Need help (pics) Identifying parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72K5CSTDarkOlive · 07-20-2017, 12:46 AM

Can anyone help me identify these parts? The plastic piece inside the cowl and whatever is coming out from it. close up pics of inside the cowl would be super helpful. Thanks

72K5CSTDarkOlive · 07-20-2017, 01:11 AM

I submitted this in my build thread but hoping to find help asap.

The Factory Assembly Manual refers to the L Shape tube as a "shaft" (#21) in the diagram. I found the metal piece ( also referred to as crank from others on here) that slides into the shaft and attached via a screw. (#3) "Cap" and (#4) "Bearing" stated in the diagram is where I am lost.

The Spring (#2) Looks like it attaches to the top side of the cowl and the other end connects to something, I have no idea what, shown here in the diagram (#1) Valve ASM at the bottom right corner.

What does this "Cap" (#3) look like? Is it available? Are there alternative options?

What about the "Bearing" (#4) Is it available? Are there alternative options?

Appreciate any help from the board. Thanks!

**1rippen6** · 07-20-2017, 07:31 AM

I have a few pictures I can post tonight. Not the greatest should have taken better ones. I should have everything you need if you don't have it.

1972 Jimmy · 07-20-2017, 08:44 AM

I also can take some pics for you tonight. I'm currently putting my A/C back together as well.

Eric

72K5CSTDarkOlive · 07-20-2017, 09:35 AM

Quote:

Originally Posted by 1rippen6

I have a few pictures I can post tonight. Not the greatest should have taken better ones. I should have everything you need if you don't have it.

Quote:

Originally Posted by 1972 Jimmy

I also can take some pics for you tonight. I'm currently putting my A/C back together as well.

Eric

Yes, Please!! the more the better.

@1rippen - I'm not entirely sure which pieces I need. I know I don't have the ones I mentioned above, (Cap, Bearing, Spring) but there could be other parts, but without knowing what I'm looking at I don't know.

And whatever goes in those two holes in the cowl (Dash side) pictured above. I'll need these too.

Thanks guys

**1rippen6** · 07-20-2017, 10:02 AM

http://67-72chevytrucks.com/vboard/s...=505987&page=9

Check out post 212

72K5CSTDarkOlive · 07-20-2017, 02:23 PM

Quote:

Originally Posted by 1rippen6

http://67-72chevytrucks.com/vboard/s...=505987&page=9

Check out post 212

I'm missing all of this. Do you have any of these parts?

**1rippen6** · 07-20-2017, 02:34 PM

Yep, should have everything off that rough jimmy I just scrapped.

72K5CSTDarkOlive · 07-20-2017, 03:23 PM

Quote:

Originally Posted by 1rippen6

Yep, should have everything off that rough jimmy I just scrapped.

PM Sent

07-20-2017, 10:02 AM	#6
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,695	Re: Need help (pics) Identifying parts http://67-72chevytrucks.com/vboard/s...=505987&page=9 Check out post 212

07-20-2017, 02:34 PM	#8
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,695	Re: Need help (pics) Identifying parts Yep, should have everything off that rough jimmy I just scrapped.

07-20-2017, 12:46 AM	#1
72K5CSTDarkOlive Registered User Join Date: Aug 2013 Location: Central Coast, CA Posts: 774	Need help (pics) Identifying parts Can anyone help me identify these parts? The plastic piece inside the cowl and whatever is coming out from it. close up pics of inside the cowl would be super helpful. Thanks Attached Images __________________ My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive

07-20-2017, 01:11 AM	#2
72K5CSTDarkOlive Registered User Join Date: Aug 2013 Location: Central Coast, CA Posts: 774	Re: Need help (pics) Identifying parts I submitted this in my build thread but hoping to find help asap. The Factory Assembly Manual refers to the L Shape tube as a "shaft" (#21) in the diagram. I found the metal piece ( also referred to as crank from others on here) that slides into the shaft and attached via a screw. (#3) "Cap" and (#4) "Bearing" stated in the diagram is where I am lost. The Spring (#2) Looks like it attaches to the top side of the cowl and the other end connects to something, I have no idea what, shown here in the diagram (#1) Valve ASM at the bottom right corner. What does this "Cap" (#3) look like? Is it available? Are there alternative options? What about the "Bearing" (#4) Is it available? Are there alternative options? Appreciate any help from the board. Thanks! Attached Images __________________ My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive Last edited by 72K5CSTDarkOlive; 07-20-2017 at 02:14 AM.

07-20-2017, 07:31 AM	#3
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,695	Re: Need help (pics) Identifying parts I have a few pictures I can post tonight. Not the greatest should have taken better ones. I should have everything you need if you don't have it.

07-20-2017, 08:44 AM	#4
1972 Jimmy Registered User Join Date: Nov 2012 Location: Freeland, Michigan Posts: 1,385	Re: Need help (pics) Identifying parts I also can take some pics for you tonight. I'm currently putting my A/C back together as well. Eric



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.