Full Floater Bolt In For 67-72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SoCalK20 · 01-23-2012, 11:03 AM

Hey guys. Can't find this info and didn't tag it at the time. Awhile back there was a thread regarding a 14 bolt setup that would be a very close bolt in for 67-72 trucks. It was said to from a cab over truck that had spring perches already placed correctly. Anybody know for sure, what years, info, etc. Thanks

Mike C · 01-23-2012, 07:37 PM

73-86 one ton trucks have 40.5" spring centers, same as a 4x4 67-72. Shock mounts have to be re-done. 3/4 ton trucks have 42.5" spring centers so shock mounts and spring pads need to be moved.

SoCalK20 · 01-23-2012, 09:30 PM

Mike C, Thanks, you 'da man.

odog · 01-23-2012, 10:02 PM

tagging for future refrence

SoCalK20 · 01-23-2012, 11:24 PM

Mike C-
One more question, if i could. This would be for a K20, do I need to look for 4x4 axle or 2 wheel drive or does it matter. Just trying to narrow down the search. Thanks

Mike C · 01-24-2012, 08:00 PM

I think they are all 42.5 in the '73-'87, but don't remember for sure. The 67-72 all of the 4x4 are 40.5 and the 4x2 are 42.5.

SoCalK20 · 01-24-2012, 10:45 PM

Mike C,

Thanks again.

01-23-2012, 11:03 AM	#1
SoCalK20 Registered User Join Date: Jan 2012 Location: San Diego, CA Posts: 25	Full Floater Bolt In For 67-72 Hey guys. Can't find this info and didn't tag it at the time. Awhile back there was a thread regarding a 14 bolt setup that would be a very close bolt in for 67-72 trucks. It was said to from a cab over truck that had spring perches already placed correctly. Anybody know for sure, what years, info, etc. Thanks

01-23-2012, 07:37 PM	#2
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,712	Re: Full Floater Bolt In For 67-72 73-86 one ton trucks have 40.5" spring centers, same as a 4x4 67-72. Shock mounts have to be re-done. 3/4 ton trucks have 42.5" spring centers so shock mounts and spring pads need to be moved. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

01-23-2012, 09:30 PM	#3
SoCalK20 Registered User Join Date: Jan 2012 Location: San Diego, CA Posts: 25	Re: Full Floater Bolt In For 67-72 Mike C, Thanks, you 'da man.

01-23-2012, 10:02 PM	#4
odog Registered User Join Date: Oct 2007 Location: Wendell, Idaho Posts: 608	Re: Full Floater Bolt In For 67-72 tagging for future refrence __________________ 1969 4x4 Nothing beats a good rock drill and some dynamite

01-23-2012, 11:24 PM	#5
SoCalK20 Registered User Join Date: Jan 2012 Location: San Diego, CA Posts: 25	Re: Full Floater Bolt In For 67-72 Mike C- One more question, if i could. This would be for a K20, do I need to look for 4x4 axle or 2 wheel drive or does it matter. Just trying to narrow down the search. Thanks

01-24-2012, 08:00 PM	#6
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,712	Re: Full Floater Bolt In For 67-72 I think they are all 42.5 in the '73-'87, but don't remember for sure. The 67-72 all of the 4x4 are 40.5 and the 4x2 are 42.5. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

01-24-2012, 10:45 PM	#7
SoCalK20 Registered User Join Date: Jan 2012 Location: San Diego, CA Posts: 25	Re: Full Floater Bolt In For 67-72 Mike C, Thanks again.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.