finally come - Page 18 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

awbrown · 08-07-2017, 11:01 PM

lOOKS GOOD !!!

**pimpston65** · 08-21-2017, 11:09 PM

just dialed in my mig welder

**pimpston65** · 08-21-2017, 11:10 PM

back side

Bomp · 08-21-2017, 11:31 PM

Something to be said about 100% penetration!
WooHoo Looks Good

**pimpston65** · 08-22-2017, 10:38 AM

Quote:

Originally Posted by Bomp

Something to be said about 100% penetration!
WooHoo Looks Good

thanks. i was hoping a member made a comment, cuz i havent welded much and now i have a heap of patching to do. since you approve i can rest easy bout my skills...

**pimpston65** · 08-22-2017, 10:54 AM

Quote:

Originally Posted by Bomp

Something to be said about 100% penetration!
WooHoo Looks Good

thanks. i was hoping a member made a comment, cuz i havent welded much and now i have a heap of patching to do. since you approve i can rest easy bout my skills...

wahl4m · 08-22-2017, 02:55 PM

you need to hammer & dolly the weld as you go ! got to the -metalmeet .com or allmetalshaping sites -lots of help available there -you do have to dig in the archives a bit ?? good luck !! mike

**pimpston65** · 08-22-2017, 04:16 PM

Quote:

Originally Posted by wahl4m

you need to hammer & dolly the weld as you go ! got to the -metalmeet .com or allmetalshaping sites -lots of help available there -you do have to dig in the archives a bit ?? good luck !! mike

thanks for the info. i'll check it out tonight!!! oh i forgot its on the rear quarters of the burb that im working on, they have the inner panel so no dolly action.

lower50's · 08-22-2017, 07:02 PM

Well that's a great start.

wahl4m · 08-23-2017, 06:38 AM

remember -yoiu might use some weld thru primer -inside that 1/4 -or leave a spot on the back side for access for undercoat or something in there or it will rust real quick when the outside is finished ?? there should be lots of info on the 2 metal sites i mentioned - it would also be easier if the body is on a positioner for welding ?? im about ready to start on my 59 napco carry all ,lots of the same welding spots to be done !!

**pimpston65** · 08-23-2017, 07:25 AM

Quote:

Originally Posted by wahl4m

remember -yoiu might use some weld thru primer -inside that 1/4 -or leave a spot on the back side for access for undercoat or something in there or it will rust real quick when the outside is finished ?? there should be lots of info on the 2 metal sites i mentioned - it would also be easier if the body is on a positioner for welding ?? im about ready to start on my 59 napco carry all ,lots of the same welding spots to be done !!

i have a large area to patch. i will need to peel parts off to get access to internal parts such as the clam shell recieiver that i will be grafting a new rustfree piece back on. so i can get to the back side then

LT1 Burb · 08-23-2017, 09:29 AM

Looks good, nice job.

**Baketown Scotty** · 08-24-2017, 05:07 PM

I guess I need some more adjustments to mine. Type of welder, settings?

**pimpston65** · 08-24-2017, 05:27 PM

Quote:

Originally Posted by Baketown Scotty

I guess I need some more adjustments to mine. Type of welder, settings?

craftsman 120v set to min. temp and 3ish wire speed. I think im running non flux core wire, but I will check. no shielding gas... plus whats cool, when i flip to max temp and same wire speed i can weld 1/4" plate with same results!!!

lower50's · 08-24-2017, 06:15 PM

If your gas less it will be flux core wire.

**pimpston65** · 08-24-2017, 06:56 PM

Quote:

Originally Posted by lower50's

If your gas less it will be flux core wire.

should be, but i think im running non flux core. i will double ck unless non flux core wont run through my machine.

**pimpston65** · 08-25-2017, 05:47 AM

Quote:

Originally Posted by pimpston65

should be, but i think im running non flux core. i will double ck unless non flux core wont run through my machine.

guess i was incorrect, here's the wire u been running.

**Baketown Scotty** · 08-26-2017, 02:46 PM

Thanks Pimpston65. I'm using gas on Lincoln 135, setting B(from A,B,C,D) and number 3 (out of 10). Next time out I'll take it down to 2 and see. Thanks.

**pimpston65** · 09-08-2017, 12:57 PM

might be a bit a overkill, but i had the lift jig remade in steel. i also made it a tandem. now i use 2 hoists instead of one.

**pimpston65** · 09-08-2017, 12:59 PM

Quote:

Originally Posted by pimpston65

might be a bit a overkill, but i had the lift jig remade in steel. i also made it a tandem. now i use 2 hoists instead of one.

i had the center one added also with the idea of being able to flip it and use it to lift from the back pointing in, but i may cut those brackets off.

**pimpston65** · 09-15-2017, 01:05 AM

i must be lucky. found the rear cab support from desert valley auto parts. they cut it out,boxed and shipped for $250 btw the rear cab support is different then the pickups, so thats why i say i was lucky to find one not rusted away!!!

lower50's · 09-15-2017, 02:54 PM

Score!!!

**pimpston65** · 09-15-2017, 04:55 PM

Quote:

Originally Posted by lower50's

Score!!!

score is right!!! "soon" this puzzle will be complete...

Bomp · 09-16-2017, 12:29 PM

Can't turn back now. Instead of pimpstone65 we'll have to call you pimpdoc

**pimpston65** · 09-16-2017, 10:50 PM

Quote:

Originally Posted by Bomp

Can't turn back now. Instead of pimpstone65 we'll have to call you pimpdoc

shut ur face, i like it!!!

08-07-2017, 11:01 PM	#426
awbrown Registered User Join Date: Aug 2009 Location: Detroit MI Posts: 1,209	Re: finally come lOOKS GOOD !!!

08-21-2017, 11:09 PM	#427
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: finally come just dialed in my mig welder Attached Images

08-21-2017, 11:10 PM	#428
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: finally come back side Attached Images

08-21-2017, 11:31 PM	#429
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: finally come Something to be said about 100% penetration! WooHoo Looks Good

08-22-2017, 02:55 PM	#432
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 921	Re: finally come you need to hammer & dolly the weld as you go ! got to the -metalmeet .com or allmetalshaping sites -lots of help available there -you do have to dig in the archives a bit ?? good luck !! mike

08-22-2017, 07:02 PM	#434
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: finally come Well that's a great start. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

08-23-2017, 06:38 AM	#435
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 921	Re: finally come remember -yoiu might use some weld thru primer -inside that 1/4 -or leave a spot on the back side for access for undercoat or something in there or it will rust real quick when the outside is finished ?? there should be lots of info on the 2 metal sites i mentioned - it would also be easier if the body is on a positioner for welding ?? im about ready to start on my 59 napco carry all ,lots of the same welding spots to be done !!

08-23-2017, 09:29 AM	#437
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: finally come Looks good, nice job.

08-24-2017, 05:07 PM	#438
Baketown Scotty Junior Member Join Date: Oct 2005 Location: Bakersfield, CA Posts: 303	Re: finally come I guess I need some more adjustments to mine. Type of welder, settings? __________________ 1964 Chevy Suburban 4x4 1966 GMC Suburban 4x4

08-24-2017, 06:15 PM	#440
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: finally come If your gas less it will be flux core wire. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

08-26-2017, 02:46 PM	#443
Baketown Scotty Junior Member Join Date: Oct 2005 Location: Bakersfield, CA Posts: 303	Re: finally come Thanks Pimpston65. I'm using gas on Lincoln 135, setting B(from A,B,C,D) and number 3 (out of 10). Next time out I'll take it down to 2 and see. Thanks. __________________ 1964 Chevy Suburban 4x4 1966 GMC Suburban 4x4

09-08-2017, 12:57 PM	#444
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: finally come might be a bit a overkill, but i had the lift jig remade in steel. i also made it a tandem. now i use 2 hoists instead of one. Attached Images

09-15-2017, 01:05 AM	#446
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: finally come i must be lucky. found the rear cab support from desert valley auto parts. they cut it out,boxed and shipped for $250 btw the rear cab support is different then the pickups, so thats why i say i was lucky to find one not rusted away!!! Attached Images Last edited by pimpston65; 09-15-2017 at 04:53 PM.

09-15-2017, 02:54 PM	#447
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: finally come Score!!! __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

09-16-2017, 12:29 PM	#449
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: finally come Can't turn back now. Instead of pimpstone65 we'll have to call you pimpdoc



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.