|
09-16-2014, 05:23 PM
|
#1 |
|
Registered User
Join Date: Jul 2010
Location: jacksonville nc
Posts: 1,229
|
02 silverado seats...
I got a nice set of 02 silverado seats, I pulled my bench seat out and set them in there (looks real good), but they are really high (I knew they would be) has anyone done a similar seat swap? If so could I get some step by step direction? Any help would be appreciated
I used to cruise this section all the time til I did my swap but still check out this section from time to time
__________________
Sgt Dennis Heineman USMC Aviation Ordnance I.Y.A.O.Y.A.S 2001-Present 84 K10 2000 trans am ws6 2011 nissan altima 2009 Troy Built with a 42 Inch Deck  My LS Swap http://67-72chevytrucks.com/vboard/s...=1#post6559371 |
|
|
|
09-28-2014, 12:44 AM
|
#2 |
|
BMW & ASE Master Certified
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,255
|
Re: 02 silverado seats...
Pretty much need to make custom brackets. I'm 6'6 and have the exact same seats and I have read room to spare. No pictures of the brackets..
Clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress |
|
|
|
|
09-28-2014, 01:00 AM
|
#3 |
|
Registered User
Join Date: Dec 2012
Location: Temple City
Posts: 3,559
|
Re: 02 silverado seats...
I thought guy's who did that swap moved the gas tanks, and lowered the floor.
|
|
|
|
|
09-28-2014, 01:04 PM
|
#4 |
|
BMW & ASE Master Certified
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,255
|
Re: 02 silverado seats...
Some do and they used the brackets that came with the seat iirc.
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress |
|
|
|
|
09-28-2014, 02:08 PM
|
#5 |
|
Registered User
Join Date: Jul 2010
Location: jacksonville nc
Posts: 1,229
|
Re: 02 silverado seats...
i would like to keep the power to the seats and but lower the seats,and the seat belts, i thought of using the bracket to the stock seat but looking for other ideas as well, I've swapped seats before but it was a lot easier since they was just buckets
__________________
Sgt Dennis Heineman USMC Aviation Ordnance I.Y.A.O.Y.A.S 2001-Present 84 K10 2000 trans am ws6 2011 nissan altima 2009 Troy Built with a 42 Inch Deck My LS Swap http://67-72chevytrucks.com/vboard/s...=1#post6559371 |
|
|
|
|
09-28-2014, 02:29 PM
|
#6 |
|
Registered User
Join Date: Dec 2012
Location: Temple City
Posts: 3,559
|
Re: 02 silverado seats...
I took the simple way on my truck, and used 04 Cavalier seats on the stock bench slider. It fits great, and leaves plenty of room behind the seat for a full back pack.
My truck is a K20, and they in my mind will be a great set of seats for my truck. They offer a lot of side bolstering so I don't just fall out, but not enough to keep me looked in when I need to look around. Plus a bonus the whole thing is 1/2 the weigh of the previous bench, and ride pretty comfy. At least for the 4 miles I traveled so far. |
|
|
|
|
09-28-2014, 02:34 PM
|
#7 | |
|
Registered User
Join Date: Jul 2010
Location: jacksonville nc
Posts: 1,229
|
Re: 02 silverado seats...
Quote:
__________________
Sgt Dennis Heineman USMC Aviation Ordnance I.Y.A.O.Y.A.S 2001-Present 84 K10 2000 trans am ws6 2011 nissan altima 2009 Troy Built with a 42 Inch Deck My LS Swap http://67-72chevytrucks.com/vboard/s...=1#post6559371 |
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
