The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-31-2017, 04:23 PM   #1
JohnJ@RideTech
Registered User
 
JohnJ@RideTech's Avatar
 
Join Date: Jan 2017
Location: Jasper IN
Posts: 266
NEW Air Management System from Ridetech

Name:  RidePro X(2).jpg
Views: 118
Size:  29.4 KB
Name:  RidePro HP(2).jpg
Views: 118
Size:  36.9 KB
RidePRO-X — NEW Digital Air Suspension Control System

Sophisticated pressure and height algorithms tune air spring rates for proper handling and world-class ride quality. A sleek and stealthy 3-position Control Module plugs into your car or truck’s 12V power port (cigarette lighter) and talks to the ECM via RF. Choose
pressure-only (RidePRO-X) or pressure and height (RidePRO-HP) for the ultimate electronic air management system.

FEATURES:

- Stealthy 3-position Control Module communicates via RF.
- “Ride Height On Start” automatic lift and level feature.
- Pressure-based crossload compensation — critical for dynamic driving scenarios such as cornering and panic stops.
- Display and setup via smartphone “App”, laptop or optional dedicated bluetooth Display/Tuner.
- Weatherproof ECM and heavy duty mil-spec connectors.
- All new LevelPRO height measuring sensors.
- Automatic weight compensation.
- RidePRO-X (pressure-based) system is upgradable to RidePRO-HP (pressure and height) system.
- Bluetooth connectivity and smartphone app are included.
- $1300 plus shipping and handling.

RidePro-HP ride height sensors upgrade your existing RidePro-X pressure-based system. The ultimate air suspension management system measures BOTH pressure and ride height. With the addition of RidePro-Hp ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no crossloading. This is especially important for dynamic driving scenarios where quick transitions occur. Examples include high performance driving, sudden directional changes and panic stops. Pressure-only systems are good at handling these load changes, but combined pressure and height systems work best. The complete RidePro-Hp kit is easy to install. The complete RidePro-Hp kit includes: 4 Height Sensors 4 Height sensor linkage kits (with steel linkage rods and rubber rod ends), Group harness, 1/4" sensor bolts w/ Nyloc nuts & flat washers, mounting tabs, Heat shrink tubes and Installation Guide. NOTE: RidePro-Hp sensors can only be used in conjunction with RidePro-X Digital Control System.
- $500 plus shipping and handling.

Check out the article on the NEW RidePro X system on Street Rod Life through the link below.

http://www.streetrodlife.com/tech/air-performance-tips/
__________________
John J.
Sales/Tech
Direct Line: 812-481-4737
Office: 812-482-2932
JJohnson@ridetech.com
Instagram: @ridetech_john

Last edited by JohnJ@RideTech; 10-31-2017 at 04:29 PM.
JohnJ@RideTech is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:07 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com