1968 K2500 power steering box mounting - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bob's 70c-10 · 03-10-2017, 01:14 PM

Hello, I'm new to the site and I have a question that hopefully someone can help with. I have a 68 K2500 and I'm doing a p/s conversion. I have all the necessary parts including a captionfab plate (excellent piece highly recommend) to mount the box, but what I need help with is some measurements as well has any important advise about the placement of the box on the frame. Any help would be greatly appreciated. As well as links to threads that have done this on a 67 or 68 4x4
Thanks
Bob

**First c10** · 03-13-2017, 02:42 PM

Welcome to the site Bob,

My captainfab bracket came with an instruction sheet or template.
Here a a link to mine, sorry it doesn't have step by step but it does have pictures Post 60 or so

Hulk Jr Power steering

scroll down the page.

post up your progress with pictures....
Good Luck!!

Bob's 70c-10 · 03-13-2017, 03:11 PM

Thanks for the reply first c-10
I didn't receive instructions with the plate.I was able to use threads like your and others I was able to get it figured out.
Thanks again for your help.

**First c10** · 03-13-2017, 04:17 PM

good to hear!

03-10-2017, 01:14 PM	#1
Bob's 70c-10 Registered User Join Date: Feb 2013 Location: Novato ca Posts: 2	1968 K2500 power steering box mounting Hello, I'm new to the site and I have a question that hopefully someone can help with. I have a 68 K2500 and I'm doing a p/s conversion. I have all the necessary parts including a captionfab plate (excellent piece highly recommend) to mount the box, but what I need help with is some measurements as well has any important advise about the placement of the box on the frame. Any help would be greatly appreciated. As well as links to threads that have done this on a 67 or 68 4x4 Thanks Bob

03-13-2017, 02:42 PM	#2
First c10 Senior Member Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: 1968 K2500 power steering box mounting Welcome to the site Bob, My captainfab bracket came with an instruction sheet or template. Here a a link to mine, sorry it doesn't have step by step but it does have pictures Post 60 or so Hulk Jr Power steering scroll down the page. post up your progress with pictures.... Good Luck!! __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

03-13-2017, 03:11 PM	#3
Bob's 70c-10 Registered User Join Date: Feb 2013 Location: Novato ca Posts: 2	Re: 1968 K2500 power steering box mounting Thanks for the reply first c-10 I didn't receive instructions with the plate.I was able to use threads like your and others I was able to get it figured out. Thanks again for your help.

03-13-2017, 04:17 PM	#4
First c10 Senior Member Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: 1968 K2500 power steering box mounting good to hear! __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.