MY build thread... - Page 25 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shortbed70 · 02-22-2012, 12:22 AM

I'm going LS some day... I'm waiting to hear about one this week so fingers crossed...Btw I never did hear a sound clip of your motor!!
Posted via Mobile Device

fryco · 02-22-2012, 07:28 PM

Quote:

Originally Posted by shortbed70

I'm going LS some day... I'm waiting to hear about one this week so fingers crossed...Btw I never did hear a sound clip of your motor!!
Posted via Mobile Device

I'll get you a sound clip, just have to swap out line lock switches. Then I'll make you a proper sound track. Won't be be until mid-April though, sounds like winter is going to give it another try Sunday into Monday. I ran out of time last fall weather wise...

shortbed70 · 02-25-2012, 11:45 PM

Well I have a motor issue now for some reason!!!! No oil on the passenger side rockers!!! Time to pull the dizzy and buy a priming tool and hope that the lifters just bleed off. Don't know how it would be on one side only but who knows. How frustrating!!!!!
Posted via Mobile Device

daverod · 02-26-2012, 12:59 PM

My worst nightmare. That sucks.

shortbed70 · 02-26-2012, 03:41 PM

Less than an hours run time on the motor with the new heads. Cam is old...
Posted via Mobile Device

**LostMy65** · 02-26-2012, 03:52 PM

That's really odd.

daverod · 02-27-2012, 10:59 AM

Old cam new lifters? Hope it's not too bad. Last weekend I torn the end off the crank on my snowmachine ...if that helps.

shortbed70 · 02-27-2012, 04:51 PM

Old cam and old lifters. Been ran for years now after the head swap now the issue. Im so damn frustrated now that I am really loosing intrest on it! Maybe it will be something simple but I'm not real confident.
Posted via Mobile Device

daverod · 02-27-2012, 06:30 PM

Ya my sled thing was simple. PTO in one hand engine in the other.

Maybe your thing will be better.

protrash64 · 02-27-2012, 10:08 PM

That sucks Troy....hope it's not too serious. When you go from pre-86 heads to Vortecs, do you use different pushrods or are they the same?

shortbed70 · 02-27-2012, 10:55 PM

Well guys I'm back on track!!! KISS factor...

Long story short; distributor pad is 1/8" taller than stock,old gasket stuck on distributor (I install new one without checking) and not completely tightening dizzy down.... BOOM got oil to all rockers on both sides... Back in business!!!!
Posted via Mobile Device

shortbed70 · 02-27-2012, 11:20 PM

How complicated is it to put in a windshield? I need to get mine in ASAP.
Posted via Mobile Device

protrash64 · 02-28-2012, 12:01 AM

I've done all the windows except the windshield, but seen one done. Put gasket on glass, lay glass against opening with a rope in the channel, and pull rope into vehicle while pressing on glass from outside. You can lube with Windex. Cuss and repeat as neccessary!!

Alan's Classic · 02-28-2012, 12:16 AM

Quote:

Originally Posted by shortbed70

Well guys I'm back on track!!! KISS factor...

Long story short; distributor pad is 1/8" taller than stock,old gasket stuck on distributor (I install new one without checking) and not completely tightening dizzy down.... BOOM got oil to all rockers on both sides... Back in business!!!!
Posted via Mobile Device

Glad you figured it out!!

Quote:

Originally Posted by protrash64

I've done all the windows except the windshield, but seen one done. Put gasket on glass, lay glass against opening with a rope in the channel, and pull rope into vehicle while pressing on glass from outside. You can lube with Windex. Cuss and repeat as neccessary!!

My windshield was easier than the back glass. I thought it would be the other way around.

shortbed70 · 02-28-2012, 12:54 AM

Quote:

Originally Posted by protrash64

I've done all the windows except the windshield, but seen one done. Put gasket on glass, lay glass against opening with a rope in the channel, and pull rope into vehicle while pressing on glass from outside. You can lube with Windex. Cuss and repeat as neccessary!!

I did alot of that on the rear window LOL!!

Quote:

Originally Posted by Alan's Classic

Glad you figured it out!!

My windshield was easier than the back glass. I thought it would be the other way around.

I'm also glad it was simple....think I'm gonna give the glass a shot...
Posted via Mobile Device

shortbed70 · 02-29-2012, 10:45 PM

Well windshield is in and it's not as easy as it looks... But one more think off the list...Wish I could post pics
Posted via Mobile Device

Alan's Classic · 02-29-2012, 10:49 PM

shortbed70 · 03-01-2012, 12:53 AM

If I could get someone to run my phone I would get a driving video this weekend hopefully...
Posted via Mobile Device

daverod · 03-01-2012, 11:08 AM

Don't you have any of those "Will work for food" people around there. Your making me want to order a new rubber seal for my windshield.

shortbed70 · 03-01-2012, 09:25 PM

Well guys took it for its longest drive since its been togather about 2 miles and wow!!! What a blast. People were in awe as I passed them...
Posted via Mobile Device

fryco · 03-01-2012, 11:34 PM

Good to hear you got it straightened out. Isn't it crazy how a little ride makes a few hundred hours of work seem less work like!!!!

What did you come up with for paint scream? I know know you were kicking around a few ideas...

We just got a foot of snow yesterday, taking mine out is a month or two away.

shortbed70 · 03-02-2012, 08:48 AM

Quote:

Originally Posted by fryco

Good to hear you got it straightened out. Isn't it crazy how a little ride makes a few hundred hours of work seem less work like!!!!

What did you come up with for paint scream? I know know you were kicking around a few ideas...

We just got a foot of snow yesterday, taking mine out is a month or two away.

Well it's going to stay satin black for a while. Gonna drive it and get the kinks out of it then maybe paint next winter if I'm still employed! The drive was absolutely worth all the work and it takes something like that to really relight the flame to work on it..
Posted via Mobile Device

McMurphy · 03-02-2012, 05:39 PM

I bet... nothing like a 5 minute ride to recharge you for 200 more hours of working eh?

Congrats on the drive!!
I am still a few months from that on mine.

shortbed70 · 03-03-2012, 01:44 AM

man this thing is unreal. It sat outside for a few hours tonight in about 45 degree weather and it fired right up no pumping the gas or anything..Fire lit and ready to rock...Hopefully I'll have time to get this bed done in the next few weeks. I have to finish up this bike I'm painting first though...

fryco · 03-06-2012, 08:47 PM

Yours has mine beat, at 45degrees mine won't start. Pump and crank all you want. That big ass chokless carburter sounded good when I ordered it.

(methonal does help either). I have to prime it with gas when its cold. Saving almost $200 a fill-up is worth the extra little bite of messing around with methonal. I did manage to get the old beast up to 4 miles per gallon.

Pretty bad when your happy to get a hundred miles on a 32 gallon tank.

My friends are getting their circle track cars ready, hearing my buddies mod last weekend left me jones'n bad!!!!

Ohh well, within a month or so it will be going.

What do you do for a living that your worried about being laid off?

02-22-2012, 12:22 AM	#601
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... I'm going LS some day... I'm waiting to hear about one this week so fingers crossed...Btw I never did hear a sound clip of your motor!! Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

02-25-2012, 11:45 PM	#603
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Well I have a motor issue now for some reason!!!! No oil on the passenger side rockers!!! Time to pull the dizzy and buy a priming tool and hope that the lifters just bleed off. Don't know how it would be on one side only but who knows. How frustrating!!!!! Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

02-26-2012, 12:59 PM	#604
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: MY build thread... My worst nightmare. That sucks. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

02-26-2012, 03:41 PM	#605
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Less than an hours run time on the motor with the new heads. Cam is old... Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

02-26-2012, 03:52 PM	#606
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,497	Re: MY build thread... That's really odd. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

02-27-2012, 10:59 AM	#607
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: MY build thread... Old cam new lifters? Hope it's not too bad. Last weekend I torn the end off the crank on my snowmachine ...if that helps. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

02-27-2012, 04:51 PM	#608
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Old cam and old lifters. Been ran for years now after the head swap now the issue. Im so damn frustrated now that I am really loosing intrest on it! Maybe it will be something simple but I'm not real confident. Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

02-27-2012, 06:30 PM	#609
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: MY build thread... Ya my sled thing was simple. PTO in one hand engine in the other. Maybe your thing will be better. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

02-27-2012, 10:08 PM	#610
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: MY build thread... That sucks Troy....hope it's not too serious. When you go from pre-86 heads to Vortecs, do you use different pushrods or are they the same? __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-27-2012, 10:55 PM	#611
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Well guys I'm back on track!!! KISS factor... Long story short; distributor pad is 1/8" taller than stock,old gasket stuck on distributor (I install new one without checking) and not completely tightening dizzy down.... BOOM got oil to all rockers on both sides... Back in business!!!! Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

02-27-2012, 11:20 PM	#612
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... How complicated is it to put in a windshield? I need to get mine in ASAP. Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

02-28-2012, 12:01 AM	#613
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: MY build thread... I've done all the windows except the windshield, but seen one done. Put gasket on glass, lay glass against opening with a rope in the channel, and pull rope into vehicle while pressing on glass from outside. You can lube with Windex. Cuss and repeat as neccessary!! __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-29-2012, 10:45 PM	#616
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Well windshield is in and it's not as easy as it looks... But one more think off the list...Wish I could post pics Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

02-29-2012, 10:49 PM	#617
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: MY build thread... __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

03-01-2012, 12:53 AM	#618
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... If I could get someone to run my phone I would get a driving video this weekend hopefully... Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274



Register or Log In To remove these advertisements.

03-01-2012, 11:08 AM	#619
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: MY build thread... Don't you have any of those "Will work for food" people around there. Your making me want to order a new rubber seal for my windshield. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

03-01-2012, 09:25 PM	#620
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Well guys took it for its longest drive since its been togather about 2 miles and wow!!! What a blast. People were in awe as I passed them... Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

03-01-2012, 11:34 PM	#621
fryco Registered User Join Date: Jun 2009 Location: somewhere,wi Posts: 170	Re: MY build thread... Good to hear you got it straightened out. Isn't it crazy how a little ride makes a few hundred hours of work seem less work like!!!! What did you come up with for paint scream? I know know you were kicking around a few ideas... We just got a foot of snow yesterday, taking mine out is a month or two away.

03-02-2012, 05:39 PM	#623
McMurphy Registered User Join Date: Sep 2011 Location: Tacoma, WA Posts: 2,425	Re: MY build thread... I bet... nothing like a 5 minute ride to recharge you for 200 more hours of working eh? Congrats on the drive!! I am still a few months from that on mine. __________________ Michael McMurphy My 66 Stepside My 64 Tow Truck My 66 Tempest Table Of Contents Added to Page1

03-03-2012, 01:44 AM	#624
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... man this thing is unreal. It sat outside for a few hours tonight in about 45 degree weather and it fired right up no pumping the gas or anything..Fire lit and ready to rock...Hopefully I'll have time to get this bed done in the next few weeks. I have to finish up this bike I'm painting first though... __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

03-06-2012, 08:47 PM	#625
fryco Registered User Join Date: Jun 2009 Location: somewhere,wi Posts: 170	Re: MY build thread... Yours has mine beat, at 45degrees mine won't start. Pump and crank all you want. That big ass chokless carburter sounded good when I ordered it. (methonal does help either). I have to prime it with gas when its cold. Saving almost $200 a fill-up is worth the extra little bite of messing around with methonal. I did manage to get the old beast up to 4 miles per gallon. Pretty bad when your happy to get a hundred miles on a 32 gallon tank. My friends are getting their circle track cars ready, hearing my buddies mod last weekend left me jones'n bad!!!! Ohh well, within a month or so it will be going. What do you do for a living that your worried about being laid off?

Register or Log In To remove these advertisements.