PIC REQUEST-Spinners (knock offs) on Rally wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RWJJR · 03-17-2008, 09:12 AM

Lets see some pics of them on 73-87s

agent orange · 03-17-2008, 09:15 AM

i don't think i'v ever seen those before

RWJJR · 03-17-2008, 09:44 AM

Quote:

Originally Posted by agent orange

i don't think i'v ever seen those before

sure you have ,similar to these, http://cgi.ebay.com/ebaymotors/Chrom...QQcmdZViewItem

except I want to see some on trucks

LOHRTBT · 03-17-2008, 10:12 AM

I want some too...Here is a set on a truck I tried to buy.

1984 swb chevy · 03-17-2008, 07:51 PM

I put a set on a 77 step side I had about 12 years ago. I found a set of spinners that fit the stock end cap of the rally wheel. I just drilled a hole in the center cap and put them on.

SCOTI · 03-17-2008, 08:03 PM

Quote:

Originally Posted by 1984 swb chevy

I put a set on a 77 step side I had about 12 years ago. I found a set of spinners that fit the stock end cap of the rally wheel. I just drilled a hole in the center cap and put them on.

The OE caps already have the holes in them & they're centered too. I did this many years ago using stock caps, 3-bar spinner, & used 1/4" bolts w/lock-tite to secure them.

In the 90's we did a similar mod only using aluminum covers that bolted in place the same way & used an alum hex nut to top them off. It made the ralleys look almost like a billet wheel for cheap.

Malo83 · 03-17-2008, 10:05 PM

Not a Rallye,but hey it's got spinners

MattA · 03-18-2008, 05:40 PM

Quote:

Originally Posted by SCOTI

The OE caps already have the holes in them & they're centered too. I did this many years ago using stock caps, 3-bar spinner, & used 1/4" bolts w/lock-tite to secure them.

In the 90's we did a similar mod only using aluminum covers that bolted in place the same way & used an alum hex nut to top them off. It made the ralleys look almost like a billet wheel for cheap.

If I remember correctly we had to remove some material form the cap for the spinner to fit correctly.
But it has been a while, your results may vary.
matt

AceX · 03-17-2008, 11:26 PM

**old Rusty C10** · 03-18-2008, 05:37 AM

better be careful doing that some states starting with NY are trying to outlaw spinners as they say they come off and cause damages

killthewabbit · 03-18-2008, 08:24 AM

Always liked the spinners on Rallys look. I like spinners on a lot of old school wheels, though - especially Malo's.

kevinr1970 · 03-18-2008, 08:36 AM

From the Ebay link posted above:

Mr79C10 · 03-20-2008, 01:45 AM

Quote:

Originally Posted by kevinr1970

From the Ebay link posted above:

LOL,, I was bidding on a set with those spinners, Ill sport em on my ride!

rod86 · 03-20-2008, 02:00 AM

Quote:

Originally Posted by Mr79C10

LOL,, I was bidding on a set with those spinners, Ill sport em on my ride!

oh so you got them ones i was watching on ebay... i was going to get them..

but i got difrent style with straight bars...

Mr79C10 · 03-20-2008, 11:08 AM

Quote:

Originally Posted by rod86

oh so you got them ones i was watching on ebay... i was going to get them..

but i got difrent style with straight bars...

LOL,,, nah, I didnt get them, With shipping and everything wasnt worth it to me. But still looking,,,

DillonOpossum · 01-15-2016, 03:18 PM

Those are pretty Dope! Also you don't really see steel wheels with spinners, kinda makes it even more unique with a kool and weird 70's vibe.

dons82 · 04-28-2018, 03:46 PM

hey looking all over the web cant find spinner / knock off let me know thanks don

rod86 · 03-18-2008, 03:41 PM

im realy thinking bout getting some. they look kool... :P

jchav62 · 03-18-2008, 06:43 PM

I like this idea! I may have to use it on the '73....

RWJJR · 03-19-2008, 04:46 AM

Im gonna pick up a set at the corvette expo next week,Ill post pics when I get em on!!!

chevymotocross · 03-19-2008, 04:49 AM

That's funny, when I saw this topic I thought it was going to pertain to the spinner hubcaps sold at pepboys or something lol. These spinners you guys show look great imo. Hey acex, nice truck, what drop you running. I'm guessing 255/60/15 tires??

jermasaurus · 03-20-2008, 02:47 AM

Don't have a close picture at the moment

rod86 · 03-20-2008, 12:28 PM

Quote:

Originally Posted by jermasaurus

Don't have a close picture at the moment

so thats what my wheels will look like black.... im goin to paint the center caps black aswell but...

nice ride

jermasaurus · 03-22-2008, 02:53 AM

Quote:

Originally Posted by rod86

so thats what my wheels will look like black.... im goin to paint the center caps black aswell but...

nice ride

I just couldn't picture the truck without the rims being black. I actually ran into the guy who owned my truck 2 people before me. I thought he was mistaken about it being the same truck. Turns out he is the one who painted the rims and headlight bezels black.

RWJJR · 03-30-2008, 03:41 AM

Well I got mine on this evening,Im really pleased.Total investment of $25 ,It doesnt even bother me that my wheels are 7s anymore!!!

03-17-2008, 09:12 AM	#1
RWJJR Registered User Join Date: Feb 2005 Location: EAST TENNESSEE Posts: 233	PIC REQUEST-Spinners (knock offs) on Rally wheels Lets see some pics of them on 73-87s __________________ 1980 Silverado short bed 1993 GMC 1500 LS swap 2006 Lifted Z71 Crew Cab Last edited by RWJJR; 03-30-2008 at 03:36 AM.

03-17-2008, 09:15 AM	#2
agent orange Registered User Join Date: Jan 2008 Location: Stockton Ca Posts: 63	Re: ,PIC REQUEST-Spinners (knock offs) on Rally wheels i don't think i'v ever seen those before __________________ 1966 GMC Current project 1966 Chevy C10 Sold 1985 C10 Sold 1968 El camino Sold 1954 Ford Anglia Sold 1973 GMC Suburban Sold 1974 Chevy C10 Sold

03-17-2008, 10:12 AM	#4
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Re: ,PIC REQUEST-Spinners (knock offs) on Rally wheels I want some too...Here is a set on a truck I tried to buy. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

03-17-2008, 07:51 PM	#5
1984 swb chevy Registered User Join Date: Nov 2007 Location: New Jersey Posts: 466	Re: ,PIC REQUEST-Spinners (knock offs) on Rally wheels I put a set on a 77 step side I had about 12 years ago. I found a set of spinners that fit the stock end cap of the rally wheel. I just drilled a hole in the center cap and put them on.

03-17-2008, 10:05 PM	#7
Malo83 Cruzzzn' Vet Join Date: Jan 2005 Location: Porterville,Ca. Posts: 1,918	Re: ,PIC REQUEST-Spinners (knock offs) on Rally wheels Not a Rallye,but hey it's got spinners

03-17-2008, 11:26 PM	#9
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: ,PIC REQUEST-Spinners (knock offs) on Rally wheels __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

03-18-2008, 05:37 AM	#10
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,267	Re: ,PIC REQUEST-Spinners (knock offs) on Rally wheels better be careful doing that some states starting with NY are trying to outlaw spinners as they say they come off and cause damages __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

03-18-2008, 08:24 AM	#11
killthewabbit Spear and magic helmet! Join Date: Oct 2006 Location: Nashville, TN Posts: 1,226	Re: ,PIC REQUEST-Spinners (knock offs) on Rally wheels Always liked the spinners on Rallys look. I like spinners on a lot of old school wheels, though - especially Malo's.

03-18-2008, 08:36 AM	#12
kevinr1970 Senior Member Join Date: Aug 2004 Location: Everett, WA Posts: 2,316	Re: ,PIC REQUEST-Spinners (knock offs) on Rally wheels From the Ebay link posted above: Attached Images __________________ 2009 Honda Fit CfC (bsf 44.9 mpg) 2000 Tahoe Limited 1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below 1991 GMC CrewCab Dually 4x4, just going to fix things up for now 1982/1989 K5/GMC Jimmy 2wd 1987 GMC 1/2 ton swb 2wd Crew (sold)

01-15-2016, 03:18 PM	#16
DillonOpossum Registered User Join Date: Jan 2016 Location: Barstow, California Posts: 3	Re: ,PIC REQUEST-Spinners (knock offs) on Rally wheels Those are pretty Dope! Also you don't really see steel wheels with spinners, kinda makes it even more unique with a kool and weird 70's vibe.

04-28-2018, 03:46 PM	#17
dons82 Registered User Join Date: Apr 2018 Location: brooklyn conn Posts: 5	hey looking all over the web cant find spinner / knock off let me know thanks don

03-18-2008, 03:41 PM	#18
rod86 great southern land Join Date: Feb 2008 Location: perth - australia Posts: 6,194	Re: ,PIC REQUEST-Spinners (knock offs) on Rally wheels im realy thinking bout getting some. they look kool... :P

03-18-2008, 06:43 PM	#19
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: ,PIC REQUEST-Spinners (knock offs) on Rally wheels I like this idea! I may have to use it on the '73.... __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

03-19-2008, 04:46 AM	#20
RWJJR Registered User Join Date: Feb 2005 Location: EAST TENNESSEE Posts: 233	Re: ,PIC REQUEST-Spinners (knock offs) on Rally wheels Im gonna pick up a set at the corvette expo next week,Ill post pics when I get em on!!! __________________ 1980 Silverado short bed 1993 GMC 1500 LS swap 2006 Lifted Z71 Crew Cab

03-19-2008, 04:49 AM	#21
chevymotocross Registered User Join Date: May 2007 Location: East Haven, CT Posts: 882	Re: ,PIC REQUEST-Spinners (knock offs) on Rally wheels That's funny, when I saw this topic I thought it was going to pertain to the spinner hubcaps sold at pepboys or something lol. These spinners you guys show look great imo. Hey acex, nice truck, what drop you running. I'm guessing 255/60/15 tires??



Register or Log In To remove these advertisements.

03-20-2008, 02:47 AM	#22
jermasaurus Registered User Join Date: Dec 2004 Location: New Lenox, IL Posts: 442	Re: ,PIC REQUEST-Spinners (knock offs) on Rally wheels Don't have a close picture at the moment Attached Images __________________ 79 Jimmy slammed AKA James Down

03-30-2008, 03:41 AM	#25
RWJJR Registered User Join Date: Feb 2005 Location: EAST TENNESSEE Posts: 233	Re: ,PIC REQUEST-Spinners (knock offs) on Rally wheels Well I got mine on this evening,Im really pleased.Total investment of $25 ,It doesnt even bother me that my wheels are 7s anymore!!! __________________ 1980 Silverado short bed 1993 GMC 1500 LS swap 2006 Lifted Z71 Crew Cab

Register or Log In To remove these advertisements.