LS1 and Heating Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jferrante · 02-06-2018, 10:45 PM

Whats the easiest way to run heat in a 60-66 with an LS1? Can you use the factory heater core? Didnt see much on this.
Thanks

**mongocanfly** · 02-06-2018, 10:49 PM

on my 81 I kept my stock heater....works just fine...

rmvlt1100 · 02-06-2018, 11:10 PM

I used the factory heater core on my 1965, no issues at all.

Jferrante · 02-07-2018, 10:25 AM

Quote:

Originally Posted by rmvlt1100

I used the factory heater core on my 1965, no issues at all.

thanks guys - was hoping this was the answer. Do you have pictures of the routing of your hoses? Would appreciate it.

rmvlt1100 · 02-07-2018, 07:30 PM

I hope the pictures are there. The top picture shows the heater box with the hoses. The second picture, I replaced the slip on fittings with an AN/pipe thread adapter. I used 1/2 and 3/4 inch heater hoses. I cannot find any other pictures that shows the heater core hooked up. I used a female AN to push lock fitting for the connections to the motor.

Hope this helps.

[IMG]

[/IMG]

[IMG]

[/IMG]

Jferrante · 02-07-2018, 09:14 PM

fantastic thanks

02-06-2018, 10:45 PM	#1
Jferrante Registered User Join Date: Jan 2015 Location: Arlington VA Posts: 359	LS1 and Heating Question Whats the easiest way to run heat in a 60-66 with an LS1? Can you use the factory heater core? Didnt see much on this. Thanks

02-06-2018, 10:49 PM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,583	Re: LS1 and Heating Question on my 81 I kept my stock heater....works just fine... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

02-06-2018, 11:10 PM	#3
rmvlt1100 Registered User Join Date: Jan 2012 Location: Crest Hill, IL Posts: 337	Re: LS1 and Heating Question I used the factory heater core on my 1965, no issues at all. __________________ This is my Build A 5.3L 1965 C-10 Fleetside http://67-72chevytrucks.com/vboard/s...d.php?t=502100

02-07-2018, 07:30 PM	#5
rmvlt1100 Registered User Join Date: Jan 2012 Location: Crest Hill, IL Posts: 337	Re: LS1 and Heating Question I hope the pictures are there. The top picture shows the heater box with the hoses. The second picture, I replaced the slip on fittings with an AN/pipe thread adapter. I used 1/2 and 3/4 inch heater hoses. I cannot find any other pictures that shows the heater core hooked up. I used a female AN to push lock fitting for the connections to the motor. Hope this helps. [IMG][/IMG] [IMG][/IMG] __________________ This is my Build A 5.3L 1965 C-10 Fleetside http://67-72chevytrucks.com/vboard/s...d.php?t=502100

02-07-2018, 09:14 PM	#6
Jferrante Registered User Join Date: Jan 2015 Location: Arlington VA Posts: 359	Re: LS1 and Heating Question fantastic thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.