ATTENTION: In regards to James Blanton aka "tex parts 67-72" and Partner. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

***Josh*** · 01-04-2004, 03:13 AM

I have banned James Blanton aka "tex parts 67-72" after many unsavory dealings, and violations of board rules. He was selling as a dealer without paying proper advertising fees etc. He is claiming to switch ISPs and come back, and also get other board members to post parts for him. Take this warning, ANY member caught selling parts for him, will be banned permanently, immediately. If any of you see him, registered, or posting selling parts on this board, please let me know ASAP.

68 Suburban · 01-04-2004, 03:36 AM

Everything I have heard about this guy is bad news.

teeitup · 01-04-2004, 07:37 AM

Thanks Josh!!!!!!!!

We do not need misrepresentation on this board, Your doing great! Randy

JimKshortstep4x4 · 01-04-2004, 09:01 AM

My thanks too, Josh. This is the best board on the net and we are glad to see you keep it that way!

Jim

hughnews1 · 01-04-2004, 05:33 PM

just like Primer67 took my $200 .. never heard from him again ..

LT 72 Jimmy · 01-04-2004, 07:59 PM

That dude ripped me off on Ebay. I was foolish enough to send feedback before closely looking at the parts. I only lost $30 though. Lesson learned.

LT

**BAD4X4** · 01-04-2004, 11:49 PM

Thanx Josh, this guy ripped me off on e-bay too. This guy is a class act, snake in the grass. You are doing a great job Josh. Thanx again Dana

sakohntr · 01-05-2004, 07:31 PM

This is one of his responses to negative feedback on ebay -
Response by truckparts67_72 - CUSTOMER RECIEVED WHEEL WELL IN LESS THAN 1 MONTH .THANKS FOR ALL YOUR SUPPORT
That about sums it up!

junkyardjohn · 01-05-2004, 09:57 PM

THANKS JOSH ..... ONE LESS RIPOFF ARTIST WE HAVE TO WORRY ABOUT.

JOHN

Bowtiefreak · 01-05-2004, 11:19 PM

I have been keeping my mouth shut for months now on this issue but due to the recent sticky note, I want to share something. Do a search on sliciknsmooth72 and smooth72 and YOU WILL SEE that this person seems to be using the same phone number. I called smooth72 awhile back about some doors that he was selling and he said his name was James,but I never bought them because he would never send me pics. Then a couple months went by and I was going to buy a cab from slicknsmooth72 and quess what NO pics again, then I realized the voice sounded the same as smooth72 and so I asked what his name was, quess what, this guys name was James again. So I then did a search on the two names and found out that the phone numbers were the same. After getting a little pissed I confronted him about being smooth72 and slicknsmooth72 and asing if his name was James B. he hung up the phone. OH btw, he said he was never a board member before when I was talking to him as slicknsmooth72. You be the judge.

Just sharing some info.
Ron

Burnsman · 01-06-2004, 01:56 PM

This guy is a real character. Been there, done that. He gives these trucks a bad name. Luckily, after threatening him (I know, not real good, but he had me pissed), I managed to get most of the damage re-imbursed. Stay far, far away..............

ChevyDude · 01-06-2004, 02:11 PM

I'm a little ignorant on this one.....but is this the guy that sells all the chrome stuff on ebay where your money is sent to some place like.....Lone Oak, TX ???

*Randy70C-10* · 01-06-2004, 02:12 PM

Bowtiefreak- Slicknsmooth also posted a link to one of his ebay auctions last week, same guy.

SEVEND2 · 01-06-2004, 03:47 PM

Josh,
Thanks for the update info

68 Suburban · 01-06-2004, 06:41 PM

Quote:

Originally posted by ChevyDude
I'm a little ignorant on this one.....but is this the guy that sells all the chrome stuff on ebay where your money is sent to some place like.....Lone Oak, TX ???

Yes.

dinnut · 01-06-2004, 06:58 PM

when i was at his place i was in his office. i saw all his chrome and he said he had tons of parts waiting to goto the chrome shop. hell he could probably build a chrome truck. all the chrome looked bad.

teeitup · 01-06-2004, 07:14 PM

Dinnut, was that in Lone Oak?

PT'S 70 CST · 01-07-2004, 09:10 AM

THANKS FOR THE HEADS UP ON THIS GUY , BUT I COUGHT ONTO HIM A LONG TIME AGO. I SELL ALOT OF PARTS ON EBAY AND I WANT YALL TO KNOW MY EBAY HANDLE IS (DAWGFAN227) NOT THAT I AM TRYING TO HIDE ANYTHING AT ALL FROM YALL, BUT I JUST JOINED THE BOARD ABOUT THREE MONTHS AGO AND WANTED MY NAME TO REPRESENT MY TRUCK. I TRY TO BE VERY HONEST ABOUT EVERYTHING I SELL AND IF SOME ONE IS NOT HAPPY I GLADLY WILL GIVE A REFUND. I HAVE BEEN LUCKY SO FAR OR JUST HONEST BECAUSE I HAVE 270 TRANSACTIONS AND 100% POS. FEED BACK. BUT GETTING BACK TO TRUCK PARTS I HAVE PONDERED BUYING FROM HIM ABOUT A YEAR AGO AND LOOKED AT HIS FEEDBACK AND IT IS VERY SAID TO SAY THE LEAST AND FROM TIME TO TIME I WILL LOOK AT SOME OF HIS STUFF JUST TO SEE WHO HE IS SHAFTING.
PT'S 70 CST AKA EBAY DAWGFAN227
I AM GLAD THAT I HAVE FOUND THIS SITE IT HAS BEEN VERY HELPFUL TO ME
AND IF I CAN HELP ANYONE OF YOU MEMBERS IN ANY WAY DON'T HESITAE TO ASK ME. AND THANKS AGAIN FOR ALL OF YALLS VALUBLE INFO

PAUL TIMMERMAN

spencra · 01-07-2004, 11:44 AM

I was reading another link to this page and somebody stated that "they were afraid to buy anything coming from Texas for fear that it could be this guy". After reading all the nightmare statements about this guy, and I have seen him on e-bay and steared clear because of his negative feedback, I also am weary of purchasing from a Texas vendor. I definately pay attention as to what area the person is selling parts out of.
Anybody can change their handle name if they get a bad enough reputation. So bang up job there Slicknsmooth or whatever your name is at this moment for ruining it for all those honest sellers from Texas.
Some people just have no shame about ripping people off. From what I've read this guy also has the brass ones to get irate with customers that call him to question him about the crap that they have received.
Lying to customers about the product you are selling and taking their money is the same as stealing. So get a conscience and change your ways but it's probably too late for that as it appears your reputation, if you ever had one, is badly tarnished.

*Shane* · 01-07-2004, 05:19 PM

only two words for this kind of person: SLIME BALL!

Pilgrim · 01-07-2004, 05:39 PM

Glad to see the board working as it should. Thanks, Josh.

714x4lover · 01-07-2004, 09:57 PM

Isure enjoy looking at all the stuff you boys are putting on the site,ive been looking for some time .i havnt had any dealing with this guy ,but have had good ones with every one else, THANKS FOR THE HEADS UP 714X4LOVER

dinnut · 01-08-2004, 06:32 PM

yeah what about us honest texas guys?

people just ignore this guy and a certain chrome shop in lone oak lol

Billy G · 01-09-2004, 08:46 PM

Hopefully.....this puke DOESNT represent Texas!!! 99.9%
of us are OK.....

teeitup · 01-09-2004, 09:22 PM

Everyone else I've dealt with in Texas has been great except him.!

01-04-2004, 03:13 AM	#1
*Josh* He's got mean nasty FANGS! Join Date: Dec 1999 Location: Rockwell, NC Posts: 6,504	ATTENTION: In regards to James Blanton aka "tex parts 67-72" and Partner. I have banned James Blanton aka "tex parts 67-72" after many unsavory dealings, and violations of board rules. He was selling as a dealer without paying proper advertising fees etc. He is claiming to switch ISPs and come back, and also get other board members to post parts for him. Take this warning, ANY member caught selling parts for him, will be banned permanently, immediately. If any of you see him, registered, or posting selling parts on this board, please let me know ASAP. __________________ 2004 K2500 Burb 1999 C3500 1985 Cutlass Supreme 1969 C-10 1967 C-10 Panel josh@67-72chevytrucks.com

01-04-2004, 07:37 AM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Thanks Josh!!!!!!!! We do not need misrepresentation on this board, Your doing great! Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-04-2004, 07:59 PM	#6
LT 72 Jimmy Registered User Join Date: Sep 2002 Location: Arkansas Posts: 252	rip off That dude ripped me off on Ebay. I was foolish enough to send feedback before closely looking at the parts. I only lost $30 though. Lesson learned. LT

01-04-2004, 11:49 PM	#7
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Thanx Josh, this guy ripped me off on e-bay too. This guy is a class act, snake in the grass. You are doing a great job Josh. Thanx again Dana __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

01-05-2004, 07:31 PM	#8
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	sums This is one of his responses to negative feedback on ebay - Response by truckparts67_72 - CUSTOMER RECIEVED WHEEL WELL IN LESS THAN 1 MONTH .THANKS FOR ALL YOUR SUPPORT That about sums it up! __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

01-04-2004, 03:36 AM	#2
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	Everything I have heard about this guy is bad news.

01-04-2004, 09:01 AM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	My thanks too, Josh. This is the best board on the net and we are glad to see you keep it that way! Jim

01-04-2004, 05:33 PM	#5
hughnews1 Registered User Join Date: Apr 2002 Location: Hudson FL gulf coast Posts: 624	just like Primer67 took my $200 .. never heard from him again ..

01-05-2004, 09:57 PM	#9
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	THANKS JOSH ..... ONE LESS RIPOFF ARTIST WE HAVE TO WORRY ABOUT. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

01-05-2004, 11:19 PM	#10
Bowtiefreak Registered User Join Date: Jul 2003 Location: LeRoy, Mich. Posts: 854	I have been keeping my mouth shut for months now on this issue but due to the recent sticky note, I want to share something. Do a search on sliciknsmooth72 and smooth72 and YOU WILL SEE that this person seems to be using the same phone number. I called smooth72 awhile back about some doors that he was selling and he said his name was James,but I never bought them because he would never send me pics. Then a couple months went by and I was going to buy a cab from slicknsmooth72 and quess what NO pics again, then I realized the voice sounded the same as smooth72 and so I asked what his name was, quess what, this guys name was James again. So I then did a search on the two names and found out that the phone numbers were the same. After getting a little pissed I confronted him about being smooth72 and slicknsmooth72 and asing if his name was James B. he hung up the phone. OH btw, he said he was never a board member before when I was talking to him as slicknsmooth72. You be the judge. Just sharing some info. Ron __________________ 1968 Chevy C10 Short Fleetside/Wood floor ECE 4-6 Drop / 406 Small Block 1971 Chevelle 427 Big Block

01-06-2004, 01:56 PM	#11
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	tex parts This guy is a real character. Been there, done that. He gives these trucks a bad name. Luckily, after threatening him (I know, not real good, but he had me pissed), I managed to get most of the damage re-imbursed. Stay far, far away.............. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

01-06-2004, 02:11 PM	#12
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	I'm a little ignorant on this one.....but is this the guy that sells all the chrome stuff on ebay where your money is sent to some place like.....Lone Oak, TX ??? __________________ Alex 1971 Lil' Red 350 SBC 700R4

01-06-2004, 02:12 PM	#13
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Bowtiefreak- Slicknsmooth also posted a link to one of his ebay auctions last week, same guy.

01-06-2004, 03:47 PM	#14
SEVEND2 Registered User Join Date: Aug 2001 Location: Menifee, Calif, USA Posts: 2,143	Josh, Thanks for the update info __________________ With a 1972 Chevy Custom-10 Long bed w/350cid th350, (under-construction). Progress on truck so far (follow link): http://67-72chevytrucks.com/vboard/s...ad.php?t=51051 and stage 2 http://67-72chevytrucks.com/vboard/s...ad.php?t=58132 ~ "Why couldn't you have just put the bunny back in the box?" ~

01-06-2004, 06:58 PM	#16
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	when i was at his place i was in his office. i saw all his chrome and he said he had tons of parts waiting to goto the chrome shop. hell he could probably build a chrome truck. all the chrome looked bad. __________________ 70 longbed 496/th400/Ford 9"



Register or Log In To remove these advertisements.

01-06-2004, 07:14 PM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Dinnut, was that in Lone Oak? __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-07-2004, 09:10 AM	#18
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	THANKS FOR THE HEADS UP ON THIS GUY , BUT I COUGHT ONTO HIM A LONG TIME AGO. I SELL ALOT OF PARTS ON EBAY AND I WANT YALL TO KNOW MY EBAY HANDLE IS (DAWGFAN227) NOT THAT I AM TRYING TO HIDE ANYTHING AT ALL FROM YALL, BUT I JUST JOINED THE BOARD ABOUT THREE MONTHS AGO AND WANTED MY NAME TO REPRESENT MY TRUCK. I TRY TO BE VERY HONEST ABOUT EVERYTHING I SELL AND IF SOME ONE IS NOT HAPPY I GLADLY WILL GIVE A REFUND. I HAVE BEEN LUCKY SO FAR OR JUST HONEST BECAUSE I HAVE 270 TRANSACTIONS AND 100% POS. FEED BACK. BUT GETTING BACK TO TRUCK PARTS I HAVE PONDERED BUYING FROM HIM ABOUT A YEAR AGO AND LOOKED AT HIS FEEDBACK AND IT IS VERY SAID TO SAY THE LEAST AND FROM TIME TO TIME I WILL LOOK AT SOME OF HIS STUFF JUST TO SEE WHO HE IS SHAFTING. PT'S 70 CST AKA EBAY DAWGFAN227 I AM GLAD THAT I HAVE FOUND THIS SITE IT HAS BEEN VERY HELPFUL TO ME AND IF I CAN HELP ANYONE OF YOU MEMBERS IN ANY WAY DON'T HESITAE TO ASK ME. AND THANKS AGAIN FOR ALL OF YALLS VALUBLE INFO PAUL TIMMERMAN __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

01-07-2004, 11:44 AM	#19
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	I was reading another link to this page and somebody stated that "they were afraid to buy anything coming from Texas for fear that it could be this guy". After reading all the nightmare statements about this guy, and I have seen him on e-bay and steared clear because of his negative feedback, I also am weary of purchasing from a Texas vendor. I definately pay attention as to what area the person is selling parts out of. Anybody can change their handle name if they get a bad enough reputation. So bang up job there Slicknsmooth or whatever your name is at this moment for ruining it for all those honest sellers from Texas. Some people just have no shame about ripping people off. From what I've read this guy also has the brass ones to get irate with customers that call him to question him about the crap that they have received. Lying to customers about the product you are selling and taking their money is the same as stealing. So get a conscience and change your ways but it's probably too late for that as it appears your reputation, if you ever had one, is badly tarnished. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

01-07-2004, 05:19 PM	#20
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	only two words for this kind of person: SLIME BALL!

01-07-2004, 05:39 PM	#21
Pilgrim Registered User Join Date: Mar 2003 Location: Crescent City, FL Posts: 492	Glad to see the board working as it should. Thanks, Josh. __________________ Bob 68 C20 Camper Special

01-07-2004, 09:57 PM	#22
714x4lover Registered User Join Date: Jun 2002 Location: Show Low, Arizona Posts: 211	thanks Isure enjoy looking at all the stuff you boys are putting on the site,ive been looking for some time .i havnt had any dealing with this guy ,but have had good ones with every one else, THANKS FOR THE HEADS UP 714X4LOVER

01-08-2004, 06:32 PM	#23
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	yeah what about us honest texas guys? people just ignore this guy and a certain chrome shop in lone oak lol __________________ 70 longbed 496/th400/Ford 9"

01-09-2004, 08:46 PM	#24
Billy G Registered User Join Date: May 2003 Location: Dayton, Tx (in Old River) Posts: 286	Hopefully.....this puke DOESNT represent Texas!!! 99.9% of us are OK..... __________________ My FAMOUS LAST WORDS...."Ima Gonna!!" - 1970 GMC 1500 swb/step 250 I-6 3 spd - "The GEM" - 1976 Chev Scotsdale swb/step 350/350 - "The JEWEL" - 1982 Chev C-10 swb/step 250 I-6 3 spd - - 2001 Chev Silverado LT -

01-09-2004, 09:22 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Everyone else I've dealt with in Texas has been great except him.! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.