All This Talk About Gas Tank Relocation???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dandeluxe · 02-02-2003, 09:39 PM

WITH ALL THIS TALK ABOUT ABOUT GAS TANK RELOCATION WHO HAS PUT THEIR TANK IN THE CENTER OF THE FRAME WITH A SUMMIT FUEL CELL INSTEAD OF IN THE REAR THAT SHOWS UP IN THE REAR AND LOOKS SO OBVIOUS???? IM CONSIDERING PULLING MY BED OFF AND PUTTING A FUEL CELL IN THE CENTER OF THE FRAME. AND RUNNING THE FILLER HOSE IN THE SIDE OF THE BED WITH A S-10 FUEL DOOR OR SOMETHING LIKE IT. I KNOW I WILL HAVE TO REROUTE THE EXHAUST AND OTHER MODS. BUT I THINK IT WOULD LOOK A LOT NICER THAN IN THE REAR WITH A BLAZER TANK HANGING SO LOW AND SHOWING UP ON A LOWERED TRUCK ANY IDEAS OR PIC.S IS GREATLY APPRECIATED.
DAN

minibike · 02-02-2003, 10:00 PM

I don't know how it would fit with the exhaust and mufflers...

Dandeluxe · 02-02-2003, 10:18 PM

Mini bike, ive seen it done on some members trucks. im just wonderin how and what they did to to do it. it might have been done with a custom made alum. tank thanks, DAN

minibike · 02-02-2003, 10:33 PM

Hey, I'm all for new ideas. Just keep it inside the frame rails, so it doesn't blow up like the late70's early 80's saddle tanks. I'm not thrilled about having mine just inside the rear bumper, but I would rather have it there than in the cab. Let me know what you come up with.

minibike · 02-02-2003, 10:33 PM

Hey, I'm all for new ideas. Just keep it inside the frame rails, so it doesn't blow up like the late70's early 80's saddle tanks. I'm not thrilled about having mine just inside the rear bumper, but I would rather have it there than in the cab. Let me know what you come up with.

Dandeluxe · 02-02-2003, 10:47 PM

I FOUND ONE BUT I NEED TO KNOW MORE

Dandeluxe · 02-02-2003, 11:03 PM

i was looking at the photos the wrong way i dont think there is a way to put a fuel cell in another part of the frame but i did like this one though

RACING29 · 02-02-2003, 11:13 PM

I mounted mine in the bed.

02-02-2003, 09:39 PM	#1
Dandeluxe Senior Member Join Date: Nov 2001 Location: st.louis mo. Posts: 717	All This Talk About Gas Tank Relocation???? WITH ALL THIS TALK ABOUT ABOUT GAS TANK RELOCATION WHO HAS PUT THEIR TANK IN THE CENTER OF THE FRAME WITH A SUMMIT FUEL CELL INSTEAD OF IN THE REAR THAT SHOWS UP IN THE REAR AND LOOKS SO OBVIOUS???? IM CONSIDERING PULLING MY BED OFF AND PUTTING A FUEL CELL IN THE CENTER OF THE FRAME. AND RUNNING THE FILLER HOSE IN THE SIDE OF THE BED WITH A S-10 FUEL DOOR OR SOMETHING LIKE IT. I KNOW I WILL HAVE TO REROUTE THE EXHAUST AND OTHER MODS. BUT I THINK IT WOULD LOOK A LOT NICER THAN IN THE REAR WITH A BLAZER TANK HANGING SO LOW AND SHOWING UP ON A LOWERED TRUCK ANY IDEAS OR PIC.S IS GREATLY APPRECIATED. DAN __________________ 1969 cst swb 350/400 th . DANNY C . ["]FRIENDS DONT LET FRIENDS DRIVE F@RD$!! 1969 cst swb corvette hugger orange with 400 hp sbc I started out with nothing and i held on to it

02-02-2003, 10:00 PM	#2
minibike Registered User Join Date: Jun 2002 Location: Lafayette, LA Posts: 500	I don't know how it would fit with the exhaust and mufflers... __________________ 69 SWB LT1/4L60E www.classicplace.com

02-02-2003, 10:18 PM	#3
Dandeluxe Senior Member Join Date: Nov 2001 Location: st.louis mo. Posts: 717	gas tank ? Mini bike, ive seen it done on some members trucks. im just wonderin how and what they did to to do it. it might have been done with a custom made alum. tank thanks, DAN __________________ 1969 cst swb 350/400 th . DANNY C . ["]FRIENDS DONT LET FRIENDS DRIVE F@RD$!! 1969 cst swb corvette hugger orange with 400 hp sbc I started out with nothing and i held on to it

02-02-2003, 10:33 PM	#4
minibike Registered User Join Date: Jun 2002 Location: Lafayette, LA Posts: 500	Hey, I'm all for new ideas. Just keep it inside the frame rails, so it doesn't blow up like the late70's early 80's saddle tanks. I'm not thrilled about having mine just inside the rear bumper, but I would rather have it there than in the cab. Let me know what you come up with. __________________ 69 SWB LT1/4L60E www.classicplace.com

02-02-2003, 10:33 PM	#5
minibike Registered User Join Date: Jun 2002 Location: Lafayette, LA Posts: 500	Hey, I'm all for new ideas. Just keep it inside the frame rails, so it doesn't blow up like the late70's early 80's saddle tanks. I'm not thrilled about having mine just inside the rear bumper, but I would rather have it there than in the cab. Let me know what you come up with. __________________ 69 SWB LT1/4L60E www.classicplace.com

02-02-2003, 10:47 PM	#6
Dandeluxe Senior Member Join Date: Nov 2001 Location: st.louis mo. Posts: 717	FUEL CELLS I FOUND ONE BUT I NEED TO KNOW MORE __________________ 1969 cst swb 350/400 th . DANNY C . ["]FRIENDS DONT LET FRIENDS DRIVE F@RD$!! 1969 cst swb corvette hugger orange with 400 hp sbc I started out with nothing and i held on to it

02-02-2003, 11:03 PM	#7
Dandeluxe Senior Member Join Date: Nov 2001 Location: st.louis mo. Posts: 717	fuel cell ideas i was looking at the photos the wrong way i dont think there is a way to put a fuel cell in another part of the frame but i did like this one though __________________ 1969 cst swb 350/400 th . DANNY C . ["]FRIENDS DONT LET FRIENDS DRIVE F@RD$!! 1969 cst swb corvette hugger orange with 400 hp sbc I started out with nothing and i held on to it

02-02-2003, 11:13 PM	#8
RACING29 Registered User Join Date: Jul 2002 Location: Tennessee, Morristown Posts: 355	I mounted mine in the bed. __________________ 1967 Chevy truck, R1 racing seats, 4 point racing harness, 4/6 drop, primered blue, soon to be shaved, 350- 060. over, flat top pistons, Eagle rods, Edelbrock Aluminum heads, 1.5 Scorpion roller rockers, Lunati 515" cam, mallory ignition, Holley 750 double pumper carb, Built 350 turbo trans, 2500-2800 boss hog stall, 20 gallon aluminum fuel cell!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.