have another one you will sell?

dash pad

benms79 · 09-27-2009, 08:16 PM

Quote:

Originally Posted by KrazyRay

Yes, I have the center piece- its on a 84 silverado. Do you want the chevrolet emblem that's on the tailgate trim? The trim is also in pretty good condition. Thanks, Ray

yes the trim and emblem,any pics? and price? im looking one in nice shape no dents.also looking a dash pad, rear roll pan.

KrazyRay · 09-27-2009, 10:55 PM

Quote:

Originally Posted by benms79

do you have another one you will sell?

I have only one dash that is in great condition (no tears) but it is from a 77 gmc and it is an ugly orangish color.

KrazyRay · 09-27-2009, 11:04 PM

Quote:

Originally Posted by benms79

yes the trim and emblem,any pics? and price? im looking one in nice shape no dents.also looking a dash pad, rear roll pan.

The center trim piece is $5, the tailgate emblem is $20, and the tailgate trim is $25. All 3 items would be $50 plus $30 to ship to n.c. If you want just the center piece and the emblem it would be $33 shipped. I'll have to check on the rear roll pan and you may not want the tailgate trim because it has a couple of dings in it . Thanks, Ray

Still Looken · 09-27-2009, 11:11 PM

Do you have the upper and lower radiator retainers and possibly the pads? If so how much shipped to 29720.

Thanks

KrazyRay · 09-28-2009, 12:57 AM

Quote:

Originally Posted by Still Looken

Do you have the upper and lower radiator retainers and possibly the pads? If so how much shipped to 29720.

Thanks

I have promised the upper rubber pieces to another board member. I should have the upper and lower radiator supports for a 4 core if that is what you are asking for.

Still Looken · 09-28-2009, 08:58 PM

That would be great, if you have them. I can still get new rubber pads from LMC.

KrazyRay · 10-03-2009, 08:26 PM

pics

KrazyRay · 10-03-2009, 08:28 PM

chrome trim pics...

benms79 · 11-01-2009, 09:41 AM

Looking for front plastic spoiler,goes under bumper 81-87. Let me no if you have one thnx ben

KrazyRay · 11-01-2009, 06:37 PM

Quote:

Originally Posted by benms79

Looking for front plastic spoiler,goes under bumper 81-87. Let me no if you have one thnx ben

Sorry, I don't have one of those. Thanks, Ray

wildmanaaron · 11-08-2009, 06:30 PM

I need a piece of the door jamb where the door striker goes. It is raised a little and the door striker bolts to that. Just a 4" by 4" section roughly is what I need of the drivers side. I will post a picture of the area I need later today.

09-01-2009, 09:44 PM	#151
abrahamseven Registered User Join Date: Oct 2004 Location: Fruitland, Idaho Posts: 68	Re: Parting out 85 GMC Sierra Classic 2500 2wd* Ray, I sent you a PM , Thanks I appreciate it, steve

09-06-2009, 10:46 PM	#152
mainermikeyd Registered User Join Date: Sep 2008 Location: Limington, ME Posts: 290	Re: Parting out 85 GMC Sierra Classic 2500 2wd* What are your plans for the stripped frame??? I need a patch panel for my 82 frame, didn't know if you were gonna scrap it or not?? __________________ Once a Marine Always a Marine OOH-RAH GM Fanatic 1982 K20 4" Rancho lift 350cid, edelbrock performer intake 1405 carb, hedman headers, TH350, " Wheres the MUD!!!!!!!!!!" 1986 c30 camper special 454, th400 (for sale) 1984 K10 Big Ten (project) needs motor 1984 C10 355, 700r4, (project) needs shortbox bed Last edited by mainermikeyd; 09-06-2009 at 10:46 PM.

09-07-2009, 08:01 AM	#154
mainermikeyd Registered User Join Date: Sep 2008 Location: Limington, ME Posts: 290	Re: Parting out 85 GMC Sierra Classic 2500 2wd* How much of the front frame is left?? Pics would help, I need a patch panel from each frame rail about 23" long(a little long but on the safe side), if they didnt cut away too much, I need to replace where my front spring perch rivets/bolts to the frame for my rear leaf springs, can you help me out?? __________________ Once a Marine Always a Marine OOH-RAH GM Fanatic 1982 K20 4" Rancho lift 350cid, edelbrock performer intake 1405 carb, hedman headers, TH350, " Wheres the MUD!!!!!!!!!!" 1986 c30 camper special 454, th400 (for sale) 1984 K10 Big Ten (project) needs motor 1984 C10 355, 700r4, (project) needs shortbox bed

09-08-2009, 10:20 AM	#156
mainermikeyd Registered User Join Date: Sep 2008 Location: Limington, ME Posts: 290	Re: Parting out 85 GMC Sierra Classic 2500 2wd* No it wont thanks though __________________ Once a Marine Always a Marine OOH-RAH GM Fanatic 1982 K20 4" Rancho lift 350cid, edelbrock performer intake 1405 carb, hedman headers, TH350, " Wheres the MUD!!!!!!!!!!" 1986 c30 camper special 454, th400 (for sale) 1984 K10 Big Ten (project) needs motor 1984 C10 355, 700r4, (project) needs shortbox bed

09-12-2009, 05:21 AM	#157
rod86 great southern land Join Date: Feb 2008 Location: perth - australia Posts: 6,194	Re: Parting out 85 GMC Sierra Classic 2500 2wd* do you still have the quater vent window s from both doors? wat condition are they in? need the whole vent window assemblies. thanks __________________ rod 86 chevy c10 silverado Last edited by rod86; 09-12-2009 at 05:22 AM.

09-12-2009, 02:43 PM	#159
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Parting out 85 GMC Sierra Classic 2500 2wd* Dang dude, lots of great parts. How many trucks do you have? __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

09-27-2009, 11:11 PM	#168
Still Looken Registered User Join Date: Feb 2005 Location: Fort Lawn SC Posts: 8	Re: Parting out 85 GMC Sierra Classic 2500 2wd* Do you have the upper and lower radiator retainers and possibly the pads? If so how much shipped to 29720. Thanks

09-28-2009, 08:58 PM	#170
Still Looken Registered User Join Date: Feb 2005 Location: Fort Lawn SC Posts: 8	Re: Parting out 85 GMC Sierra Classic 2500 2wd* That would be great, if you have them. I can still get new rubber pads from LMC.

10-03-2009, 08:26 PM	#171
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 85 GMC Sierra Classic 2500 2wd* pics Attached Images

10-03-2009, 08:28 PM	#172
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 85 GMC Sierra Classic 2500 2wd* chrome trim pics... Attached Images

11-01-2009, 09:41 AM	#173
benms79 Registered User Join Date: Sep 2009 Location: rocky mount n.c Posts: 24	Re: Parting out 85 GMC Sierra Classic 2500 2wd* Looking for front plastic spoiler,goes under bumper 81-87. Let me no if you have one thnx ben __________________ 85 silverado

11-08-2009, 06:30 PM	#175
wildmanaaron Registered User Join Date: Mar 2002 Location: Bowling Green, KY Posts: 396	Re: Parting out 85 GMC Sierra Classic 2500 2wd* I need a piece of the door jamb where the door striker goes. It is raised a little and the door striker bolts to that. Just a 4" by 4" section roughly is what I need of the drivers side. I will post a picture of the area I need later today.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.