The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Info Center > Review Board > Product Reviews

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-09-2014, 02:34 PM   #1
Holliday
Registered User
 
Holliday's Avatar
 
Join Date: Jun 2012
Location: Cache, OK
Posts: 412
Classic Parts rear bumper review

I decided to cut off the welded roll pan on my truck since im going for a different look and purchased all the brackets, hardware and bumper from classic parts. As usual everything came packaged great and installed very easily. The stressful part was cutting off the welded roll pan but it actually wasn't that bad and came out great!

The chrome on the bumper is very nice and the ends are all cut smooth. I will probably be replacing my front bumper and getting it from classic parts too.







__________________
"ALWAYS SOMETHING"
1968 Chevy C10 SWB
383 SBC, TH350
Porterbuilt, Accuair suspension

Last edited by Holliday; 09-09-2014 at 03:01 PM.
Holliday is offline   Reply With Quote
Old 09-09-2014, 03:50 PM   #2
Lee H
Registered User
 
Lee H's Avatar
 
Join Date: Jun 2010
Location: Upland Ca
Posts: 4,138
Re: Classic Parts rear bumper review

Looks great! Does the bumper box or anything inside indicate the manufacturer?
__________________
1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner.

1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components.

My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703
Lee H is offline   Reply With Quote
Old 09-09-2014, 04:31 PM   #3
Rfhimes
Registered User
 
Join Date: Jul 2014
Location: Fulton,ny
Posts: 19
Re: Classic Parts rear bumper review

Looks fantastic! Did you use the bracket cover plates. I know on the Brothers web site they sell them. It suppose to make a cleaner install but yours looks great. Was the roll pan solidly welded at the end seem or just tack welded? Thanks, Rick
Rfhimes is offline   Reply With Quote
Old 09-09-2014, 05:12 PM   #4
Holliday
Registered User
 
Holliday's Avatar
 
Join Date: Jun 2012
Location: Cache, OK
Posts: 412
Re: Classic Parts rear bumper review

Quote:
Originally Posted by Lee H View Post
Looks great! Does the bumper box or anything inside indicate the manufacturer?
Nothing that shows a manufacture, it has classic parts info on it. I would assume they get theirs from the same place brothers does since they have a 5 year chrome warranty but I have no idea. I bet they are still made in Taiwan but it looks great either way.
__________________
"ALWAYS SOMETHING"
1968 Chevy C10 SWB
383 SBC, TH350
Porterbuilt, Accuair suspension
Holliday is offline   Reply With Quote
Old 09-09-2014, 05:15 PM   #5
Holliday
Registered User
 
Holliday's Avatar
 
Join Date: Jun 2012
Location: Cache, OK
Posts: 412
Re: Classic Parts rear bumper review

Quote:
Originally Posted by Rfhimes View Post
Looks fantastic! Did you use the bracket cover plates. I know on the Brothers web site they sell them. It suppose to make a cleaner install but yours looks great. Was the roll pan solidly welded at the end seem or just tack welded? Thanks, Rick
Yea I used the bracket covers but you cant really see them unless you are right up on it looking down. The roll pan was fully welded. I started from the bottom looking inside with a sawzaw and just let her rip! lol. I still have the lip the factory lip in the panel so once I get some body work done you will never know it was on there.
__________________
"ALWAYS SOMETHING"
1968 Chevy C10 SWB
383 SBC, TH350
Porterbuilt, Accuair suspension
Holliday is offline   Reply With Quote
Old 09-09-2014, 07:08 PM   #6
Rfhimes
Registered User
 
Join Date: Jul 2014
Location: Fulton,ny
Posts: 19
Re: Classic Parts rear bumper review

Mine will be next, thanks for the inspiration , LOL
Attached Images
 
Rfhimes is offline   Reply With Quote
Old 09-09-2014, 09:25 PM   #7
Holliday
Registered User
 
Holliday's Avatar
 
Join Date: Jun 2012
Location: Cache, OK
Posts: 412
Re: Classic Parts rear bumper review

Quote:
Originally Posted by Rfhimes View Post
Mine will be next, thanks for the inspiration , LOL
I think your truck is going to look great with a bumper! Good luck with the cuts
__________________
"ALWAYS SOMETHING"
1968 Chevy C10 SWB
383 SBC, TH350
Porterbuilt, Accuair suspension
Holliday is offline   Reply With Quote
Old 09-10-2014, 08:48 AM   #8
Rfhimes
Registered User
 
Join Date: Jul 2014
Location: Fulton,ny
Posts: 19
Re: Classic Parts rear bumper review

Thanks, and by the way did you fill the notch cut out in the panel for the installation of the roll pan license plate box before installing the new bumper? Thanks, Rick
Rfhimes is offline   Reply With Quote
Old 09-10-2014, 09:19 AM   #9
In The Ten Ring
Registered User
 
Join Date: Jun 2013
Location: West Virginia
Posts: 6,421
Re: Classic Parts rear bumper review

Looks great. Bumpers are called "bumpers" for a reason. I have never understood the reasoning for going to roll pans. If that's what the owner wants, God bless them, but for me, I know people bump into things.

Thanks for the review, it's always good to know what companies can be trusted.
In The Ten Ring is offline   Reply With Quote
Old 09-10-2014, 09:30 AM   #10
russgoodman
Registered User
 
russgoodman's Avatar
 
Join Date: Oct 2012
Location: Cache, OK
Posts: 458
Re: Classic Parts rear bumper review

Glad you got it trimmed out ok. I would have been pretty nervous to cut it out as nice as your truck is. I still need the bumper and the rear brackets, so I may have to give Classic a shout.
__________________
1969 Chevy C10 SWB Fleet - Build thread > http://67-72chevytrucks.com/vboard/s...d.php?t=593554

2008 GMC Sierra Denali - 6.2L AWD - my daily
2011 Ford Flex Limited - Ecoboost AWD - wife's daily
1987 Buick Regal Turbo T - 63K miles - Strip/Street car
1965 Ford Mustang Coupe - 289, c4, 53K miles
russgoodman is offline   Reply With Quote
Old 09-10-2014, 09:36 AM   #11
Holliday
Registered User
 
Holliday's Avatar
 
Join Date: Jun 2012
Location: Cache, OK
Posts: 412
Re: Classic Parts rear bumper review

Quote:
Originally Posted by russgoodman View Post
Glad you got it trimmed out ok. I would have been pretty nervous to cut it out as nice as your truck is. I still need the bumper and the rear brackets, so I may have to give Classic a shout.
I just went for it! Lol. Don't forget coupon code (stovebolt) for your 5% off.
__________________
"ALWAYS SOMETHING"
1968 Chevy C10 SWB
383 SBC, TH350
Porterbuilt, Accuair suspension
Holliday is offline   Reply With Quote
Old 09-10-2014, 09:37 AM   #12
Holliday
Registered User
 
Holliday's Avatar
 
Join Date: Jun 2012
Location: Cache, OK
Posts: 412
Re: Classic Parts rear bumper review

Quote:
Originally Posted by Rfhimes View Post
Thanks, and by the way did you fill the notch cut out in the panel for the installation of the roll pan license plate box before installing the new bumper? Thanks, Rick
I haven't patched that price yet but it' not to bad. I have some paint and body I need to do after I get this thing all back together. If you look close at the pics you can the notch.
__________________
"ALWAYS SOMETHING"
1968 Chevy C10 SWB
383 SBC, TH350
Porterbuilt, Accuair suspension

Last edited by Holliday; 09-10-2014 at 09:42 AM.
Holliday is offline   Reply With Quote
Old 09-10-2014, 10:20 AM   #13
jhama78
Registered User
 
jhama78's Avatar
 
Join Date: Aug 2004
Location: Eastern Shore VA
Posts: 366
Re: Classic Parts rear bumper review

Looks great, this is on the short list of things to do on my 67 in the near future. If you happen to have your receipt handy could you post up the part numbers for reference so that myself as well as others can order everything necessary to do this job? Thanks in advance!
__________________
-j-rod

'06 3500 LWB CC 4wd, 8.1 Allison
jhama78 is offline   Reply With Quote
Old 09-10-2014, 12:05 PM   #14
1972BlueC20
Registered User
 
1972BlueC20's Avatar
 
Join Date: Jun 2014
Location: Houston, Texas
Posts: 722
Re: Classic Parts rear bumper review

Looks great Holliday!

I'm wanting to put this bumper on my 72 fleetside too....what all parts did you have to order as far as brackets and bolts??

I know I need the bumper and license plate bracket assembly, but im confused which brackets and bolts to get....also the license plate light you have...

I currently have an aftermarket non original type bumper with a trailer ball and I don't like the way it looks....so I might already have some brackets which may or may not work with this repro bumper....any help is appreciated.
__________________
1972 Chevrolet C20 Cheyenne Custom Camper LWB - 350 / 330 HP GM Crate - TH350 / Mild Shift Kit - Dark Blue / Medium Blue - Paint Code 559
1972BlueC20 is offline   Reply With Quote
Old 09-10-2014, 12:19 PM   #15
1972BlueC20
Registered User
 
1972BlueC20's Avatar
 
Join Date: Jun 2014
Location: Houston, Texas
Posts: 722
Re: Classic Parts rear bumper review

Ok, I answered my own question with help from classic parts.


Here is what I need to install this bumper on my 72 2WD Fleetside


Bumper Rear Chrome : Part # 65-054
License Plate Bracket Assembly : Part # 51-241
Bumper Brackets (comes in set of 4) : Part # 65-348
Bumper Bolt-Large (you will need Qty of 4) : Part # 65-105
Bumper Bolt-Small (you will need Qty of 4) : Part # 65-107
License Lamp Assembly : Part # 51-235


Hope this helps!!


-Brian
__________________
1972 Chevrolet C20 Cheyenne Custom Camper LWB - 350 / 330 HP GM Crate - TH350 / Mild Shift Kit - Dark Blue / Medium Blue - Paint Code 559
1972BlueC20 is offline   Reply With Quote
Old 09-12-2014, 09:21 PM   #16
GoaterAz
Registered User
 
GoaterAz's Avatar
 
Join Date: Sep 2012
Location: Arizona
Posts: 222
Re: Classic Parts rear bumper review

That chrome bumper really pops against the red!

Do you have any pictures of the cuts you made?

I'll be in that same boat down the road and I'm curious what the 'damage' looks like.
__________________
You remember when drinking too many beers was a bad idea?

Me neither.
GoaterAz is offline   Reply With Quote
Old 09-13-2014, 10:34 AM   #17
Rfhimes
Registered User
 
Join Date: Jul 2014
Location: Fulton,ny
Posts: 19
Re: Classic Parts rear bumper review

Hey guys, made my cuts, I broke a few sawsall blades in the process. I made ny cuts about a quarter inch into the roll panel because I didn't want to chance getting into the lip on the quarter panels. Then i carefully ground off the rest and the welds to the lip. There was a skim of bondo over the weld so I need to lightly sand and paint touch up to make it perfect. I think the new bumper will cover it anyway. I was able to fit a piece of sheet metal where the cutout was for the roll pan license plate box on the roll pan. I used my mig welder and welded it in solid and ground and sanded it smooth, then primed the whole panel. I have some paint mixed up and put in a spray can to match the truck so all I have to do now is finish and paint the areas. I'm waiting for my parts to install the rear bumper, also since I had a painted white front bumper I bought the front chrome bumper too. All in all it took me about 4 hours to make the cuts and grinding and weld in the patch. Rick
Attached Images
 
Rfhimes is offline   Reply With Quote
Old 09-18-2014, 03:58 PM   #18
Rfhimes
Registered User
 
Join Date: Jul 2014
Location: Fulton,ny
Posts: 19
Re: Classic Parts rear bumper review

Here she is...
Attached Images
 
Rfhimes is offline   Reply With Quote
Old 10-08-2014, 12:10 PM   #19
stevenbear72
Registered User
 
stevenbear72's Avatar
 
Join Date: May 2013
Location: San Antonio, Texas
Posts: 104
Re: Classic Parts rear bumper review

Thanks for all this feedback on this topic, I have a roll pan on my 68 swb that the previously owner thought would look cool as well. I dislike it very much and will be doing this change to my truck in the future.


__________________
68' Cst10 w/69 front, 5.3/4L60e swap, 12 bolt 4.11's

Project "Huckleberry"

68 GMC K1500 1/2 ton L83/6L80e
stevenbear72 is offline   Reply With Quote
Old 02-13-2016, 10:15 PM   #20
picklito
Registered User
 
Join Date: Sep 2013
Location: Vacaville CA
Posts: 490
Re: Classic Parts rear bumper review

I have an ugly rusty diamond plate bumper that I'd like to replace with one like this Classic model. Since I already have a bumper, do I still need to cut a roll pan?
picklito is offline   Reply With Quote
Old 02-13-2016, 11:28 PM   #21
72c105speed
Registered User
 
Join Date: Oct 2015
Location: Kentucky
Posts: 172
Re: Classic Parts rear bumper review

Is this the standard or premium be more?
72c105speed is offline   Reply With Quote
Old 03-28-2016, 03:09 PM   #22
Dennis_Earl
Registered User
 
Join Date: Aug 2013
Location: Nashville, TN
Posts: 17
Re: Classic Parts rear bumper review

Hey I have the diamond cut step bumper and am wanting to upgrade to this kind. Does the brackets work interchangeably?
Dennis_Earl is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:21 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com