show me your 73-87 lowered/bagged c10's

[made2drag]

pat386, did you c-notch it to get the rear that low? nice truck

[pat386]

Originally Posted by made2drag

pat386, did you c-notch it to get the rear that low? nice truck

Thanks!

It has a McGaughy's rear flip and notch. rear hangers are moved up, a leaf removed.

front has spindles and chopped coils. need to get the back down a little bit more.

[Malo83]

My 83


Uploaded with ImageShack.us

[made2drag]

Originally Posted by Malo83

My 83


Uploaded with ImageShack.us

man that thing sits just right

[77chevyinline6]

what size drop is that man? thing sits perfect

[Project77]

Originally Posted by Malo83

My 83


Uploaded with ImageShack.us

how low is that thing what parts did you use???

[franky69c10]

Originally Posted by Project77

how low is that thing what parts did you use???

if i remember right he told me he just had a flip kit in the rear and cut coils in the frnt no drop spindles
Posted via Mobile Device

[made2drag]

Originally Posted by pat386

Thanks!

It has a McGaughy's rear flip and notch. rear hangers are moved up, a leaf removed.

front has spindles and chopped coils. need to get the back down a little bit more.

i guess lowering shackles are next, maybe a 2 inch block....if you have clearance. i wondered about a flip, shackles and hangers and 4 inch blocks with a healthy step notch.....ride should be good and i could have bags to lift it 2 or 3 inches when driving?

[87Lowrider]

Here's mine,









Static for now.. bags purchased but not installed. Lowering spindles and 1 loop from the coils and a flip in the rear. Thinking about tubbing the rear too.

[Nforcer]

What are your wheel specs if you don't mind me asking? Diameter, width, offset, backspacing. I just lowered my 85 c10 and the Boss 338's fit like crap.