Hot floorboard-how to fix it? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Melnickta · 10-07-2018, 09:10 AM

Been driving my truck the last few weeks. Noticed the floorboards gets really hot. While that may be appreciated in the 2 months we have winter here in SC, the other 10 months makes it uncomfortable. Should I put down the heat deflection carpet? I’m concerned that even if I install ac, I’m still going to have hot feet.

Truck is staying rock steady at 180 on the temp gauge, so it’s not overheating. The 350 motor does seem to be mounted very deep towards the cab.

**mongocanfly** · 10-07-2018, 09:16 AM

Do you have anything in the floor?...carpet or rubber mat?...you will need to put something under it if you dont have anything...there's a endless choice of options for heat...

Melnickta · 10-07-2018, 02:26 PM

I have carpet and some jute padding. I think the heater is circulating hot water. Can I clamp it off with no ill effect?

**Advanced Design** · 10-07-2018, 03:32 PM

Here are two options. There are many similar products in the market.

http://m.lizardskin.com

http://www.dynamat.com

Your heater should have a shut off valve to stop the hot water circulating through the heater core.

MiraclePieCo · 10-07-2018, 04:51 PM

A quick and easy solution is header wrap - it's inexpensive and effective. Just wrap your pipes where they pass under the floor.

If you want to go all-out I can highly recommend ceramic exhaust coating as a heat barrier.

mr48chev · 10-07-2018, 04:54 PM

If the heater shut off valve has been removed or bypassed for some reason (like leaking a simple and rather inexpensive fix is a Bronco F150 heater valve. Ebay item for the Ford part number and to serve as an example. https://www.ebay.com/itm/FORD-E-F-SE...53.m1438.l2649

Black_Sheep · 10-07-2018, 05:25 PM

Quote:

Originally Posted by MiraclePieCo

A quick and easy solution is header wrap - it's inexpensive and effective. Just wrap your pipes where they pass under the floor.

If you want to go all-out I can highly recommend ceramic exhaust coating as a heat barrier.

I wrapped the entire H pipe from the manifold flange to the mufflers. With current temps in the 40's it's hard to say whether or not wrap is effective.

Warrens69GMC · 10-07-2018, 05:28 PM

Check your timing. You might not have enough timing and losing performance. This can cause your headers to run hotter and transfer heat to the floorboard.

Russell Ashley · 10-07-2018, 05:52 PM

Quote:

Originally Posted by mr48chev

If the heater shut off valve has been removed or bypassed for some reason (like leaking a simple and rather inexpensive fix is a Bronco F150 heater valve. Ebay item for the Ford part number and to serve as an example. https://www.ebay.com/itm/FORD-E-F-SE...53.m1438.l2649

That Ford valve looks exactly like the valve that came with my Vintage Air setup.

mr48chev · 10-07-2018, 06:00 PM

Late timing will cause excess exhaust heat.

You might think about fabbing some heat shields that stand off the bottom side of the floor over the exhaust in that area to see if it works.

Melnickta · 10-07-2018, 08:08 PM

Quote:

Originally Posted by mr48chev

If the heater shut off valve has been removed or bypassed for some reason (like leaking a simple and rather inexpensive fix is a Bronco F150 heater valve. Ebay item for the Ford part number and to serve as an example. https://www.ebay.com/itm/FORD-E-F-SE...53.m1438.l2649

Where would I find this shut off valve? I think this is my issue.

1project2many · 10-07-2018, 08:31 PM

Quote:

Where would I find this shut off valve? I think this is my issue.

The shut off valve will be in one of the heater hoses or inside the heater itself.

Quote:

You might think about fabbing some heat shields that stand off the bottom side of the floor over the exhaust in that area to see if it works.

If you have hot floorboards even after restricting coolant through the heater the problem might be heat from exhaust and engine compartment. Using insulation under the floormat helps a bunch but the steel floor will conduct heat throughout the cab during warmer months. I'd also recommend adding a heat shield.

dsraven · 10-07-2018, 09:05 PM

heat shields, leave a standoff gap between the shield and the floor's underside. light guage aluminum is all you need, so easy to work with. if you don't wanna do the whole underside then at least do the area above the exhaust. look under any vehicle that is factory on the underside and you will see the exhust has heat shields above it the length of the cabin area.you may even be able to use something factory from a wreck if you find something the right size etc.

10-07-2018, 09:10 AM	#1
Melnickta Registered User Join Date: May 2012 Location: Bluffton, SC Posts: 59	Hot floorboard-how to fix it? Been driving my truck the last few weeks. Noticed the floorboards gets really hot. While that may be appreciated in the 2 months we have winter here in SC, the other 10 months makes it uncomfortable. Should I put down the heat deflection carpet? I’m concerned that even if I install ac, I’m still going to have hot feet. Truck is staying rock steady at 180 on the temp gauge, so it’s not overheating. The 350 motor does seem to be mounted very deep towards the cab. Attached Images

10-07-2018, 09:16 AM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,583	Re: Hot floorboard-how to fix it? Do you have anything in the floor?...carpet or rubber mat?...you will need to put something under it if you dont have anything...there's a endless choice of options for heat... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

10-07-2018, 02:26 PM	#3
Melnickta Registered User Join Date: May 2012 Location: Bluffton, SC Posts: 59	Re: Hot floorboard-how to fix it? I have carpet and some jute padding. I think the heater is circulating hot water. Can I clamp it off with no ill effect?

10-07-2018, 03:32 PM	#4
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: Hot floorboard-how to fix it? Here are two options. There are many similar products in the market. http://m.lizardskin.com http://www.dynamat.com Your heater should have a shut off valve to stop the hot water circulating through the heater core. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

10-07-2018, 04:51 PM	#5
MiraclePieCo Registered User Join Date: Sep 2014 Location: USA Posts: 2,249	Re: Hot floorboard-how to fix it? A quick and easy solution is header wrap - it's inexpensive and effective. Just wrap your pipes where they pass under the floor. If you want to go all-out I can highly recommend ceramic exhaust coating as a heat barrier. Attached Images __________________ 1951 Chevy Panel Truck

10-07-2018, 04:54 PM	#6
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,281	Re: Hot floorboard-how to fix it? If the heater shut off valve has been removed or bypassed for some reason (like leaking a simple and rather inexpensive fix is a Bronco F150 heater valve. Ebay item for the Ford part number and to serve as an example. https://www.ebay.com/itm/FORD-E-F-SE...53.m1438.l2649 __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

10-07-2018, 05:28 PM	#8
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,613	Re: Hot floorboard-how to fix it? Check your timing. You might not have enough timing and losing performance. This can cause your headers to run hotter and transfer heat to the floorboard.

10-07-2018, 06:00 PM	#10
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,281	Re: Hot floorboard-how to fix it? Late timing will cause excess exhaust heat. You might think about fabbing some heat shields that stand off the bottom side of the floor over the exhaust in that area to see if it works. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

10-07-2018, 09:05 PM	#13
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 7,825	Re: Hot floorboard-how to fix it? heat shields, leave a standoff gap between the shield and the floor's underside. light guage aluminum is all you need, so easy to work with. if you don't wanna do the whole underside then at least do the area above the exhaust. look under any vehicle that is factory on the underside and you will see the exhust has heat shields above it the length of the cabin area.you may even be able to use something factory from a wreck if you find something the right size etc.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.