Throw out bearing length? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

eric67m · 03-08-2009, 11:29 PM

My truck: 1967 Chevy K10, 327, sm465, np205. I need to replace my throw out bearing. I ordered a new one from my local auto parts store. When I compared it to my old one the length was different. They only showed one bearing from mid 60's thru the later 70's .

My old bearing (on left)=1.875" (I dont know if this was proper)
New bearing (on right)=1.255"
In classic industries they show that all bearings are 1 7/32 or 1.21875 tall.

What is the proper height for my application.

03-08-2009, 11:29 PM	#1
eric67m Registered User Join Date: Apr 2005 Location: Monroe, WA Posts: 298	Throw out bearing length? My truck: 1967 Chevy K10, 327, sm465, np205. I need to replace my throw out bearing. I ordered a new one from my local auto parts store. When I compared it to my old one the length was different. They only showed one bearing from mid 60's thru the later 70's . My old bearing (on left)=1.875" (I dont know if this was proper) New bearing (on right)=1.255" In classic industries they show that all bearings are 1 7/32 or 1.21875 tall. What is the proper height for my application. Attached Images __________________ 67 K10, lwb, fleetside, 327, 4spd, 205, cab and 3/4 frame swap, 14 bolt, big window, and a "rustoleum roll job"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.