The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-19-2012, 09:01 PM   #1
Chevysdominate
Registered User
 
Chevysdominate's Avatar
 
Join Date: Jul 2006
Location: Springtucky, Oregon
Posts: 265
6000 rpm tach anyone...

I thought I'd share a little project I've been working on. I like the stock tachometers, but the 5000 rpm limit was a killer with a modern engine. So with a little thinking and tearing apart of a few tachometers this is what I've come up with. A 6000 rpm tachometer that looks very similar to the original. It really just bolts in with no fuss at all. I've gone through a few renditions of the gauge face and I'm still working on that. Its hard to find a font that matches the original. As you can see the titanium white paper really puts to shame the old and faded white markings from the cluster. I need to do something about that.
Attached Images
     
Chevysdominate is offline   Reply With Quote
Old 04-19-2012, 10:33 PM   #2
64shortbox
Registered User
 
64shortbox's Avatar
 
Join Date: Jan 2011
Location: Tulare, CA
Posts: 730
Re: 6000 rpm tach anyone...

Excelent job!! What Tach did you use?
64shortbox is offline   Reply With Quote
Old 04-20-2012, 01:00 AM   #3
70cst
Senior Member
 
70cst's Avatar
 
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,337
Re: 6000 rpm tach anyone...

Very impressive
__________________
A husband can be right...or...A husband can be happy.

67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk.

1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc

JOHN 17:3...The better side of "LIFE"


Remember: Everyday is a good day...Some are just gooder!
70cst is offline   Reply With Quote
Old 04-20-2012, 02:20 AM   #4
jocko
Senior Member
 
jocko's Avatar
 
Join Date: Oct 2009
Location: Godley, TX
Posts: 17,922
Re: 6000 rpm tach anyone...

That looks good! I'm usually hesitant about stuffin individual non-factory gauges into a stock dash - because they often don't seem to "match". But yours matches quite well and the sweep and face size is perfect. Nice job!!
jocko is offline   Reply With Quote
Old 04-20-2012, 09:00 PM   #5
qksilver
Senior Member
 
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
Re: 6000 rpm tach anyone...

Let us in on the secret, what tach? I am trying to update my dash, I have the vacuum gauge already and was looking for a tach.

Thanks,
Steve
qksilver is offline   Reply With Quote
Old 04-20-2012, 11:03 PM   #6
Chevysdominate
Registered User
 
Chevysdominate's Avatar
 
Join Date: Jul 2006
Location: Springtucky, Oregon
Posts: 265
Re: 6000 rpm tach anyone...

The tach is marked as a Super Pro but it's an 8000 rpm tach to start with. The secret is refacing it to 6000 rpm while retaining the same 90 degree sweep. Then running the tach in 4 cylinder mode. I know it sounds weird but the math works out. I was just testing the accuracy against my laptop with OBDWiz and it works great. I think I bought the tach at Carquest but I cant be sure. Ive seen them labeled as other brands too. They're all the same tach except the gauge face is different.

Its the same tach as in this article which was my inspiration, but I didn't really like the execution. I also didn't like the small resolution a 90 degree sweep 8000rpm tach gives. So I thought about it for a bit and realized I could reface it as a 6000 rpm tach and run it in 4 cylinder mode.

I'm not 100% satisfied with the first iteration of the tach so I'll probably make another one this week. I might do a small writeup showing all the things needed to convert the tach to a bolt in install too.
Chevysdominate is offline   Reply With Quote
Old 04-21-2012, 07:13 AM   #7
MalibuKasey
Artist
 
MalibuKasey's Avatar
 
Join Date: Jan 2010
Location: Rockwell NC
Posts: 422
Re: 6000 rpm tach anyone...

Please do. Looks good!
Posted via Mobile Device
__________________
66 Chevy C10 283ci~cough~ SBW Fleet Buttercup '66
MalibuKasey is offline   Reply With Quote
Old 04-21-2012, 08:58 PM   #8
qksilver
Senior Member
 
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
Re: 6000 rpm tach anyone...

yes, please do............accuracy is nice, but for me being close is good enough for what I want.

Thanks,
Steve
qksilver is offline   Reply With Quote
Old 04-23-2012, 03:35 PM   #9
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,457
Re: 6000 rpm tach anyone...

subscribed
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035
LostMy65 is offline   Reply With Quote
Old 04-25-2012, 02:51 AM   #10
Chevysdominate
Registered User
 
Chevysdominate's Avatar
 
Join Date: Jul 2006
Location: Springtucky, Oregon
Posts: 265
Re: 6000 rpm tach anyone...

I got it installed and love not having a tach on my column anymore. I need to get new set of white guage faces to match the white letters on the tach. Unfortunately my radiator died so that will postpone a second tach build for a week or so.
Attached Images
 
Chevysdominate is offline   Reply With Quote
Old 08-04-2013, 10:31 AM   #11
earl84
Registered User
 
Join Date: Aug 2011
Location: Montrose, CO
Posts: 972
Re: 6000 rpm tach anyone...

Hey, chevysdominate, can you share any more details on how you did this? It looks SO NICE. And I do like your execution of it better than the original article you used as a reference. Would love some more details if you have the time.
Incidentally, that tach is available at Carquest, P/N 81316, $59.99 online.
earl84 is offline   Reply With Quote
Old 08-06-2013, 12:42 AM   #12
Chevysdominate
Registered User
 
Chevysdominate's Avatar
 
Join Date: Jul 2006
Location: Springtucky, Oregon
Posts: 265
Re: 6000 rpm tach anyone...

Its been a while and i never got around to doing the second one. I've been busy stuffing an lq4 into a series 1 1973 jaguar xj12.

i wish i had taken more pictures but i was just flying by the seat of my pants when i made it. I'll document the next build much better.

You basically remove everything from the 8000 rpm tach and you are left with what looks like it belongs in a clock. The spacing on the studs is close but you need to drill new holes for the gauge face to bolt to the studs of the tach mechanism. I'll try to aid as much as i can if you have any specific questions.

Quote:
Originally Posted by earl84 View Post
Hey, chevysdominate, can you share any more details on how you did this? It looks SO NICE. And I do like your execution of it better than the original article you used as a reference. Would love some more details if you have the time.
Incidentally, that tach is available at Carquest, P/N 81316, $59.99 online.
Chevysdominate is offline   Reply With Quote
Old 08-16-2013, 06:00 PM   #13
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,457
Re: 6000 rpm tach anyone...

Quote:
Originally Posted by earl84 View Post
Hey, chevysdominate, can you share any more details on how you did this? It looks SO NICE. And I do like your execution of it better than the original article you used as a reference. Would love some more details if you have the time.
Incidentally, that tach is available at Carquest, P/N 81316, $59.99 online.
That Tach you list appears to be 2" Diameter.
I think we need Part Number: 81315 - Price: $72.99
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035
LostMy65 is offline   Reply With Quote
Old 08-17-2013, 10:20 AM   #14
earl84
Registered User
 
Join Date: Aug 2011
Location: Montrose, CO
Posts: 972
Re: 6000 rpm tach anyone...

LostMy 65, the one I used and installed was indeed the 2 inch, P/N 81316. Chevysdominate referenced the original article that he modified and it used a 2 inch tach as well.
Basically, all you use is the guts of the tach, you take it completely apart and use your own blank plate out of your dash and screw the guts to it after slight modification. It fits well. You also end up having to trim down the inner case and the black exterior case to screw on the back.
Also, I wish I would have done a little more research on the decal material on Youtube, dang it. I think it would have been much easier to print on a different material, like that vinyl waterproof inkjet printing paper, but it did work out OK. Still like how mine turned out in the end, but did have to paint the blank plate the Jade Green to get it to look right, as I wrote up.
earl84 is offline   Reply With Quote
Old 08-04-2013, 11:10 AM   #15
jesseo
Registered User
 
jesseo's Avatar
 
Join Date: Dec 2012
Location: Central Point
Posts: 236
Re: 6000 rpm tach anyone...

Very nice. I am going to carquest today to pick one up. I am in the copy and print business and will play with fonts, paper types and font colors to see if I can't get something that works. I've been wanting to do this for a while. I sell decal materials that will work great for these. Need to get the font and color right to reproduce now.
jesseo is offline   Reply With Quote
Old 08-04-2013, 11:40 AM   #16
chevyrestoguy
Registered User
 
chevyrestoguy's Avatar
 
Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
Re: 6000 rpm tach anyone...

Here's a gauge overlay that closely matches the original font. You could probably email the seller and see if he makes that gauge with the correct green font. Shouldn't be a problem at all.
http://www.ebay.com/itm/Premium-Dash...f7d98d&vxp=mtr

Is there any way you could do a step-by-step on how you did this mod? I have been doing a lot of research on using an older Sun tach and modifying it to fit, but like you, I wanted a more realistic RPM range.
__________________
Check out my latest endeavor:
https://roundsixpod.com

My build threads:
'55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512

'64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527
chevyrestoguy is offline   Reply With Quote
Old 08-06-2013, 12:47 AM   #17
Chevysdominate
Registered User
 
Chevysdominate's Avatar
 
Join Date: Jul 2006
Location: Springtucky, Oregon
Posts: 265
Re: 6000 rpm tach anyone...

I would be very interested in a good gauge face that matched the original better. The different font and color are something that still bugs me.

Quote:
Originally Posted by chevyrestoguy View Post
Here's a gauge overlay that closely matches the original font. You could probably email the seller and see if he makes that gauge with the correct green font. Shouldn't be a problem at all.
http://www.ebay.com/itm/Premium-Dash...f7d98d&vxp=mtr

Is there any way you could do a step-by-step on how you did this mod? I have been doing a lot of research on using an older Sun tach and modifying it to fit, but like you, I wanted a more realistic RPM range.
Chevysdominate is offline   Reply With Quote
Old 08-06-2013, 10:56 PM   #18
MARTYZ
Registered User
 
MARTYZ's Avatar
 
Join Date: Mar 2012
Location: Shallow Lake Ontario,Canada
Posts: 201
Re: 6000 rpm tach anyone...

Subscribed, very interested
MARTYZ is offline   Reply With Quote
Old 08-09-2013, 10:10 AM   #19
earl84
Registered User
 
Join Date: Aug 2011
Location: Montrose, CO
Posts: 972
Re: 6000 rpm tach anyone...

So what did you print the gauge face on? Some kind of adhesive backed vinyl or did you have to go to a print shop or something? If you printed it, where did you get the black paper/vinyl/whatever it is?
earl84 is offline   Reply With Quote
Old 08-04-2013, 02:02 PM   #20
jayoldschool
Moderator
 
Join Date: Dec 2012
Location: ON, Canada
Posts: 2,148
Re: 6000 rpm tach anyone...

Quote:
Originally Posted by jesseo View Post
Very nice. I am going to carquest today to pick one up. I am in the copy and print business and will play with fonts, paper types and font colors to see if I can't get something that works. I've been wanting to do this for a while. I sell decal materials that will work great for these. Need to get the font and color right to reproduce now.
Jesseo, can you share the image with us when you're done so we can print it ourselves?

Also, why the 2" version? Is the 3.5" too big?

Last edited by jayoldschool; 08-04-2013 at 02:10 PM.
jayoldschool is offline   Reply With Quote
Old 08-04-2013, 02:47 PM   #21
earl84
Registered User
 
Join Date: Aug 2011
Location: Montrose, CO
Posts: 972
Re: 6000 rpm tach anyone...

Lostmy65, here's a link (hope it shows up right) for replacing the ammeter with a voltmeter. I have my dash apart and have done this, but mine doesn't look as neat as this one.

http://67-72chevytrucks.com/vboard/s...ltmeter&page=2
earl84 is offline   Reply With Quote
Old 08-04-2013, 01:23 PM   #22
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,457
Re: 6000 rpm tach anyone...

I surely want to do this mod.
I also want to do the one where a voltmeter replaces the ammeter.
Posted via Mobile Device
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035
LostMy65 is offline   Reply With Quote
Old 08-09-2013, 12:30 PM   #23
theastronaut
Registered User
 
theastronaut's Avatar
 
Join Date: May 2011
Location: Anderson SC
Posts: 3,867
Re: 6000 rpm tach anyone...

Thanks for posting this, I wanted a tach that went to 10k and looked stock but didn't know how to do it... so I paid to have one made. I like to do stuff myself though so this is good info for the next project!

Here's mine, Jason at Greenback Decal built it from a block-off plate.



theastronaut is offline   Reply With Quote
Old 06-01-2015, 09:25 PM   #24
Grandpa54
Registered User
 
Grandpa54's Avatar
 
Join Date: Mar 2011
Location: Bakersfield Ca.
Posts: 417
Re: 6000 rpm tach anyone...

Quote:
Originally Posted by theastronaut View Post
thanks for posting this, i wanted a tach that went to 10k and looked stock but didn't know how to do it... So i paid to have one made. I like to do stuff myself though so this is good info for the next project!

Here's mine, jason at greenback decal built it from a block-off plate.



theastronaut, do you mind sharing who did your tach
Grandpa54 is offline   Reply With Quote
Old 08-09-2013, 01:08 PM   #25
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: 6000 rpm tach anyone...

astronaut....what tach did you use? I have an extra delete plate and his contact info, so that aspect is easy. Do you have a thread on the 10k tach build?
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:40 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com