NJ 1970 blazer parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JUNKY · 03-03-2010, 09:32 PM

bucket seats,with sliders, 150.00 sold to lks dcvn
rear seat,black,nice driver 150.00 sold
roll bar 150.00
rear hatch,has most parts 150.00 sold
double wall top,nice 100.00

no shipping can pick up in new jersey
I can deliver to englishtown or carlisle swap meet for 10 bucks

money order or cash I don't have paypal yet. thanks TOM

**lks dcvn** · 03-03-2010, 09:54 PM

Interested in the bucket seats for $150 - do you have any pix of the backs by chance?

Can you take a measurement of the widths below and post it up...I want to be sure that these will fit on my Blazer floor bolt holes...

Thx.

**72gmguy** · 03-03-2010, 11:23 PM

I will get in line for the seats and the rollbar if it is a 67-72 style bar

JUNKY · 03-04-2010, 07:18 AM

lks dcvn - sorry no shipping on these parts i will still get measurement if you want.

72gmguy-your up on roll bar,give me a day for lks to respond about seats.
roll bar seems to be correct for 67-72.

please reply in tread.

JUNKY · 03-04-2010, 07:55 AM

more pics

**72gmguy** · 03-04-2010, 09:13 AM

I checked around and I think you have a 73 and up rollbar.

**lks dcvn** · 03-04-2010, 10:26 AM

Would still like pix of the back of the seats and the measurements before committing to buy or pass.

If they are what I am looking for I will arrange shipping on my own to get these to Ohio.

Thanks.

Huck · 03-04-2010, 11:09 AM

The pass bucket seat looks like the wrong release---are you sure these are original 69-72 factory seats? Looks like they could be 73 & ^

**Gary 70 Jimmy** · 03-04-2010, 11:33 AM

Quote:

Originally Posted by Huck

The pass bucket seat looks like the wrong release---are you sure these are original 69-72 factory seats? Looks like they could be 73 & ^

My 70 jimmy has the same release.

JUNKY · 03-04-2010, 03:17 PM

I'm not a blazer guy,just took for granted the roll bar belonged to that truck.the seats are correct i;ve been told,they bolt into the factory holes.

lks dcvn here are more pics for ya.driver side has crack inback plastic.
other side has small cracks.

also have measurement ,center of hole to center of hole.
front to back is 13 in.
side to side-front is 17.5 in. rear is 16.5 hope this helps.

**lks dcvn** · 03-05-2010, 09:57 AM

I will take the seats - send me a PM with payment details.

Thx.

JUNKY · 03-06-2010, 07:34 AM

seats sold to lks pending payment.

**lks dcvn** · 03-09-2010, 08:58 AM

Payment sent for the bucket seats and brackets -

- Shoot me a PM when it arrives so I know it got to you.

Thx.

JUNKY · 03-15-2010, 09:23 PM

ttt

mup123 · 03-16-2010, 08:04 PM

Quote:

Originally Posted by JUNKY

ttt

Are you selling the fuel tank?

JUNKY · 03-19-2010, 06:17 AM

No,sorry fuel tank is no good.

JUNKY · 03-29-2010, 06:20 PM

ttt

JimmyFloyd · 04-01-2010, 12:34 AM

might be interested in the hatch. Could pick up at carlisle.

JUNKY · 04-01-2010, 09:22 PM

thats cool,let me know,i'll be there on sat.only
thanks tom

bigrigpardo · 04-06-2010, 09:10 PM

hey interested in the hatch. r there any cracks?

sylfred · 04-25-2010, 12:46 PM

what is the condition of the grill,looking to put a 1970 grill in a 72 blazer

JUNKY · 04-25-2010, 03:19 PM

The grill is no good,it is dented by R head light & by the L.
thanks for asking TOM

sylfred · 04-27-2010, 09:29 PM

also looking for a blazer windshield frame

reefer55 · 05-02-2010, 02:52 PM

I'm interested in the hatch but I'm up in canada any chance you could check fedex frieght for delivery to T5W2A5
Sorry I did not see the sold behind the hatch thanks any way.

JUNKY · 05-02-2010, 09:18 PM

windshied frame no good.
thanks tom

03-03-2010, 09:32 PM	#1
JUNKY Registered User Join Date: May 2009 Location: Manalapan N.J. Posts: 107	1970 blazer parts bucket seats,with sliders, 150.00 sold to lks dcvn rear seat,black,nice driver 150.00 sold roll bar 150.00 rear hatch,has most parts 150.00 sold double wall top,nice 100.00 no shipping can pick up in new jersey I can deliver to englishtown or carlisle swap meet for 10 bucks money order or cash I don't have paypal yet. thanks TOM Attached Images Last edited by JUNKY; 04-25-2010 at 03:25 PM. Reason: MORE PICS

03-03-2010, 09:54 PM	#2
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,338	Re: 1970 blazer parts Interested in the bucket seats for $150 - do you have any pix of the backs by chance? Can you take a measurement of the widths below and post it up...I want to be sure that these will fit on my Blazer floor bolt holes... Thx. Attached Images Last edited by lks dcvn; 03-03-2010 at 10:08 PM. Reason: forgot my pic

03-03-2010, 11:23 PM	#3
72gmguy Senior Member Join Date: Mar 2009 Location: Brigantine NJ Posts: 819	Re: 1970 blazer parts I will get in line for the seats and the rollbar if it is a 67-72 style bar

03-04-2010, 07:18 AM	#4
JUNKY Registered User Join Date: May 2009 Location: Manalapan N.J. Posts: 107	Re: 1970 blazer parts lks dcvn - sorry no shipping on these parts i will still get measurement if you want. 72gmguy-your up on roll bar,give me a day for lks to respond about seats. roll bar seems to be correct for 67-72. please reply in tread.

03-04-2010, 07:55 AM	#5
JUNKY Registered User Join Date: May 2009 Location: Manalapan N.J. Posts: 107	Re: 1970 blazer parts more pics Attached Images

03-04-2010, 09:13 AM	#6
72gmguy Senior Member Join Date: Mar 2009 Location: Brigantine NJ Posts: 819	Re: 1970 blazer parts I checked around and I think you have a 73 and up rollbar.

03-04-2010, 10:26 AM	#7
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,338	Re: 1970 blazer parts Would still like pix of the back of the seats and the measurements before committing to buy or pass. If they are what I am looking for I will arrange shipping on my own to get these to Ohio. Thanks.

03-04-2010, 11:09 AM	#8
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Re: 1970 blazer parts The pass bucket seat looks like the wrong release---are you sure these are original 69-72 factory seats? Looks like they could be 73 & ^

03-04-2010, 03:17 PM	#10
JUNKY Registered User Join Date: May 2009 Location: Manalapan N.J. Posts: 107	Re: 1970 blazer parts I'm not a blazer guy,just took for granted the roll bar belonged to that truck.the seats are correct i;ve been told,they bolt into the factory holes. lks dcvn here are more pics for ya.driver side has crack inback plastic. other side has small cracks. also have measurement ,center of hole to center of hole. front to back is 13 in. side to side-front is 17.5 in. rear is 16.5 hope this helps. Attached Images

03-05-2010, 09:57 AM	#11
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,338	Re: 1970 blazer parts I will take the seats - send me a PM with payment details. Thx.

03-06-2010, 07:34 AM	#12
JUNKY Registered User Join Date: May 2009 Location: Manalapan N.J. Posts: 107	Re: 1970 blazer parts seats sold to lks pending payment.

03-09-2010, 08:58 AM	#13
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,338	Re: 1970 blazer parts Payment sent for the bucket seats and brackets - - Shoot me a PM when it arrives so I know it got to you. Thx.

03-15-2010, 09:23 PM	#14
JUNKY Registered User Join Date: May 2009 Location: Manalapan N.J. Posts: 107	Re: 1970 blazer parts ttt

03-19-2010, 06:17 AM	#16
JUNKY Registered User Join Date: May 2009 Location: Manalapan N.J. Posts: 107	Re: 1970 blazer parts No,sorry fuel tank is no good.

03-29-2010, 06:20 PM	#17
JUNKY Registered User Join Date: May 2009 Location: Manalapan N.J. Posts: 107	Re: 1970 blazer parts ttt



Register or Log In To remove these advertisements.

04-01-2010, 12:34 AM	#18
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: 1970 blazer parts might be interested in the hatch. Could pick up at carlisle. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

04-01-2010, 09:22 PM	#19
JUNKY Registered User Join Date: May 2009 Location: Manalapan N.J. Posts: 107	Re: 1970 blazer parts thats cool,let me know,i'll be there on sat.only thanks tom

04-06-2010, 09:10 PM	#20
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: 1970 blazer parts hey interested in the hatch. r there any cracks?

04-25-2010, 12:46 PM	#21
sylfred Registered User Join Date: Apr 2010 Location: roanoke rapids,n.c. Posts: 26	Re: 1970 blazer parts what is the condition of the grill,looking to put a 1970 grill in a 72 blazer

04-25-2010, 03:19 PM	#22
JUNKY Registered User Join Date: May 2009 Location: Manalapan N.J. Posts: 107	Re: 1970 blazer parts The grill is no good,it is dented by R head light & by the L. thanks for asking TOM Last edited by JUNKY; 04-25-2010 at 03:20 PM.

04-27-2010, 09:29 PM	#23
sylfred Registered User Join Date: Apr 2010 Location: roanoke rapids,n.c. Posts: 26	Re: 1970 blazer parts also looking for a blazer windshield frame

05-02-2010, 02:52 PM	#24
reefer55 Registered User Join Date: Oct 2008 Location: Edmonton, alberta, canada Posts: 189	Re: 1970 blazer parts I'm interested in the hatch but I'm up in canada any chance you could check fedex frieght for delivery to T5W2A5 Sorry I did not see the sold behind the hatch thanks any way. Last edited by reefer55; 05-02-2010 at 08:26 PM.

05-02-2010, 09:18 PM	#25
JUNKY Registered User Join Date: May 2009 Location: Manalapan N.J. Posts: 107	Re: 1970 blazer parts windshied frame no good. thanks tom

Register or Log In To remove these advertisements.