60-66 Chevy And GMC 4X4's Gone Wild - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MikeS. · 01-23-2013, 10:39 AM

Quote:

Originally Posted by Boshos

Here is my 61, work in progress. Next step is to clean the frame up and then paint the bed I have to match. Not a bad score for $1000, runs great.

Nice lookin 4x and Welcome to the board.
Posted via Mobile Device

MikeS. · 01-23-2013, 10:44 AM

Quote:

Originally Posted by BLK65K10

Here are a few photos of my wife's great aunt's 64 K10. These were slides we scanned and were dated 1969 and 1970. Enjoy. I couldn't get my 65 K10 black custom cab BBW photos to upload. I will try again later. Thanks for the great site. I sure am glad to know I'm not the only one who is crazy(about these trucks).
Attachment 1045933

Attachment 1045934

Attachment 1045935

Attachment 1045936

Attachment 1045937

Hey blk65 thanks for sharing those and Welcome to the board.
Posted via Mobile Device

**LostMy65** · 01-26-2013, 10:01 PM

65crewcab · 01-29-2013, 10:33 PM

Hello. I noticed some interest in my truck so I thought I would join. I have finally completed my 65 one ton 4x4 crew cab. It took me almost 3 years to complete this restoration and its now my daily driver. It is powered with a Cummins 6bt and an Allison 1000. The entire truck is Chevrolet except for the motor. My next project is a 64 Suburban with factory 4x4.

65crewcab · 01-29-2013, 10:38 PM

Hello. I noticed some interest in my truck so I thought I would join. I have finally completed my 65 one ton 4x4 crew cab. It took me almost 3 years to complete this restoration and its now my daily driver. It is powered with a Cummins 6bt and an Allison 1000. The entire truck is Chevrolet except for the motor. My next project is a 64 Suburban with factory 4x4.

66Gilbert · 01-29-2013, 10:43 PM

Wow Joe,

I was wondering when you were going to join. I went by your house a few times to snap some pictures of your awesome truck, but it seems that you are always out crusing and enjoying yourself with this one of a kind ride. I can't wait to see what you do with the Suburban!! Welcome to the board.

LVPhotos · 01-29-2013, 11:33 PM

I will be going back to the fishing trailer soon. Want to pick up GMC 4X4. What to save and what to toss? The v6 goes in lue of big block, 4 speed for auto, knees can't do two sticks. Axles,??? Or sell whole and kill a non 4x4 and balls out?
Posted via Mobile Device

BLK65K10 · 01-29-2013, 11:33 PM

Very cool ride 65crewcab. Glad to hear its a driver. The best part about these trucks is when they are rolling down the road though they are nice to look at too.

Slow Build · 01-30-2013, 12:12 AM

Quote:

Originally Posted by 65crewcab

I have finally completed my 65 one ton 4x4 crew cab.

Sweet rig.

Got any pics of the interior of that bad boy?

**Captainfab** · 01-30-2013, 02:03 AM

X2

Very cool rig.

Yes we need some more pics of your truck.

Quote:

Originally Posted by Slow Build

Sweet rig.

Got any pics of the interior of that bad boy?

FetchMeAPepsi · 01-30-2013, 09:25 AM

Quote:

Originally Posted by LVPhotos

I will be going back to the fishing trailer soon. Want to pick up GMC 4X4. What to save and what to toss? The v6 goes in lue of big block, 4 speed for auto, knees can't do two sticks. Axles,??? Or sell whole and kill a non 4x4 and balls out?
Posted via Mobile Device

That historic V6 in GMCs has stupid high torque. Why scrap it? You need to race it and be able to take it to the cabin too?

You could just buy an auto GMC 4x4 and drive the wheels off of it. Save a lot of dough too. If you do swap the engine don't scrap it. Someone will definitely snag it up from you.

**chevy_man5** · 01-30-2013, 10:55 AM

Quote:

Originally Posted by LVPhotos

I will be going back to the fishing trailer soon. Want to pick up GMC 4X4. What to save and what to toss? The v6 goes in lue of big block, 4 speed for auto, knees can't do two sticks. Axles,??? Or sell whole and kill a non 4x4 and balls out?
Posted via Mobile Device

Technically the V6 IS a big block. LOL It's just a little one! I know of a member with the adapter to put an automatic behind it. It's not cheap though!

GMC 4x4 is the way to go!!

MikeS. · 01-30-2013, 02:09 PM

Joe I'd definitely would like to see some pics of the engine bay and the interior of the cab.

Thanks for sharing this with us.
Posted via Mobile Device

piratexpress1369a · 01-30-2013, 04:14 PM

that is a cool ride there joe

65crewcab · 01-30-2013, 09:42 PM

Here are a few more pics. I need to take some more current photos. The windows are now tinted and the spray in bedliner done. The guys at Inyati had said they were going to put it on their website. The only real mod I want to do now is add some chrome running boards so my wife and kids can get in.

65crewcab · 01-30-2013, 09:51 PM

...

mud.man.rj · 01-30-2013, 10:06 PM

Wow, more impressed every time I look at it, some well thought out work. How does the diesel move the truck weight wise.

65crewcab · 01-31-2013, 12:01 AM

Like everything I had to make some compromises, but overall I'm happy with the way it turned out. I hot rodded the Cummins so it moves the truck along pretty well, though a newer engine would have provided more power. I had enough trouble with matching the Allison 1000 (OD) with the Cummins and didn't want to tackle a computer controlled engine. Believe it or not I would have had to use the instrument cluster out of the donor truck among countless other parts. Besides there is no way I would put a Dodge tranny in my Chevy! With this combo it has no trouble pulling my boat and I can climb a 6% grade at 75 if I'm empty. The best part is 17mpg, especially with a heavy truck with 35's on it. I've yet to weigh it.

**Captainfab** · 01-31-2013, 02:15 AM

That is truely a well thought out and executed truck you've built

Did you use a newer frame?

65crewcab · 01-31-2013, 11:39 PM

The frame is a factory 1965 157" WB with matching VIN to the cab. The truck was a C30 cab chassis with a 10ft frame. The cab was stretched by Armbruster Stageway Co, most likely in '65, but the frame was not lengthened. I put in a late model rear Gm 14 bolt axle and took off the duals and then added the Dana 60 front. It was a lot more work but I was able to maintain the original appearance.

65crewcab · 01-31-2013, 11:41 PM

Captainfab, got any pics of that C 60. If I had the room I would love to have one!

'63GENIII · 01-31-2013, 11:47 PM

Hey Joe. That truck is ridiculously cool! Great job on the conversion
Posted via Mobile Device

mud.man.rj · 01-31-2013, 11:59 PM

The nice thing about the truck is a lot of people in general would think it is factory, in the real world , not our's online.

**Captainfab** · 02-01-2013, 01:57 AM

Sorry, no I don't have any on this computer......it's not much to look at. It's ugly and dirty and covered with snow right now.

Quote:

Originally Posted by 65crewcab

Captainfab, got any pics of that C 60. If I had the room I would love to have one!

66Gilbert · 03-03-2013, 01:15 PM

A Walk Around Video And A Couple Of Pics Of A Nice 1964 Long Bed 4X4.

1964 CHEVY 4X4 - YouTube

01-26-2013, 10:01 PM	#453
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,482	Re: 60-66 Chevy And GMC 4X4's Gone Wild __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

01-29-2013, 10:33 PM	#454
65crewcab Registered User Join Date: Jan 2013 Location: Clarkdale, AZ Posts: 7	Re: 60-66 Chevy And GMC 4X4's Gone Wild Hello. I noticed some interest in my truck so I thought I would join. I have finally completed my 65 one ton 4x4 crew cab. It took me almost 3 years to complete this restoration and its now my daily driver. It is powered with a Cummins 6bt and an Allison 1000. The entire truck is Chevrolet except for the motor. My next project is a 64 Suburban with factory 4x4. Attached Images __________________ Joe

01-29-2013, 10:38 PM	#455
65crewcab Registered User Join Date: Jan 2013 Location: Clarkdale, AZ Posts: 7	Re: 60-66 Chevy And GMC 4X4's Gone Wild Hello. I noticed some interest in my truck so I thought I would join. I have finally completed my 65 one ton 4x4 crew cab. It took me almost 3 years to complete this restoration and its now my daily driver. It is powered with a Cummins 6bt and an Allison 1000. The entire truck is Chevrolet except for the motor. My next project is a 64 Suburban with factory 4x4. Attached Images __________________ Joe

01-29-2013, 10:43 PM	#456
66Gilbert 1966 Crew Cab & 4X4 Fanatic Join Date: Dec 2005 Location: Arizona Posts: 904	Re: 60-66 Chevy And GMC 4X4's Gone Wild Wow Joe, I was wondering when you were going to join. I went by your house a few times to snap some pictures of your awesome truck, but it seems that you are always out crusing and enjoying yourself with this one of a kind ride. I can't wait to see what you do with the Suburban!! Welcome to the board. Last edited by 66Gilbert; 01-29-2013 at 10:51 PM.

01-29-2013, 11:33 PM	#457
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,851	Re: 60-66 Chevy And GMC 4X4's Gone Wild I will be going back to the fishing trailer soon. Want to pick up GMC 4X4. What to save and what to toss? The v6 goes in lue of big block, 4 speed for auto, knees can't do two sticks. Axles,??? Or sell whole and kill a non 4x4 and balls out? Posted via Mobile Device __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

01-29-2013, 11:33 PM	#458
BLK65K10 Registered User Join Date: Mar 2012 Location: Bonners Ferry Idaho Posts: 1,024	Re: 60-66 Chevy And GMC 4X4's Gone Wild Very cool ride 65crewcab. Glad to hear its a driver. The best part about these trucks is when they are rolling down the road though they are nice to look at too.

01-30-2013, 02:09 PM	#463
MikeS. Registered User Join Date: Sep 2011 Location: FarEastern WVa Posts: 1,691	Re: 60-66 Chevy And GMC 4X4's Gone Wild Joe I'd definitely would like to see some pics of the engine bay and the interior of the cab. Thanks for sharing this with us. Posted via Mobile Device __________________ Past Master Triluminar Lodge #117 GL of WVa My 1963 4x4 Suburban build; http://67-72chevytrucks.com/vboard/s...d.php?t=531274 My Gallery, now with pics of my 1966 C30 motorhome. http://67-72chevytrucks.com/gallery/...&ppuser=103447

01-30-2013, 04:14 PM	#464
piratexpress1369a Registered User Join Date: Jun 2012 Location: Selkirk Ontario Canada Posts: 1,141	Re: 60-66 Chevy And GMC 4X4's Gone Wild that is a cool ride there joe __________________ My 63 GMC Panel Slow Build http://67-72chevytrucks.com/vboard/s...=1#post5457281 63

01-30-2013, 09:42 PM	#465
65crewcab Registered User Join Date: Jan 2013 Location: Clarkdale, AZ Posts: 7	Re: 60-66 Chevy And GMC 4X4's Gone Wild Here are a few more pics. I need to take some more current photos. The windows are now tinted and the spray in bedliner done. The guys at Inyati had said they were going to put it on their website. The only real mod I want to do now is add some chrome running boards so my wife and kids can get in. Attached Images __________________ Joe

01-30-2013, 09:51 PM	#466
65crewcab Registered User Join Date: Jan 2013 Location: Clarkdale, AZ Posts: 7	Re: 60-66 Chevy And GMC 4X4's Gone Wild ... Attached Images __________________ Joe

01-30-2013, 10:06 PM	#467
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: 60-66 Chevy And GMC 4X4's Gone Wild Wow, more impressed every time I look at it, some well thought out work. How does the diesel move the truck weight wise.

01-31-2013, 12:01 AM	#468
65crewcab Registered User Join Date: Jan 2013 Location: Clarkdale, AZ Posts: 7	Re: 60-66 Chevy And GMC 4X4's Gone Wild Like everything I had to make some compromises, but overall I'm happy with the way it turned out. I hot rodded the Cummins so it moves the truck along pretty well, though a newer engine would have provided more power. I had enough trouble with matching the Allison 1000 (OD) with the Cummins and didn't want to tackle a computer controlled engine. Believe it or not I would have had to use the instrument cluster out of the donor truck among countless other parts. Besides there is no way I would put a Dodge tranny in my Chevy! With this combo it has no trouble pulling my boat and I can climb a 6% grade at 75 if I'm empty. The best part is 17mpg, especially with a heavy truck with 35's on it. I've yet to weigh it. __________________ Joe

01-31-2013, 02:15 AM	#469
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: 60-66 Chevy And GMC 4X4's Gone Wild That is truely a well thought out and executed truck you've built Did you use a newer frame? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-31-2013, 11:39 PM	#470
65crewcab Registered User Join Date: Jan 2013 Location: Clarkdale, AZ Posts: 7	Re: 60-66 Chevy And GMC 4X4's Gone Wild The frame is a factory 1965 157" WB with matching VIN to the cab. The truck was a C30 cab chassis with a 10ft frame. The cab was stretched by Armbruster Stageway Co, most likely in '65, but the frame was not lengthened. I put in a late model rear Gm 14 bolt axle and took off the duals and then added the Dana 60 front. It was a lot more work but I was able to maintain the original appearance. __________________ Joe

01-31-2013, 11:41 PM	#471
65crewcab Registered User Join Date: Jan 2013 Location: Clarkdale, AZ Posts: 7	Re: 60-66 Chevy And GMC 4X4's Gone Wild Captainfab, got any pics of that C 60. If I had the room I would love to have one! __________________ Joe



Register or Log In To remove these advertisements.

01-31-2013, 11:47 PM	#472
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: 60-66 Chevy And GMC 4X4's Gone Wild Hey Joe. That truck is ridiculously cool! Great job on the conversion Posted via Mobile Device __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

01-31-2013, 11:59 PM	#473
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: 60-66 Chevy And GMC 4X4's Gone Wild The nice thing about the truck is a lot of people in general would think it is factory, in the real world , not our's online.

Register or Log In To remove these advertisements.