MY build thread... - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alan's Classic · 07-11-2009, 03:05 PM

Quote:

Originally Posted by shortbed70

Thanks guys I'm having a hard time doing this work because its messy and tiring especially in 90% humidity. Its almost done but then I get to sand the uro primer so I'm hopping when its all primed I can take alittle brake. I've put in about 20 hrs this week on it plus 40hr week.

Makes for a long week don't it?

BTW nice progress!!

shortbed70 · 07-11-2009, 04:17 PM

yes it does but it will be well worth it soon.

shortbed70 · 07-15-2009, 12:12 AM

Heres some pics from today at 105 degree weather. I ground out about a half a can of bondo out of the drivers door so now I have some rust and dents to fix but nothing major.

alexxwing · 07-15-2009, 12:19 AM

bondo is a great tool when used right but some peaple think a filler is a dent remover my friends 73 had a inch of bondo on the fender haha we found out when he hit a pole and a chunk fell out haha truck is looking good tho

shortbed70 · 07-15-2009, 10:35 PM

I agree WHEN USED RIGHT but some people think it can fix all dents. So as you can see in the last pics the pile of mud I ground out and it only took me about 20 studs to fix the actual problem and one patch panel I will cut out and weld in tomarrow then I'll post pics. I will still have to set the gaps on the fender when I gat one but thats a later story... STAY TUNED and thanks for the views and kind words.. This board rocks and the people are awsome. If you can meet anyone whomever you can its an experience to say the least. Alot of use younger guys can learn alot from meeting some of the guys that have been around these trucks alot longer. PICS tomarrow when I'm done.

shortbed70 · 07-19-2009, 03:48 PM

PROGRESS I got the dash,hood,back of the cab primed and ready for guide coat and blocking. Here you go.

shortbed70 · 07-19-2009, 03:50 PM

Ok heres the rest

joe231 · 07-19-2009, 05:06 PM

Nice!!!!

protrash64 · 07-19-2009, 06:44 PM

Lookin' good S/B70.......you're on a roll for sure.

shortbed70 · 07-19-2009, 07:56 PM

Thanks guys I'm trying to move right along to get it driving so I can move it in and out of the garage on its own instead of pushing it and I'm ready to drive it...I need to get the dekups setup so I can spray the roof inside and then its upside down sanding YAY...Hey progress is progress right. I also got the old truck out of my shop to my father in laws and he was givin me crap about what all has to be done and yada yada..

Alan's Classic · 07-19-2009, 08:45 PM

Nice progress.

It's always fun spraying primer.

jgh64pkup · 07-19-2009, 09:41 PM

looks good

shortbed70 · 07-21-2009, 06:28 PM

sanding SUCKS. Well the first round of blocking is done on the back of the cab and hood,now I need to sharpen up the welded hood seam some and fill some small spots then hopefully I can reprime thursday night.

shortbed70 · 07-26-2009, 02:12 PM

Well got the bottom of the drivers door patch tacked in and the hood seam is jaust about done (ALOT OF WORK) and roof is worked and primed. Now back to sanding.

shortbed70 · 07-26-2009, 02:17 PM

Forgot the pics.....

joe231 · 07-26-2009, 02:43 PM

MAN!!!
that hood looks amazing!!!

Alan's Classic · 07-26-2009, 04:53 PM

Saaaweeeeeeeet!!!

shortbed70 · 07-26-2009, 06:53 PM

Thanks guys the hood takes alot more work than I thought it would. Its worked out so far.

shortbed70 · 07-30-2009, 10:26 PM

Wow when things look straight block again I have a few more spots to fix on the back of the cab and some small spots on the hood but there almost done I will post pics when done. Hoods commin along nicely theres just two small spots I neeed to build up but thats it.

shortbed70 · 08-04-2009, 10:00 PM

Nothing new to report just slingin some mud to get my body line crisp on the drivers door and sanding the roof but all the spots on the back of the cab are done just waiting to get the rest done so I can prime the hood back of the cab and roof for the final time I hope. Then seam seal everything and shoot some epoxy on the inside of the cab.

protrash64 · 08-04-2009, 10:05 PM

Just caught up with this.....nice work and lookin' really good. I was joking about trying to keep up with you but no way

......new job is kickin' my butt and I have no juice left in the batteries. Cant wait to see some paint soon.

shortbed70 · 08-04-2009, 10:20 PM

Could be a LONG time for paint because I still havent decided on a color and my morgage company is screwin with my account and overdrew it twice costing me about 1200 more than I had so what do they do put it on my principal so now I'm trying to catch up on bills so the material I have is all I can get and then I'm done for a while. Working on it just helps me get my mind off BILLS and day to day stuff. Thanks for the words of insperation and I hope things work out and dont kill yourself working I wish I could get more hours...Hows yours comming.

shortbed70 · 08-04-2009, 10:25 PM

Heres a few pics after first priming, See all the low spots. You can just barley see sanding scratches in the primer so there not that bad but sure looks it. BTW this is my first DIY job without help.

protrash64 · 08-05-2009, 07:30 PM

Its hard to do it fast without tons of experience. I also keep seeing more stuff that needs attention as I go

....seems like it wont end, but it is good on keeping the mind busy and putting you to sleep really well after a day sanding.

daverod · 08-05-2009, 07:37 PM

Looks good so far. Your doing great for not having much experience. I look back to stuff I did 6 months ago and laugh. I hear ya about finding new stuff. I'm trying to get my seam on the front of my hood right. Yours looks great. You just keep getting more critical and picky and wanting to do better. And then you turn into

07-11-2009, 04:17 PM	#102
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... yes it does but it will be well worth it soon. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

07-15-2009, 12:12 AM	#103
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Heres some pics from today at 105 degree weather. I ground out about a half a can of bondo out of the drivers door so now I have some rust and dents to fix but nothing major. Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

07-15-2009, 12:19 AM	#104
alexxwing Registered User Join Date: Jul 2009 Location: san jose CA Posts: 62	Re: MY build thread... bondo is a great tool when used right but some peaple think a filler is a dent remover my friends 73 had a inch of bondo on the fender haha we found out when he hit a pole and a chunk fell out haha truck is looking good tho __________________ Smoke Tires, Not Drugs!

07-15-2009, 10:35 PM	#105
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... I agree WHEN USED RIGHT but some people think it can fix all dents. So as you can see in the last pics the pile of mud I ground out and it only took me about 20 studs to fix the actual problem and one patch panel I will cut out and weld in tomarrow then I'll post pics. I will still have to set the gaps on the fender when I gat one but thats a later story... STAY TUNED and thanks for the views and kind words.. This board rocks and the people are awsome. If you can meet anyone whomever you can its an experience to say the least. Alot of use younger guys can learn alot from meeting some of the guys that have been around these trucks alot longer. PICS tomarrow when I'm done. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

07-19-2009, 03:48 PM	#106
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... PROGRESS I got the dash,hood,back of the cab primed and ready for guide coat and blocking. Here you go. Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

07-19-2009, 03:50 PM	#107
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Ok heres the rest Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

07-19-2009, 05:06 PM	#108
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: MY build thread... Nice!!!! __________________ *CHEVY ONLY*

07-19-2009, 06:44 PM	#109
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: MY build thread... Lookin' good S/B70.......you're on a roll for sure. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

07-19-2009, 07:56 PM	#110
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Thanks guys I'm trying to move right along to get it driving so I can move it in and out of the garage on its own instead of pushing it and I'm ready to drive it...I need to get the dekups setup so I can spray the roof inside and then its upside down sanding YAY...Hey progress is progress right. I also got the old truck out of my shop to my father in laws and he was givin me crap about what all has to be done and yada yada.. Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

07-19-2009, 08:45 PM	#111
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: MY build thread... Nice progress. It's always fun spraying primer. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

07-19-2009, 09:41 PM	#112
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: MY build thread... looks good __________________ Gage 1967 C10 Shortbed Stepside

07-21-2009, 06:28 PM	#113
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... sanding SUCKS. Well the first round of blocking is done on the back of the cab and hood,now I need to sharpen up the welded hood seam some and fill some small spots then hopefully I can reprime thursday night. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

07-26-2009, 02:12 PM	#114
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Well got the bottom of the drivers door patch tacked in and the hood seam is jaust about done (ALOT OF WORK) and roof is worked and primed. Now back to sanding. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

07-26-2009, 02:17 PM	#115
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Forgot the pics..... Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

07-26-2009, 02:43 PM	#116
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: MY build thread... MAN!!! that hood looks amazing!!! __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

07-26-2009, 04:53 PM	#117
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: MY build thread... Saaaweeeeeeeet!!! __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

07-26-2009, 06:53 PM	#118
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Thanks guys the hood takes alot more work than I thought it would. Its worked out so far. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

07-30-2009, 10:26 PM	#119
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Wow when things look straight block again I have a few more spots to fix on the back of the cab and some small spots on the hood but there almost done I will post pics when done. Hoods commin along nicely theres just two small spots I neeed to build up but thats it. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

08-04-2009, 10:00 PM	#120
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Nothing new to report just slingin some mud to get my body line crisp on the drivers door and sanding the roof but all the spots on the back of the cab are done just waiting to get the rest done so I can prime the hood back of the cab and roof for the final time I hope. Then seam seal everything and shoot some epoxy on the inside of the cab. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

08-04-2009, 10:05 PM	#121
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: MY build thread... Just caught up with this.....nice work and lookin' really good. I was joking about trying to keep up with you but no way......new job is kickin' my butt and I have no juice left in the batteries. Cant wait to see some paint soon. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

08-04-2009, 10:20 PM	#122
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Could be a LONG time for paint because I still havent decided on a color and my morgage company is screwin with my account and overdrew it twice costing me about 1200 more than I had so what do they do put it on my principal so now I'm trying to catch up on bills so the material I have is all I can get and then I'm done for a while. Working on it just helps me get my mind off BILLS and day to day stuff. Thanks for the words of insperation and I hope things work out and dont kill yourself working I wish I could get more hours...Hows yours comming. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

08-04-2009, 10:25 PM	#123
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Heres a few pics after first priming, See all the low spots. You can just barley see sanding scratches in the primer so there not that bad but sure looks it. BTW this is my first DIY job without help. Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 Last edited by shortbed70; 08-04-2009 at 10:31 PM. Reason: forgot some stuff

08-05-2009, 07:30 PM	#124
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: MY build thread... Its hard to do it fast without tons of experience. I also keep seeing more stuff that needs attention as I go....seems like it wont end, but it is good on keeping the mind busy and putting you to sleep really well after a day sanding. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

08-05-2009, 07:37 PM	#125
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: MY build thread... Looks good so far. Your doing great for not having much experience. I look back to stuff I did 6 months ago and laugh. I hear ya about finding new stuff. I'm trying to get my seam on the front of my hood right. Yours looks great. You just keep getting more critical and picky and wanting to do better. And then you turn into __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 08-05-2009 at 07:39 PM.

Register or Log In To remove these advertisements.