The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board > projects and builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-24-2018, 05:42 PM   #726
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

This little carbon plate is the basis for the nitrous switch panel/controls that I'm putting together.
Attached Images
   
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 07-20-2018, 07:20 PM   #727
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

Laid out the switches back on the carbon panel and drilled it to accept them.

Then I started getting the Nitrous Express plate kit going. Pulled off the stock TB and tested out the fitment of the plate body.
Attached Images
    
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 07-20-2018, 07:22 PM   #728
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

The stock studs didn't fit with the extra length of the plate, and since my kit was obtained new-used, I didn't have the included studs the kit would give you. I just measured the thread and made some new studs from matching rod.
Attached Images
     
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 07-22-2018, 04:57 PM   #729
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

The nitrous plate the throttle body bolted back down with the new studs. The TB and everything still clear the engine cover neatly. The top portion of the cover is the tightest, but doesn't hit the plate and still leaves room for the hoses and fittings that need to connect to it.
Attached Images
   
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 07-29-2018, 10:14 AM   #730
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

I've had a persistent power steering leak for a while now. The input shaft on my old steering box seeped incessantly so it was due to a replacement. I figured it was a good time to ditch the stack-o-washers and update to the CaptainFab bracket.
Attached Images
     
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 07-29-2018, 10:20 AM   #731
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

Moved forward with some work on the switch panel, getting it drilled on the carbon and marking the underlaying panel to be trimmed.

My nitrous solenoids came in, and Summit made a lil error in my favor! I ordered a setup of Nitrous Express solenoids; when the order showed up, my n20 noid was the ProMod version (the all aluminum body).

Took a few moments and bend/welded/drilled a little bracket to hold my solenoids up and back out of the way on the rear of the motor.
Attached Images
    
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 08-17-2018, 10:57 AM   #732
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

More photo updates coming to get you guys to speed, but for those of you that like my video uploads, here's a little state-of-the-truck.

__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 09-27-2018, 05:13 PM   #733
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

Wanted to get some backlogged pics up from the ongoing stuff.

Got that bracket mounted up and placed the noids. The lines tucked under the motor cover pretty well, and I got the purge bent up to the cowl. Because I'm using the car nitrous plate, I made a blockoff for the EVAP solenoid so the lines could run clean to the plate.
Attached Images
    
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 09-27-2018, 05:20 PM   #734
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

Here's the lines under the engine cover. They tucked pretty well and managed to lay flat enough as to not interfere with any of the other stuff in the area.
Attached Images
   
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 09-28-2018, 12:37 AM   #735
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: Br3w City's Project omgwtfbbq

Nice work on the plumbing and bracket.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 09-28-2018, 02:07 PM   #736
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

Thanks Cap. It seems like 1 out of every 10 projects on my truck seems to involve a part you made lol.


Got back to work on the wiring for the nitrous switch panel and its relays.
Attached Images
    
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 09-28-2018, 02:09 PM   #737
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

Also got around to finally boxing in those hood mounts I did a while back. Finally doesn't flex at all any more, cleans up the look a bit, and still has an open bottom to allow for access to the bolts.
Attached Images
    
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 10-11-2018, 10:34 AM   #738
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

Painted up Cap's P/S bracket and got everything mounted back up to the frame.
Attached Images
    
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 10-11-2018, 10:38 AM   #739
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

Because of the odd shape and articulation of my bed floor, I've gone thru a few variants of wheel tub design to accommodate it. The first one I did way back was too thin and looked flimsy upon install.

This time I went with a matching-gauge aluminum and tried a more angular polygonal approach. It leaves the bed more usable and gives a little more protection. I've got a few attachment ideas, but I may not even stick with this design as things move forward. I've become so used to no wheel covers that the look has grown on me.
Attached Images
     
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 10-14-2018, 08:31 PM   #740
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

Dug out my old front D52 calipers since I'll be re purposing them for the rear disc swap. Cleaned them up good, then came back with caliper paint to protect them and give them a look germane to that of the front brakes.
Attached Images
    
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 10-14-2018, 08:35 PM   #741
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

Oh hell yea! My new rear wheels have finally showed up! Holeshot Racing Wheels 15x11 3-piece aluminum wheels. Waited nearly 6 weeks for these to get made, then shipped, but from what I've heard lately thats not insane for special order race wheels.

The change in width allows me to keep the same tire, but change the backspace a bit and better allow for the D52 brake conversion I'm setting up for. Black spun aluminum hoop with a gold center section.
Attached Images
     
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 10-14-2018, 09:12 PM   #742
joesscamaro
Registered User
 
Join Date: Sep 2008
Location: Newport, North Carolina
Posts: 611
Re: Br3w City's Project omgwtfbbq

Love the wheels! They’re going to look great!
joesscamaro is offline   Reply With Quote
Old 10-19-2018, 10:46 AM   #743
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

Thanks Joe! Figured I'd update the video-watching crowd as well.


__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 10-20-2018, 12:37 AM   #744
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: Br3w City's Project omgwtfbbq

I do like the gold. On the lug nuts, if you have any plating shops in your area, you might be able to have the chrome stripped and then have them yellow zinc plated.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 10-20-2018, 03:30 PM   #745
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

Yea thats a good thought Cap. I've got a guy that does ceramicoating and powder for us, I should ask about Zinc. They have actually been gun blued to a copper-ish color for now. I'll put some pics up soon.

Also, I got those fine thread nuts. Thanks for shooting them over to me.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 10-21-2018, 12:25 AM   #746
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: Br3w City's Project omgwtfbbq

The ceramic coating might hold up also if the chrome is removed and maybe sand blasted. Is it Cerakote?
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 10-22-2018, 11:04 AM   #747
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

Quote:
Originally Posted by Captainfab View Post
The ceramic coating might hold up also if the chrome is removed and maybe sand blasted. Is it Cerakote?
Its either Cerakote or Jet Hot, I can't remember exactly. I'll be in touch with him later this week and find out.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 11-05-2018, 06:26 PM   #748
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

Got the tires mounted up and snuck a quick test fit on the new wheels.
Attached Images
    
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 11-08-2018, 04:45 PM   #749
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

Started doing a little more prep for the rear brake setup. Got my rotors, and a some mockup with Captain's brackets.
Attached Images
   
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 11-19-2018, 01:28 AM   #750
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Br3w City's Project omgwtfbbq

Update on the brakes

__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:36 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com