LA 67-72 Burb Rear Clip Cuts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bagd72Chevy · 08-17-2018, 03:21 PM

All Gone. Thanks guys

waylonbud · 08-17-2018, 09:39 PM

Hello,
Interested in the fuel filler "tunnel" if the floor flange is ok. Would like some pics if you can, and shipped to 37303.
Thanks

Bagd72Chevy · 08-17-2018, 09:51 PM

Quote:

Originally Posted by waylonbud

Hello,
Interested in the fuel filler "tunnel" if the floor flange is ok. Would like some pics if you can, and shipped to 37303.
Thanks

I’ll get some pictures. My sons birthday is tomorrow so it may be later in the day or Sunday.
Posted via Mobile Device

waylonbud · 08-17-2018, 09:54 PM

That's ok, no hurry. I'm working all weekend so I can have more money than time, ha.

ddman6 · 08-20-2018, 12:45 PM

Hey Ryan, I'm looking for a decent fuel/vapor separator. I see one in your pictures. The tube ends at the bottom rusted out on mine. I'm interested in this if it's in decent shape. It's the cylinder in the left rear of the burb behind the fuel filler tunnel. It has 3 tubes that go under the vehicle and is really easy to remove. Let me know if it's available and how much.
Thanks

**DaHos** · 08-20-2018, 01:54 PM

Rear sill?

Bagd72Chevy · 08-21-2018, 11:15 AM

Quote:

Originally Posted by waylonbud

That's ok, no hurry. I'm working all weekend so I can have more money than time, ha.

Pictures:

Bagd72Chevy · 08-21-2018, 11:22 AM

Quote:

Originally Posted by ddman6

Hey Ryan, I'm looking for a decent fuel/vapor separator. I see one in your pictures. The tube ends at the bottom rusted out on mine. I'm interested in this if it's in decent shape. It's the cylinder in the left rear of the burb behind the fuel filler tunnel. It has 3 tubes that go under the vehicle and is really easy to remove. Let me know if it's available and how much.
Thanks

I will check it out this afternoon and see if I can get it off.

Thanks,
Ryan

Bagd72Chevy · 08-21-2018, 11:22 AM

Quote:

Originally Posted by DaHos

Rear sill?

If you could draw on my picture where you want it cut I can do that.

-Ryan

waylonbud · 08-21-2018, 12:16 PM

That's much better than what I got. Let me know on shipping and we can go from there. Thanks

Bagd72Chevy · 08-21-2018, 02:56 PM

Quote:

Originally Posted by ddman6

Hey Ryan, I'm looking for a decent fuel/vapor separator. I see one in your pictures. The tube ends at the bottom rusted out on mine. I'm interested in this if it's in decent shape. It's the cylinder in the left rear of the burb behind the fuel filler tunnel. It has 3 tubes that go under the vehicle and is really easy to remove. Let me know if it's available and how much.
Thanks

Brianhill6 · 08-21-2018, 09:43 PM

I could really use the rear tail pan if it’s available still

**richard2717** · 08-22-2018, 07:29 AM

How is the chrome rear sill plate? IF decent I will take it pending shipping costs to 21801

**richard2717** · 09-03-2018, 07:26 AM

Still interested in chrome rear sill plate if available

thanks

Bagd72Chevy · 09-04-2018, 10:05 AM

I will check today or tomorrow. I got caught up running power to my shop. Going to start pulling parts soon.

Bagd72Chevy · 09-12-2018, 09:16 PM

Quote:

Originally Posted by richard2717

Still interested in chrome rear sill plate if available

thanks

You let me know if you think it is decent. $20 + shipping. I have packing tubes to put it in. Its pretty straight, slight bow. Didn't see any dents but has some surface rust.

Bagd72Chevy · 09-12-2018, 09:20 PM

Quote:

Originally Posted by ddman6

Hey Ryan, I'm looking for a decent fuel/vapor separator. I see one in your pictures. The tube ends at the bottom rusted out on mine. I'm interested in this if it's in decent shape. It's the cylinder in the left rear of the burb behind the fuel filler tunnel. It has 3 tubes that go under the vehicle and is really easy to remove. Let me know if it's available and how much.
Thanks

Im not sure if it is useful to you, 2 of the tubes rusted off. $10 + the ride if you want it.

Bagd72Chevy · 09-12-2018, 09:22 PM

Quote:

Originally Posted by waylonbud

That's much better than what I got. Let me know on shipping and we can go from there. Thanks

$20 plus shipping. Send me your zip and I'll get a shipping quote.

Bagd72Chevy · 09-12-2018, 09:25 PM

If anyone is interested in the rear sill, I will remove the entire piece by cutting past the seam in the quarters/taillight area. The quarters and taillight area are bent/wrecked/rusted. The rear sill is in good shape except where water pooled in the middle. Has some heavier surface rust and 2 small holes that I see. $50 + the ride.

**richard2717** · 09-12-2018, 09:26 PM

Quote:

Originally Posted by Bagd72Chevy

You let me know if you think it is decent. $20 + shipping. I have packing tubes to put it in. Its pretty straight, slight bow. Didn't see any dents but has some surface rust.

Let me know shipping cost to 21801 please

**richard2717** · 09-12-2018, 09:28 PM

You don't have to cut the rear sill. If you look from underneath it bolts to the quarter panels with I think 1/2" bolts on each side

Travisarmenta · 09-13-2018, 09:01 AM

I'm interested in the Rear sill, pending pics of underneath it.

and I'd like a pic after chrome strip is removed.

Travis

waylonbud · 09-14-2018, 09:40 AM

Shipping on fuel fill tunnel to 37303

Bagd72Chevy · 09-18-2018, 05:20 PM

Quote:

Originally Posted by waylonbud

Shipping on fuel fill tunnel to 37303

$14 to ship.

Bagd72Chevy · 09-18-2018, 05:21 PM

The rear sill was very rusty underneath. Also the chrome piece was paper thin and started coming apart when I tried to remove it.

08-17-2018, 03:21 PM	#1
Bagd72Chevy C10 Collector Join Date: Oct 2003 Location: Baton Rouge, LA Posts: 415	67-72 Burb Rear Clip Cuts All Gone. Thanks guys __________________ ///Ryan 1972 Chevy C-10-Bagged, Blown LT1, 700r4, Suicide Doors 1967 GMC- SC & Cam'd 4.8, built 4l80, 3200 stall, posi, 4.10 1967 Chevy LWB- 454 and patina 1971 Blazer - Rusty 1968 Crewcab project Last edited by Bagd72Chevy; 10-09-2018 at 02:23 PM.

08-17-2018, 09:39 PM	#2
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: 67-72 Burb Rear Clip Cuts Hello, Interested in the fuel filler "tunnel" if the floor flange is ok. Would like some pics if you can, and shipped to 37303. Thanks

08-17-2018, 09:54 PM	#4
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: 67-72 Burb Rear Clip Cuts That's ok, no hurry. I'm working all weekend so I can have more money than time, ha.

08-20-2018, 12:45 PM	#5
ddman6 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 57	Re: 67-72 Burb Rear Clip Cuts Hey Ryan, I'm looking for a decent fuel/vapor separator. I see one in your pictures. The tube ends at the bottom rusted out on mine. I'm interested in this if it's in decent shape. It's the cylinder in the left rear of the burb behind the fuel filler tunnel. It has 3 tubes that go under the vehicle and is really easy to remove. Let me know if it's available and how much. Thanks

08-20-2018, 01:54 PM	#6
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,853	Re: 67-72 Burb Rear Clip Cuts Rear sill? __________________ 1967 C10 SWB Owner - Rustbelt Restorations

08-21-2018, 12:16 PM	#10
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: 67-72 Burb Rear Clip Cuts That's much better than what I got. Let me know on shipping and we can go from there. Thanks

08-21-2018, 09:43 PM	#12
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 67-72 Burb Rear Clip Cuts I could really use the rear tail pan if it’s available still

08-22-2018, 07:29 AM	#13
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,867	Re: 67-72 Burb Rear Clip Cuts How is the chrome rear sill plate? IF decent I will take it pending shipping costs to 21801 __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

09-03-2018, 07:26 AM	#14
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,867	Re: 67-72 Burb Rear Clip Cuts Still interested in chrome rear sill plate if available thanks __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

09-04-2018, 10:05 AM	#15
Bagd72Chevy C10 Collector Join Date: Oct 2003 Location: Baton Rouge, LA Posts: 415	Re: 67-72 Burb Rear Clip Cuts I will check today or tomorrow. I got caught up running power to my shop. Going to start pulling parts soon. __________________ ///Ryan 1972 Chevy C-10-Bagged, Blown LT1, 700r4, Suicide Doors 1967 GMC- SC & Cam'd 4.8, built 4l80, 3200 stall, posi, 4.10 1967 Chevy LWB- 454 and patina 1971 Blazer - Rusty 1968 Crewcab project

09-12-2018, 09:25 PM	#19
Bagd72Chevy C10 Collector Join Date: Oct 2003 Location: Baton Rouge, LA Posts: 415	Re: 67-72 Burb Rear Clip Cuts If anyone is interested in the rear sill, I will remove the entire piece by cutting past the seam in the quarters/taillight area. The quarters and taillight area are bent/wrecked/rusted. The rear sill is in good shape except where water pooled in the middle. Has some heavier surface rust and 2 small holes that I see. $50 + the ride. __________________ ///Ryan 1972 Chevy C-10-Bagged, Blown LT1, 700r4, Suicide Doors 1967 GMC- SC & Cam'd 4.8, built 4l80, 3200 stall, posi, 4.10 1967 Chevy LWB- 454 and patina 1971 Blazer - Rusty 1968 Crewcab project

09-12-2018, 09:28 PM	#21
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,867	Re: 67-72 Burb Rear Clip Cuts You don't have to cut the rear sill. If you look from underneath it bolts to the quarter panels with I think 1/2" bolts on each side __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

09-13-2018, 09:01 AM	#22
Travisarmenta Registered User Join Date: Oct 2015 Location: Woodbridge Va Posts: 401	Re: 67-72 Burb Rear Clip Cuts I'm interested in the Rear sill, pending pics of underneath it. and I'd like a pic after chrome strip is removed. Travis

09-14-2018, 09:40 AM	#23
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: 67-72 Burb Rear Clip Cuts Shipping on fuel fill tunnel to 37303

09-18-2018, 05:21 PM	#25
Bagd72Chevy C10 Collector Join Date: Oct 2003 Location: Baton Rouge, LA Posts: 415	Re: 67-72 Burb Rear Clip Cuts The rear sill was very rusty underneath. Also the chrome piece was paper thin and started coming apart when I tried to remove it. __________________ ///Ryan 1972 Chevy C-10-Bagged, Blown LT1, 700r4, Suicide Doors 1967 GMC- SC & Cam'd 4.8, built 4l80, 3200 stall, posi, 4.10 1967 Chevy LWB- 454 and patina 1971 Blazer - Rusty 1968 Crewcab project



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.