1950 Side Glass Not going to the top when up - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Curt - TN · 02-11-2018, 12:09 AM

I a finally getting back on the 50 project and I just installed new reproduction window regulators and new side glass. The issue I am having is no matter how I adjust the regulator positioning the glass is about 1/2 inch to an inch form the top when cranked all the way up.

Any ideas on what might be causing this?

Did I mention how much I hate installing doors and glass

Thanks,

**mongocanfly** · 02-11-2018, 12:26 AM

"Did I mention how much I hate installing doors and glass"......amen brother...
can you physically push the window all the way if unhooked from the crank?....is it both sides or just one..

MiraclePieCo · 02-11-2018, 05:33 AM

There is a screw near the top of the window channel that secures the felt channel in place - is that screwed out and interfering with your glass?

If you can't find the problem, just have a longer window glass cut that will reach the top. I've done it, it works fine.

Curt - TN · 02-11-2018, 08:53 AM

There is nothing interfering with the glass going up, did it with and without the felt. Everything is new and nothing is binding, it seems like the window regulator is stopping before the glass hits the top.

A longer glass would be a good idea, the glass is new reproduction, will have to see how it might effect the chrome trim around the glass.

**mongocanfly** · 02-11-2018, 09:55 AM

did you compare new to old on your regulators?

Curt - TN · 02-11-2018, 10:26 AM

Quote:

Originally Posted by mongocanfly

did you compare new to old on your regulators?

I bought the truck as an unfinished project, it did not have glass or the original regulators

MARTINSR · 02-11-2018, 04:44 PM

I HATE reproduction parts! OMG I will do ANYTHING but use reproduction parts. There is almost no adjustment on those windows because it's not needed it's not a hard top for goodness sakes it's not rocket science! Geeez the damn thing should work without much thought. I HATE reproduction parts!

Brian

ps: did I mention I am not real fond of reproduction parts?

**Advanced Design** · 02-11-2018, 07:48 PM

Curt where have you been? Can you show a pic or video of the regulator? Probably can't really see it in the door. Maybe a tooth timing issue with the gears?

I agree with Brian on reproduction parts. Seems like there is no effort to make them correctly....just to make something that looks right and make money from it...wether it works correctly or not. Very frustrating!

mr48chev · 02-12-2018, 12:20 AM

Thinking back 45 years when I had just bought my 48 and was changing windows to replace the broken ones one arm on the regulator may have caught on something inside the door not allowing the window to go all the way up. I can't remember much more about it but remember that something was hanging up.

You do have the roller that goes in the track in the door in that track right. I fought that deal once or twice.

MARTINSR · 02-12-2018, 12:52 AM

Maybe the bolt in that holds the window frame to the channel? It's too big or something originally it was a round headed clutch head screw, maybe you put a bolt so the roller can't get past it?

Brian

02-11-2018, 12:09 AM	#1
Curt - TN Registered User Join Date: Feb 2016 Location: Brentwood, TN Posts: 138	1950 Side Glass Not going to the top when up I a finally getting back on the 50 project and I just installed new reproduction window regulators and new side glass. The issue I am having is no matter how I adjust the regulator positioning the glass is about 1/2 inch to an inch form the top when cranked all the way up. Any ideas on what might be causing this? Did I mention how much I hate installing doors and glass Thanks, __________________ Curt Brentwood TN 1950 Chevy 5 Window 3100 - Check out my Build Thread: http://67-72chevytrucks.com/vboard/showthread.php?t=724260 1957 GMC 100

02-11-2018, 12:26 AM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,581	Re: 1950 Side Glass Not going to the top when up "Did I mention how much I hate installing doors and glass"......amen brother... can you physically push the window all the way if unhooked from the crank?....is it both sides or just one.. __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

02-11-2018, 05:33 AM	#3
MiraclePieCo Registered User Join Date: Sep 2014 Location: USA Posts: 2,249	Re: 1950 Side Glass Not going to the top when up There is a screw near the top of the window channel that secures the felt channel in place - is that screwed out and interfering with your glass? If you can't find the problem, just have a longer window glass cut that will reach the top. I've done it, it works fine.

02-11-2018, 08:53 AM	#4
Curt - TN Registered User Join Date: Feb 2016 Location: Brentwood, TN Posts: 138	Re: 1950 Side Glass Not going to the top when up There is nothing interfering with the glass going up, did it with and without the felt. Everything is new and nothing is binding, it seems like the window regulator is stopping before the glass hits the top. A longer glass would be a good idea, the glass is new reproduction, will have to see how it might effect the chrome trim around the glass. __________________ Curt Brentwood TN 1950 Chevy 5 Window 3100 - Check out my Build Thread: http://67-72chevytrucks.com/vboard/showthread.php?t=724260 1957 GMC 100

02-11-2018, 09:55 AM	#5
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,581	Re: 1950 Side Glass Not going to the top when up did you compare new to old on your regulators? __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

02-11-2018, 04:44 PM	#7
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,001	Re: 1950 Side Glass Not going to the top when up I HATE reproduction parts! OMG I will do ANYTHING but use reproduction parts. There is almost no adjustment on those windows because it's not needed it's not a hard top for goodness sakes it's not rocket science! Geeez the damn thing should work without much thought. I HATE reproduction parts! Brian ps: did I mention I am not real fond of reproduction parts? __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

02-11-2018, 07:48 PM	#8
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: 1950 Side Glass Not going to the top when up Curt where have you been? Can you show a pic or video of the regulator? Probably can't really see it in the door. Maybe a tooth timing issue with the gears? I agree with Brian on reproduction parts. Seems like there is no effort to make them correctly....just to make something that looks right and make money from it...wether it works correctly or not. Very frustrating! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

02-12-2018, 12:20 AM	#9
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,268	Re: 1950 Side Glass Not going to the top when up Thinking back 45 years when I had just bought my 48 and was changing windows to replace the broken ones one arm on the regulator may have caught on something inside the door not allowing the window to go all the way up. I can't remember much more about it but remember that something was hanging up. You do have the roller that goes in the track in the door in that track right. I fought that deal once or twice. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

02-12-2018, 12:52 AM	#10
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,001	Re: 1950 Side Glass Not going to the top when up Maybe the bolt in that holds the window frame to the channel? It's too big or something originally it was a round headed clutch head screw, maybe you put a bolt so the roller can't get past it? Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.