Looking for pics of rear disc brake Line conversion (INLINE TUBE / POL) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HotRod C/10 · 07-04-2013, 07:29 PM

Looking for some pics of your rear disc brake line conversions. I wanna do this one time..............Thanks!

HotRod C/10 · 07-06-2013, 10:37 AM

anybody?

suspect · 07-10-2013, 10:22 PM

I don't think there really is much of a line conversion. I just removed the drums, bolted on the caliper bracket, slid the rotors on, and bolted the calipers on. As for the lines, I disconnected the 2 sections of lines that came off the T. I took them to a hose shop and had them flare a couple fittings on (Wilwood D154 calipers are metric), and reinstalled.
Hope this helps you. It's actually the easiest task to do.

http://67-72chevytrucks.com/vboard/s...=503594&page=8

wraprail · 07-13-2013, 09:16 PM

Think this is what your looking for.

You can kinda see them in this last picture although they run along the front side of the rear end housing.

It is 3/16 hard line with AN-4 fittings and hose. Normally I would use -3 hose with 3/16 line but I had a bunch of used -4 steel fittings and brake hoses lying around so it got used here.
This is my daily thrasher so thats why it aint polished and shinny. It gets drove alot of rough miles. .

Posted via Mobile Device

07-04-2013, 07:29 PM	#1
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Looking for pics of rear disc brake Line conversion (INLINE TUBE / POL) Looking for some pics of your rear disc brake line conversions. I wanna do this one time..............Thanks! __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

07-06-2013, 10:37 AM	#2
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: Looking for pics of rear disc brake Line conversion (INLINE TUBE / POL) anybody? __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

07-10-2013, 10:22 PM	#3
suspect Registered User Join Date: Jul 2011 Location: oklahoma city Posts: 692	Re: Looking for pics of rear disc brake Line conversion (INLINE TUBE / POL) I don't think there really is much of a line conversion. I just removed the drums, bolted on the caliper bracket, slid the rotors on, and bolted the calipers on. As for the lines, I disconnected the 2 sections of lines that came off the T. I took them to a hose shop and had them flare a couple fittings on (Wilwood D154 calipers are metric), and reinstalled. Hope this helps you. It's actually the easiest task to do. http://67-72chevytrucks.com/vboard/s...=503594&page=8 __________________ Daniel 68 C10 Build http://67-72chevytrucks.com/vboard/s...d.php?t=503594 Romans 10:13 Everyone who calls on the name of the Lord will be saved.

07-13-2013, 09:16 PM	#4
wraprail Registered User Join Date: Sep 2010 Location: Lake Havasu City Arizona Posts: 863	Re: Looking for pics of rear disc brake Line conversion (INLINE TUBE / POL) Think this is what your looking for. You can kinda see them in this last picture although they run along the front side of the rear end housing. It is 3/16 hard line with AN-4 fittings and hose. Normally I would use -3 hose with 3/16 line but I had a bunch of used -4 steel fittings and brake hoses lying around so it got used here. This is my daily thrasher so thats why it aint polished and shinny. It gets drove alot of rough miles. . Posted via Mobile Device __________________ Last edited by wraprail; 07-13-2013 at 09:24 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.