The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-09-2019, 09:32 PM   #1
JT's 53
Registered User
 
Join Date: Sep 2017
Location: Hudson, CO
Posts: 1
Favorite rearend for a 53?

Guys, what’s your favorite rearend to use in a 53? Probably hooked up to a 350 with an automatic. Thanks
JT's 53 is offline   Reply With Quote
Old 04-09-2019, 09:39 PM   #2
mongocanfly
Senior Member
 
Join Date: May 2015
Location: Alabama
Posts: 8,121
Re: Favorite rearend for a 53?

welcome...
it mostly depends on what your plan is...tires/wheels play into it as well as bolt pattern and brakes
i have a 9in disc brake for mine...some use 12bolt or 10bolt,,other use s10 or zr2 and then others use 8.8 explorer...
__________________
Mongo...aka Greg

1981 c30 lq9 nv4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
1955.1 ls3 tr6060...(under construction)(on hold)
2013 gmc z71. (daily driver)
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
mongocanfly is offline   Reply With Quote
Old 04-09-2019, 10:09 PM   #3
MiraclePieCo
Registered User
 
MiraclePieCo's Avatar
 
Join Date: Sep 2014
Location: OR
Posts: 1,048
Re: Favorite rearend for a 53?

Are we talking from a width standpoint, installation standpoint, or a performance standpoint?

I had a 4x4 S10 Blazer rear in my '50 PU. It required mini-tubs in the box to run wide tires. Now I have a GM 12-bolt from a '67 Chevelle in my '51. The width is perfect without the need to tub the bed unless you're running real fatties. It's a 2.73 ratio behind a TH350. I live in a mountainous area; the rear was too high geared for my previous 700R4 trans. It constantly hunted gears pulling hills.

I find 8-9" Ford rears are much easier to work on. Easier to pull axles, install seals, etc. because it can all be done from outside without going under the car or breaking open the case. In this case however I wanted my Chevy to be all Chevy.
__________________
1951 Chevy Panel Truck

Last edited by MiraclePieCo; 04-09-2019 at 10:20 PM.
MiraclePieCo is offline   Reply With Quote
Old 04-09-2019, 11:36 PM   #4
mick53
Registered User
 
Join Date: Oct 2018
Location: Warsaw IN
Posts: 123
Re: Favorite rearend for a 53?

For performance I have a Frankland Quick change with Gleason dif. 12.88 Wilwood disk brakes. 4:11 ring has about 128 gear ratios from about 1:85 to about 8:65. Just a matter how far you go. I had a 12 bolt 6 lug in it and it was a nice fit. I'm running a Tremec TKO 600.

Last edited by mick53; 04-09-2019 at 11:37 PM. Reason: info
mick53 is offline   Reply With Quote
Old 04-17-2019, 09:34 PM   #5
popstand
Registered User
 
Join Date: Oct 2010
Location: southeast michigan
Posts: 24
Re: Favorite rearend for a 53?

Bought my ’53 in Alabama 30 years ago, had a 327, Saginaw 4-speed, and a ’68 Impala 3.08 8.2 10-bolt, drum brakes non locker axle. Leaf spring pads welded onto housing tubes. Perfect fit in truck with GM 15 inch rally wheels, 235-15 BFG TA's. Truck is now all redone but still has same axle - but will be replacing soon with an ’81 Firebird Trans Am WS6 axle with disc brakes. New axle is ‘corporate’ 8.5 10-bolt posi. This corporate 8.5 is almost as strong as the older 12-bolts and there’s lots of them around. But actually, the 8.2 is just fine in a pickup with a 350.
popstand is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:11 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com