The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-09-2017, 08:29 PM   #1
Droff
Registered User
 
Join Date: Dec 2016
Location: OKC
Posts: 50
Steering Box now apart....Hmmmm

I have a leaky steering box, the input shaft seal, not the pittman arm seal. I thought I'd just replace the input seal and go from there.
I like having pics but after many searches, I couldn't find anything that was very helpful so I used Tx Firefighter's post on fixing a leaky box, but without the pics.
From reading the posts, it appears that if the shaft is pulled out of the housing, or turned - - - there will be trouble.

I have lifted AND turned the shaft, I just couldn't help myself I guess.

I was having a hard time removing the gland assembly, it would not slide up off the shaft. I fiddled with it too much I suppose, but did get it to finally slide off. I don't have any snap ring pliers, so progress has now stopped for a bit.

So since I lifted, turned and fiddled with the shaft, how hosed am I?
Attached Images
  
Droff is online now   Reply With Quote
Old 11-09-2017, 10:50 PM   #2
saxart
Registered User
 
saxart's Avatar
 
Join Date: Aug 2012
Location: St. Croix River Valley, WI
Posts: 443
Re: Steering Box now apart....Hmmmm

Does this help?

https://www.youtube.com/watch?v=sMyFEpAl5NU

If not, you could always search for other U-tube videos that may help.
__________________
Meet "Old Roy": http://67-72chevytrucks.com/vboard/s...d.php?t=707801
saxart is offline   Reply With Quote
Old 11-09-2017, 10:52 PM   #3
Bigdav160
Registered User
 
Bigdav160's Avatar
 
Join Date: Apr 2011
Location: Klein Texas
Posts: 2,695
Re: Steering Box now apart....Hmmmm

It would take me too long to explain but there are pins that have to align with slots to get the stub shaft to mate to the spool valve and mate to the worm gear. If you can remove the spool and stub shaft without removing the worm gear you should be golden. Check out this thread for decent pics of what I cannot describe:
__________________
My Classics:
'72 K20 Suburban + '65 Dodge Town Wagon
'72 Corvette Roadster +'67 Corvette Roadster
'73 Z-28 Camaro
'63 Ford SWB Uni Pickup
'50 Ford Coupe
Bigdav160 is offline   Reply With Quote
Old 11-14-2017, 07:07 PM   #4
Droff
Registered User
 
Join Date: Dec 2016
Location: OKC
Posts: 50
Re: Steering Box now apart....Hmmmm

Picked up some snap ring pliers, the CORRECT size seal kit for the box and working on getting it back together. Thanks for those links, I've seen the Chris Craft Youtube, it is helpful but he goes quick on some things. The Jeep link has good pics.

My question now is, how far down do I drive in the shaft seal before I put the dust seal on? Does it need to hold the bearing down and keep it from any movement?

It looks like I may have additional issues. The bearing in this piece fell out when I was taking things apart, it didn't need any persuasion. It also falls right back in and the whole thing spins. Everything I've seen on this is that it needs to be tapped out and then set back in, which is not the case.

Would I have a problem with the housing (gland assembly) or just need a new bearing?

Last edited by Droff; 11-15-2017 at 08:49 AM. Reason: Bearing question
Droff is online now   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:36 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com