The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-22-2018, 02:39 PM   #1
botoepfer
Registered User
 
botoepfer's Avatar
 
Join Date: Dec 2017
Location: Prince Frederick/obx
Posts: 106
odometer issue

Hi folks , I went for a nice ride Sat. in Our 63,, The speedo seemed to warm up and register as it should However I got no action from the odometer can this be fixed or repaired?
botoepfer is offline   Reply With Quote
Old 01-24-2018, 10:26 AM   #2
luvbowties
Registered User
 
luvbowties's Avatar
 
Join Date: Feb 2009
Location: southeasternfoothillsofusa
Posts: 1,557
Smile Re: odometer issue

Check our For Sale section. You should find a decently priced used one--likely at a much lower price than a repair shop (you might find) would charge for repairing yours.
Sam
luvbowties is offline   Reply With Quote
Old 01-25-2018, 05:31 PM   #3
cwcarpenter98
Senior Member


 
cwcarpenter98's Avatar
 
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,421
Re: odometer issue

Not sure if this is the exact same issue you were having, but on my 63, the speedo needle started bouncing on me with a range of about 10 mph and the odometer stopped spinning. I replaced the speedo cable, and still had the same problem. Ended up pulling the speedo and odo out and noticed that the plastic gears on the inside were slightly chewed up. My suspicion was that the odometer had stopped spinning causing the speedo to bounce back and forth and not hold constant. I set the odo at a random number and watched it spin till it got to a certain point and stopped spinning. I couldn't figure out why it stopped spinning so I just removed it. It does not have the original engine, so it didn't bother me to not have the odometer in the truck.

Sorry I didn't think to take pictures of it when I took it apart, and the truck is at home while I'm in college so I won't be able to get any pictures of it.
__________________
Christian Carpenter

1963 C10 - Frankentruck 283, 3 speed with overdrive
Overdrive wiring here
1963-ish truck bed trailer - Half-Wit

1981 C10 - Penny 305, th350

1995 Dodge Dakota Sport

"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
cwcarpenter98 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:47 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com