Door stop rubber bumpers issue?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

late68 · 04-13-2012, 12:53 AM

Anyone used the rubber door stops from lmc? Seems that these are oversized for the holes that are on the body where they are soposed to go???? What should I do... Drill the hole bigger?

koda360 · 04-13-2012, 08:01 AM

Try lots of dish soap and a rubber mallet...

**Classic Heartbeat** · 04-13-2012, 08:08 AM

I do not use or sell the reproduction rubber door bumpers and I certainly wouldn't enlarge the holes in one of my trucks for them. They are too hard and tend to make it harder to close your doors. I use and sell only Genuine GM. They are softer and install easier. WES

late68 · 04-13-2012, 08:28 AM

So what is your price for a full set, both sides?

Lee H · 04-13-2012, 10:08 AM

Agree with Wes, don't drill. I've tried bumpers from the truck shop and lmc, fit is bad with both. I have a set from Brothers but have not tried them. I'm looking for an NOS set.
Posted via Mobile Device

JRANGER · 04-13-2012, 10:42 AM

Yea, I need some bumpers too

crzo68 · 03-25-2013, 01:04 PM

OK...I had gotten these rubber bumpers from LMC a few years back... for the life of me i couldn't get them into the holes...so i gave up but today i came across this post and see im not the only one... so i did use the DAWN dish soap,pliers and a flathead screwdriver and tucked and twisted and a little shoving...it worked no damage to truck or rubber bumper
took about 10 minutes
Tho im still gonna go NOS or GM only because it was still a pain in the ass

Tx Firefighter · 03-25-2013, 01:20 PM

New GM bumpers are soft like a pencil eraser. Aftermarket Chinese ones are way more firm. As cheap as GM ones are, no contest.
Posted via Mobile Device

04-13-2012, 12:53 AM	#1
late68 Registered User Join Date: Mar 2011 Location: Spring, Tx Posts: 365	Door stop rubber bumpers issue?? Anyone used the rubber door stops from lmc? Seems that these are oversized for the holes that are on the body where they are soposed to go???? What should I do... Drill the hole bigger? __________________ 1968 C10 SWB Dropped 5 in tha back 3 in tha front My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=470902

04-13-2012, 08:01 AM	#2
koda360 Registered User Join Date: Nov 2011 Location: White Cottage, Oh. Posts: 99	Re: Door stop rubber bumpers issue?? Try lots of dish soap and a rubber mallet... __________________ 1960 C-10 2000 Dakota R/T 1966 Fury I 2dr post 1984 Big Bronco 2002 Durango SLT (Bride's Ride)

04-13-2012, 08:08 AM	#3
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Re: Door stop rubber bumpers issue?? I do not use or sell the reproduction rubber door bumpers and I certainly wouldn't enlarge the holes in one of my trucks for them. They are too hard and tend to make it harder to close your doors. I use and sell only Genuine GM. They are softer and install easier. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

04-13-2012, 08:28 AM	#4
late68 Registered User Join Date: Mar 2011 Location: Spring, Tx Posts: 365	Re: Door stop rubber bumpers issue?? So what is your price for a full set, both sides? __________________ 1968 C10 SWB Dropped 5 in tha back 3 in tha front My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=470902

04-13-2012, 10:08 AM	#5
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,139	Re: Door stop rubber bumpers issue?? Agree with Wes, don't drill. I've tried bumpers from the truck shop and lmc, fit is bad with both. I have a set from Brothers but have not tried them. I'm looking for an NOS set. Posted via Mobile Device __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

04-13-2012, 10:42 AM	#6
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: Door stop rubber bumpers issue?? Yea, I need some bumpers too __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

03-25-2013, 01:04 PM	#7
crzo68 Registered User Join Date: Aug 2012 Location: Fernley, Nv Posts: 34	Re: Door stop rubber bumpers issue?? OK...I had gotten these rubber bumpers from LMC a few years back... for the life of me i couldn't get them into the holes...so i gave up but today i came across this post and see im not the only one... so i did use the DAWN dish soap,pliers and a flathead screwdriver and tucked and twisted and a little shoving...it worked no damage to truck or rubber bumper took about 10 minutes Tho im still gonna go NOS or GM only because it was still a pain in the ass Last edited by crzo68; 03-25-2013 at 01:06 PM. Reason: forgot to add something...

03-25-2013, 01:20 PM	#8
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Door stop rubber bumpers issue?? New GM bumpers are soft like a pencil eraser. Aftermarket Chinese ones are way more firm. As cheap as GM ones are, no contest. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.