Will Chevy 1500 fenders, hood, and bumper fit on on GMC 3500? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Thedude5804 · 07-29-2017, 02:11 PM

I have a 97 GMC 3500. Im considering buying a 95 Chevy 1500 for parts. Will the front fenders, hood and bumper (maybe the grille too) swap over easy enough? I cant imagine they are different. Thanks in Advance!

**Palf70Step** · 07-29-2017, 02:16 PM

Everything I have seen says yes they will fit. I believe the fenders are interchangeable, but the front grill pieces, you have to have all GMC or all Chevy.

**special-K** · 08-01-2017, 09:32 PM

Yes, everything bolts up the same. I had a K3500, which came with fender flares, and I wanted to use Bushwacker Extend-A-Flares that give another inch of tire coverage, but don't cover as much of the fender to cover factory flare mount holes. I swapped some non-flare fenders on, which are the only other fender GM used. Anything that didn't have fender flares used the same fender, anything with flares used the same fender, and both interchanged.

Thedude5804 · 08-01-2017, 09:36 PM

Yeah everything but the bumper worked fine. My bumper brackets were bent so that may have been it. But it all went good. Thanks for all the confirmation
Posted via Mobile Device

07-29-2017, 02:11 PM	#1
Thedude5804 Registered User Join Date: Jul 2017 Location: windham Posts: 20	Will Chevy 1500 fenders, hood, and bumper fit on on GMC 3500? I have a 97 GMC 3500. Im considering buying a 95 Chevy 1500 for parts. Will the front fenders, hood and bumper (maybe the grille too) swap over easy enough? I cant imagine they are different. Thanks in Advance!

07-29-2017, 02:16 PM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,634	Re: Will Chevy 1500 fenders, hood, and bumper fit on on GMC 3500? Everything I have seen says yes they will fit. I believe the fenders are interchangeable, but the front grill pieces, you have to have all GMC or all Chevy. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

08-01-2017, 09:32 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Will Chevy 1500 fenders, hood, and bumper fit on on GMC 3500? Yes, everything bolts up the same. I had a K3500, which came with fender flares, and I wanted to use Bushwacker Extend-A-Flares that give another inch of tire coverage, but don't cover as much of the fender to cover factory flare mount holes. I swapped some non-flare fenders on, which are the only other fender GM used. Anything that didn't have fender flares used the same fender, anything with flares used the same fender, and both interchanged. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-01-2017, 09:36 PM	#4
Thedude5804 Registered User Join Date: Jul 2017 Location: windham Posts: 20	Yeah everything but the bumper worked fine. My bumper brackets were bent so that may have been it. But it all went good. Thanks for all the confirmation Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.