The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading > 4x4 Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-19-2016, 11:05 PM   #1
michaelk10
Registered User
 
michaelk10's Avatar
 
Join Date: Sep 2016
Location: Denver, CO
Posts: 31
Mk,gk father son k10 build

Hello, thanks to "zoomad" I am starting this build thread. My name is Michael I am 15 and a sophomore at Arapahoe High School in Littleton, CO and thanks to my great dad we are building a 1972 K10. We started cruising through Craigslist and found many 2wd and 4wd trucks from 67-72, I was able to persuade my dad a K-Series truck since it would allow me to get more use out of it than a "hot rod" truck (like the old man wants to build). We were inspired by "zoomad" (Uncle Rob) with his excellent build thread. Rob with his extensive background with all GM products has proven to be a great resource for information with our new build, and our family's "grocery getters." The Pueblo Duran/Zulian family are considered our "southern" blood relatives. Now for the truck. In June of 2016 we found ourselves a 1970 k10 LWB(with a 72 front clip). It currently has the normal 350 engine and TH350 trans. Our plans are to convert it into a SWB and restore it to it's original hugger ornage and white paint job, with a few modern touches. We will be posting photos as we go along with out build.

Excited to be "Building a Better way to See the USA"
michaelk10 is offline   Reply With Quote
Old 09-19-2016, 11:15 PM   #2
michaelk10
Registered User
 
michaelk10's Avatar
 
Join Date: Sep 2016
Location: Denver, CO
Posts: 31
Re: Mk,gk father son k10 build

Here Are Some Photos of our progress
Attached Images
   

Last edited by michaelk10; 09-19-2016 at 11:23 PM.
michaelk10 is offline   Reply With Quote
Old 09-19-2016, 11:28 PM   #3
michaelk10
Registered User
 
michaelk10's Avatar
 
Join Date: Sep 2016
Location: Denver, CO
Posts: 31
Re: Mk,gk father son k10 build

Sorry don't know why the pictures show up that way, haven't been able to figure out a way to flip them yet
michaelk10 is offline   Reply With Quote
Old 09-19-2016, 11:32 PM   #4
michaelk10
Registered User
 
michaelk10's Avatar
 
Join Date: Sep 2016
Location: Denver, CO
Posts: 31
Re: Mk,gk father son k10 build

More Photos
Attached Images
    
michaelk10 is offline   Reply With Quote
Old 09-20-2016, 10:31 AM   #5
swamp rat
Registered User
 
swamp rat's Avatar
 
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
Re: Mk,gk father son k10 build

Flipped your pictures using Paint. Welcome to the forum and good luck!
Attached Images
     
__________________
Mike.

Swamp Rat build thread :
http://67-72chevytrucks.com/vboard/s...d.php?t=595019

72 3/4T 4X4
4" BDS Lift
33" BFG's
swamp rat is offline   Reply With Quote
Old 09-20-2016, 01:21 PM   #6
cmabolt
Registered User
 
cmabolt's Avatar
 
Join Date: Nov 2007
Location: baltimore, maryland
Posts: 617
Re: Mk,gk father son k10 build

Welcome and good luck!

Chris
__________________
Project Reno Build http://67-72chevytrucks.com/vboard/s...d.php?t=392636
Easier to beg forgiveness than ask permission!
cmabolt is offline   Reply With Quote
Old 09-20-2016, 11:12 PM   #7
michaelk10
Registered User
 
michaelk10's Avatar
 
Join Date: Sep 2016
Location: Denver, CO
Posts: 31
Re: Mk,gk father son k10 build

Quote:
Originally Posted by swamp rat View Post
Flipped your pictures using Paint. Welcome to the forum and good luck!
Thanks, I note that for further posts!
michaelk10 is offline   Reply With Quote
Old 09-25-2016, 12:25 AM   #8
Zoomad75
K5Camper
 
Zoomad75's Avatar
 
Join Date: Mar 2004
Location: Pueblo, CO
Posts: 1,513
Re: Mk,gk father son k10 build

Yeah Buddy! Good job Mikey and Dad! Glad you guys joined up. This place is a wealth of knowledge on all things Chevy trucks and it's a great place to keep track of your build.

I've found a ton of info and hopefully helped a few too.

I like the plan of attack we talked about at the res and what you've showed so far. The steel rallies will be a great look and I totally dig the plan with Hugger orange. Can't wait to see progress moving.

I'm flattered with the nice comments you gave in your first post. You guys need any help you know how to get a hold of me.

Oh and since you are playing football I'll cut you some slack on getting stuff done now...But once the season is over you best be getting with it! That is after the homework is done!
__________________
Rob Z.
1975 K5 350/465/205/D44/12b 4" lift on 35's- RIP
1991 K5 8.1L/NV4500/241/D44/14b FWC Camper
Zoomad75 is offline   Reply With Quote
Old 09-25-2016, 10:43 PM   #9
michaelk10
Registered User
 
michaelk10's Avatar
 
Join Date: Sep 2016
Location: Denver, CO
Posts: 31
Re: Mk,gk father son k10 build

Got the tires re-mounted this weekend, got the rally's on there now!
Attached Images
 
michaelk10 is offline   Reply With Quote
Old 09-25-2016, 10:44 PM   #10
michaelk10
Registered User
 
michaelk10's Avatar
 
Join Date: Sep 2016
Location: Denver, CO
Posts: 31
Re: Mk,gk father son k10 build

...
Attached Images
 
michaelk10 is offline   Reply With Quote
Old 09-25-2016, 10:52 PM   #11
El Dorado Jim
Registered User
 
Join Date: Dec 2009
Location: El Dorado Ca
Posts: 3,374
Re: Mk,gk father son k10 build

Nice truck, smart going with a 4x4, I have always preferred them over 2 wheel drives, looking forward to seeing your progress...I love my 72 K20
El Dorado Jim is offline   Reply With Quote
Old 10-05-2016, 10:30 PM   #12
michaelk10
Registered User
 
michaelk10's Avatar
 
Join Date: Sep 2016
Location: Denver, CO
Posts: 31
Re: Mk,gk father son k10 build

...
Attached Images
 

Last edited by michaelk10; 10-05-2016 at 10:38 PM. Reason: rotate pgoto
michaelk10 is offline   Reply With Quote
Old 10-05-2016, 10:40 PM   #13
michaelk10
Registered User
 
michaelk10's Avatar
 
Join Date: Sep 2016
Location: Denver, CO
Posts: 31
Re: Mk,gk father son k10 build

...
Attached Images
 
michaelk10 is offline   Reply With Quote
Old 10-05-2016, 10:47 PM   #14
michaelk10
Registered User
 
michaelk10's Avatar
 
Join Date: Sep 2016
Location: Denver, CO
Posts: 31
Re: Mk,gk father son k10 build

Ordered more part from brothers: new mirrors, door handles, bumper light lenses, side marker sense, cad corner, quarter panels, blazer 20 gallon tank. Also ordered a 2.5" lift from Tuff Country

We were also able to find a seat from a 1991 Sierra off of Craigslist.

Last edited by michaelk10; 10-05-2016 at 10:48 PM. Reason: add word
michaelk10 is offline   Reply With Quote
Old 10-05-2016, 10:51 PM   #15
michaelk10
Registered User
 
michaelk10's Avatar
 
Join Date: Sep 2016
Location: Denver, CO
Posts: 31
Re: Mk,gk father son k10 build

Here is the seat we found, needed new rails on the bottom and new foam, nothing we can't fix, it also help when the guy gives it to you for free!
Attached Images
 
michaelk10 is offline   Reply With Quote
Old 10-06-2016, 11:25 PM   #16
Zoomad75
K5Camper
 
Zoomad75's Avatar
 
Join Date: Mar 2004
Location: Pueblo, CO
Posts: 1,513
Re: Mk,gk father son k10 build

Right On! Brown Santa for the win! I love the tires, great traction off road, good ride on pavement and not loud either! You'll like them.

The lift is a good one. Still should be able to load the mx bike in the back without too much fuss. I bet it nets a little more than 2.5" as your stock springs probably are sagged some.

That seat should look good after you two get done with it.

This is working into a good build. Can't wait to see more!
__________________
Rob Z.
1975 K5 350/465/205/D44/12b 4" lift on 35's- RIP
1991 K5 8.1L/NV4500/241/D44/14b FWC Camper
Zoomad75 is offline   Reply With Quote
Old 02-17-2017, 12:11 AM   #17
michaelk10
Registered User
 
michaelk10's Avatar
 
Join Date: Sep 2016
Location: Denver, CO
Posts: 31
Re: Mk,gk father son k10 build

Haven't posted in a while, was lazy over winter break, and busy with school. But at least there has been progress on the truck! About three months ago we were able to get a serpentine belt system off a 90 Sierra (sorry I don't have pictures)

We also were able to fit our blazer tank, talk about a major headache. We had to cut out the rear brace, bolt in the tank, then weld the brace flush with the end of the frame. This I have pictures for.
michaelk10 is offline   Reply With Quote
Old 02-17-2017, 12:12 AM   #18
michaelk10
Registered User
 
michaelk10's Avatar
 
Join Date: Sep 2016
Location: Denver, CO
Posts: 31
Re: Mk,gk father son k10 build

...
Attached Images
   
michaelk10 is offline   Reply With Quote
Old 02-17-2017, 12:15 AM   #19
michaelk10
Registered User
 
michaelk10's Avatar
 
Join Date: Sep 2016
Location: Denver, CO
Posts: 31
Re: Mk,gk father son k10 build

After another week or so of tinkering in the garage we acquired a Hurst shifter for our transfer case.

Here it is in the truck.
Attached Images
 
michaelk10 is offline   Reply With Quote
Old 02-17-2017, 12:22 AM   #20
michaelk10
Registered User
 
michaelk10's Avatar
 
Join Date: Sep 2016
Location: Denver, CO
Posts: 31
Re: Mk,gk father son k10 build

Then we pulled our cherry picker from the shed and assembled it. Once we did that we were able to jerry rig a brace that allowed us to lift the bed and align it to make sure it will fit on the right holes once we cut the frame.
Attached Images
   
michaelk10 is offline   Reply With Quote
Old 02-17-2017, 12:28 AM   #21
michaelk10
Registered User
 
michaelk10's Avatar
 
Join Date: Sep 2016
Location: Denver, CO
Posts: 31
Re: Mk,gk father son k10 build

Catching up to modern day, roughly two weeks ago we made a huge milestone of installing our hydroboost brake booster. Not only did it make a difference, but I actually don't have to have a 100 pound foot when at stoplight now.
Attached Images
   

Last edited by michaelk10; 02-17-2017 at 12:33 AM.
michaelk10 is offline   Reply With Quote
Old 02-17-2017, 12:47 AM   #22
michaelk10
Registered User
 
michaelk10's Avatar
 
Join Date: Sep 2016
Location: Denver, CO
Posts: 31
Re: Mk,gk father son k10 build

Dug up some photo's of the serpentine setup. Sorry for the awkward angle.
Attached Images
 

Last edited by michaelk10; 02-17-2017 at 12:51 AM. Reason: typo
michaelk10 is offline   Reply With Quote
Old 02-17-2017, 11:36 PM   #23
Zoomad75
K5Camper
 
Zoomad75's Avatar
 
Join Date: Mar 2004
Location: Pueblo, CO
Posts: 1,513
Re: Mk,gk father son k10 build

Well, well, well. Its about friggen time you update the thread. At least you havent been slacking on the truck at least!

Quick question on the serpentine setup.. You did get the reverse rotation water pump and the fan blade for it too, right?

When is the frame cut going to commence?
__________________
Rob Z.
1975 K5 350/465/205/D44/12b 4" lift on 35's- RIP
1991 K5 8.1L/NV4500/241/D44/14b FWC Camper
Zoomad75 is offline   Reply With Quote
Old 02-18-2017, 01:32 AM   #24
michaelk10
Registered User
 
michaelk10's Avatar
 
Join Date: Sep 2016
Location: Denver, CO
Posts: 31
Re: Mk,gk father son k10 build

Quote:
Originally Posted by Zoomad75 View Post
Well, well, well. Its about friggen time you update the thread. At least you havent been slacking on the truck at least!

Quick question on the serpentine setup.. You did get the reverse rotation water pump and the fan blade for it too, right?

When is the frame cut going to commence?
Yes we did get a reverse rotation water pump and fan, but we are looking to find a smaller fan that will fit our shroud. And to answer your frame cut question would be by spring(ish), we are going to finish the work with engine then pull the truck in the garage and cut it.

Last edited by michaelk10; 02-18-2017 at 01:34 AM. Reason: typo
michaelk10 is offline   Reply With Quote
Old 02-18-2017, 08:51 PM   #25
Zoomad75
K5Camper
 
Zoomad75's Avatar
 
Join Date: Mar 2004
Location: Pueblo, CO
Posts: 1,513
Re: Mk,gk father son k10 build

Quote:
Originally Posted by michaelk10 View Post
Yes we did get a reverse rotation water pump and fan, but we are looking to find a smaller fan that will fit our shroud. And to answer your frame cut question would be by spring(ish), we are going to finish the work with engine then pull the truck in the garage and cut it.
Good deal. Glad to hear you got it right for the water pump. It's an easy one to miss. The neighbor next door to us in Detroit made that mistake. Couldn't figure out why the engine ran hot in 10 minutes or less.

Progress is good though! Keep it up!
__________________
Rob Z.
1975 K5 350/465/205/D44/12b 4" lift on 35's- RIP
1991 K5 8.1L/NV4500/241/D44/14b FWC Camper
Zoomad75 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:18 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com