UT $1.00 60-63 C10 Cab Cuts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67see10 · 04-28-2020, 09:35 PM

Just got this cab. Not sure if any of you guys may need some cab cuts. Everything is available except for the BBW.

$1.00 plus the cost of shipping to you.

**DPowers** · 04-28-2020, 11:14 PM

Whats radio area look like?

60short · 04-29-2020, 01:44 AM

lower A pillar area, inside the cab about level with the dashboard

67see10 · 04-29-2020, 02:13 AM

Quote:

Originally Posted by DPowers

Whats radio area look like?

Here is a picture

67see10 · 04-29-2020, 02:14 AM

Quote:

Originally Posted by 60short

lower A pillar area, inside the cab about level with the dashboard

Dm me a number and I’ll send you a picture of it

67see10 · 04-29-2020, 02:23 AM

Quote:

Originally Posted by 60short

lower A pillar area, inside the cab about level with the dashboard

Here are some pictures

1960chevypanel · 04-29-2020, 03:44 AM

Hi 67 I'll take the transmission firewall section and the radio delete plate. Thanks.

**DPowers** · 04-29-2020, 09:40 PM

Quote:

Originally Posted by 67see10

Here is a picture

Ill take this section right here please. Shipping to 37843. Let me know how you want paid.

67see10 · 04-29-2020, 09:49 PM

Quote:

Originally Posted by DPowers

Ill take this section right here please. Shipping to 37843. Let me know how you want paid.

I will get it cut on Friday and get you a quote for shipping. Hopefully it will fit a Priority box

**DPowers** · 04-29-2020, 09:53 PM

Quote:

Originally Posted by 67see10

I will get it cut on Friday and get you a quote for shipping. Hopefully it will fit a Priority box

Sounds good..

**DPowers** · 04-29-2020, 10:01 PM

Speaker bracket happen to be still there? Defrost vents?

67see10 · 04-29-2020, 10:13 PM

Quote:

Originally Posted by DPowers

Speaker bracket happen to be still there? Defrost vents?

Not too familiar with the 1st gen c10s. Where would the factory bracket be?

67see10 · 04-29-2020, 10:16 PM

Quote:

Originally Posted by 1960chevypanel

Hi 67 I'll take the transmission firewall section and the radio delete plate. Thanks.

The radio delete has a bullet hole and the transmission section was hacked up

**DPowers** · 04-29-2020, 10:30 PM

Quote:

Originally Posted by 67see10

Not too familiar with the 1st gen c10s. Where would the factory bracket be?

It right under that grate. Held on with a bolt to the cab.

**DPowers** · 04-29-2020, 10:44 PM

Looks something like this to the right.

**cwcarpenter98** · 04-30-2020, 04:01 PM

Any rust through on the upper corners of the windshield area? I need both sides inside and out. Also, if it has the passenger side sun visor bracket, I could use that area as well

3K144J · 04-30-2020, 05:08 PM

I would take a 3 of pieces of the stamped back of the cab highlighted, say about 1 inch on each side of the bends and about 6 inches up, so they can fit in a priority box like Small Box 8 11/16" x 5 7/16" x 1 3/4" $7.65
or Medium Boxes 11 1/4" x 8 3/4" x 6" or 14" x 12" x 3 1/2" $13.20 , thanks Joe

67see10 · 04-30-2020, 07:52 PM

Quote:

Originally Posted by cwcarpenter98

Any rust through on the upper corners of the windshield area? I need both sides inside and out. Also, if it has the passenger side sun visor bracket, I could use that area as well

No passenger side visor

**cwcarpenter98** · 04-30-2020, 08:15 PM

Quote:

Originally Posted by 67see10

No passenger side visor

That's ok. If the rust isn't completely through on either side, I need both of these circled sections. I have not cut into my truck yet to see the extent of the rust, but I know it looks pretty bad from the outside, especially on the passenger side. Just to be on the safe side, if you are willing to cut out the inside section with it, that would be great. I don't need the roof skin though. Seam sealer deteriorated and let water rust out the upper lip areas.

My zip is 30188

Thanks!

*Edit* I will go check on my cab in a couple minutes to see if I need the inside part or not.

67see10 · 04-30-2020, 09:27 PM

I'll start working on the cab cuts tomorrow.

**cwcarpenter98** · 04-30-2020, 11:31 PM

I checked my cab on the inside. It looks ok. It's the outside part that I know has some big holes in it

Brad54 · 05-02-2020, 08:55 PM

How much of the back window are you keeping? The whole panel, or are cuts along the bottom of the cab at the pinch weld available?
I need about two inches high, along the driver's side. It's been a while since I've seen the cab--if you're good with cutting that area, I'll go find out what I need exactly.
-Brad

darkhorse970 · 05-03-2020, 06:58 AM

I’d like to have one side of the dash, for the “hump” portion on top.

darkhorse970 · 05-03-2020, 07:01 AM

Either side of the dash will be fine for my purposes, whichever is the straightest.

lownslw64 · 05-03-2020, 12:27 PM

Can i get this section cut out please? let me know how much to 94513. Thanks

04-28-2020, 09:35 PM	#1
67see10 Registered User Join Date: Jul 2017 Location: FL Born, UT Living Posts: 139	$1.00 60-63 C10 Cab Cuts Just got this cab. Not sure if any of you guys may need some cab cuts. Everything is available except for the BBW. $1.00 plus the cost of shipping to you. Attached Images Last edited by 67see10; 04-29-2020 at 02:26 AM.

04-28-2020, 11:14 PM	#2
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,425	Re: $1.00 60-63 C10 Cab Cuts Whats radio area look like? __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

04-29-2020, 01:44 AM	#3
60short Registered User Join Date: Aug 2017 Location: Santa Barbara, CA Posts: 206	Re: $1.00 60-63 C10 Cab Cuts lower A pillar area, inside the cab about level with the dashboard

04-29-2020, 03:44 AM	#7
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,605	Re: $1.00 60-63 C10 Cab Cuts Hi 67 I'll take the transmission firewall section and the radio delete plate. Thanks.

04-29-2020, 10:01 PM	#11
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,425	Re: $1.00 60-63 C10 Cab Cuts Speaker bracket happen to be still there? Defrost vents? __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

04-29-2020, 10:44 PM	#15
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,425	Re: $1.00 60-63 C10 Cab Cuts Looks something like this to the right. Attached Images __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

04-30-2020, 04:01 PM	#16
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: $1.00 60-63 C10 Cab Cuts Any rust through on the upper corners of the windshield area? I need both sides inside and out. Also, if it has the passenger side sun visor bracket, I could use that area as well __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson Last edited by cwcarpenter98; 04-30-2020 at 06:00 PM.

04-30-2020, 05:08 PM	#17
3K144J Registered User Join Date: Jun 2018 Location: Meridian, Idaho Posts: 14	Re: $1.00 60-63 C10 Cab Cuts I would take a 3 of pieces of the stamped back of the cab highlighted, say about 1 inch on each side of the bends and about 6 inches up, so they can fit in a priority box like Small Box 8 11/16" x 5 7/16" x 1 3/4" $7.65 or Medium Boxes 11 1/4" x 8 3/4" x 6" or 14" x 12" x 3 1/2" $13.20 , thanks Joe Attached Images

04-30-2020, 09:27 PM	#20
67see10 Registered User Join Date: Jul 2017 Location: FL Born, UT Living Posts: 139	Re: $1.00 60-63 C10 Cab Cuts I'll start working on the cab cuts tomorrow.

04-30-2020, 11:31 PM	#21
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: $1.00 60-63 C10 Cab Cuts I checked my cab on the inside. It looks ok. It's the outside part that I know has some big holes in it __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

05-02-2020, 08:55 PM	#22
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,456	Re: $1.00 60-63 C10 Cab Cuts How much of the back window are you keeping? The whole panel, or are cuts along the bottom of the cab at the pinch weld available? I need about two inches high, along the driver's side. It's been a while since I've seen the cab--if you're good with cutting that area, I'll go find out what I need exactly. -Brad __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School

05-03-2020, 06:58 AM	#23
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,103	Re: $1.00 60-63 C10 Cab Cuts I’d like to have one side of the dash, for the “hump” portion on top. __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

05-03-2020, 07:01 AM	#24
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,103	Re: $1.00 60-63 C10 Cab Cuts Either side of the dash will be fine for my purposes, whichever is the straightest. __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

05-03-2020, 12:27 PM	#25
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: $1.00 60-63 C10 Cab Cuts Can i get this section cut out please? let me know how much to 94513. Thanks Attached Images __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.