GA 70-71 Valve Cover Decal - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Subdude59** · 04-15-2020, 09:25 PM

Quote:

Originally Posted by IronCanine

I'm out right now. I will post here when I do another run. Sorry.

I’ll get in line for two sets of valve cover decals when you have them in stock. PM me when available. Thanks. Subdude59

**IronCanine** · 06-16-2020, 08:43 AM

After a long while, I've got a small batch in. matt_field, Tripmiester, Subdude59 and rhanghian are up first. LMK.

**71blksuper4x4** · 06-16-2020, 09:51 AM

I would like one of the final designs of the 1971 engine decal, and would like a final design of your blazer jacking instructions please. Trevor

**IronCanine** · 06-16-2020, 11:08 AM

Quote:

Originally Posted by 71blksuper4x4

I would like one of the final designs of the 1971 engine decal, and would like a final design of your blazer jacking instructions please. Trevor

PM sent.

**Subdude59** · 06-16-2020, 11:23 AM

I’d like a set of script lettering decal and Blazer jack instructions. Please PM the total amount due including shipping. Thx

Quote:

Originally Posted by IronCanine

After a long while, I've got a small batch in. matt_field, Tripmiester, Subdude59 and rhanghian are up first. LMK.

**1970cstblazer** · 03-07-2021, 02:27 PM

Interested in both the valve cover and jacking instructions for a 1970 Blazer 350.

**AZ Chev** · 03-07-2021, 03:23 PM

If still available, I would like two sets of the final valve cover decals.

Thanks

**IronCanine** · 03-07-2021, 10:47 PM

Hi guys...I keep these at work. I'll check tomorrow and let you know. I think I've got you covered, but I know I'm running low. A lot of these end up being sold through PM requests only and don't show up in this thread.

**AZ Chev** · 03-07-2021, 11:07 PM

Did you have transfer case shift stickers made as well for the glove box door? Mine is a 70 with NP 205. If correct, and if you have any, would like to get a couple of those as well.

**WETOWM** · 03-07-2021, 11:12 PM

I would be in for 1 of the final ones

**IronCanine** · 03-08-2021, 12:39 AM

Quote:

Originally Posted by AZ Chev

Did you have transfer case shift stickers made as well for the glove box door? Mine is a 70 with NP 205. If correct, and if you have any, would like to get a couple of those as well.

I did make a shift "decal" for the 69 K10...but 1)It was only correct for that truck (we copied the 69 graphics and layout, but changed the pattern to match the 205 we put in the truck) and 2)It was a magnet and could be easily removed

You can see it pictured below in the wrapper...I may have some spares, I'd have to look.

Also pictured is the original decal on our Blazer. It was a 1970 built in St Louis. I have seen more than one version of this decal. However, it is the same decal as my Fremont K20 (also pictured...poorly). And I will have to have to reproduce it in the coming months for that build. I will be making a decal, not a magnet, for that one. If you're in no hurry, I'll be happy to get you one then.

**IronCanine** · 03-08-2021, 12:40 AM

Quote:

Originally Posted by WETOWM

I would be in for 1 of the final ones

I'll see what I've got and let you know tomorrow.

**AZ Chev** · 03-08-2021, 01:30 AM

Quote:

Originally Posted by IronCanine

I did make a shift "decal" for the 69 K10...but 1)It was only correct for that truck (we copied the 69 graphics and layout, but changed the pattern to match the 205 we put in the truck) and 2)It was a magnet and could be easily removed

You can see it pictured below in the wrapper...I may have some spares, I'd have to look.

Also pictured is the original decal on our Blazer. It was a 1970 built in St Louis. I have seen more than one version of this decal. However, it is the same decal as my Fremont K20 (also pictured...poorly). And I will have to have to reproduce it in the coming months for that build. I will be making a decal, not a magnet, for that one. If you're in no hurry, I'll be happy to get you one then.

Mine has an original decal, just not perfect. I’ll get a picture of it. Not sure what years had what, but this one has an original NP205

**IronCanine** · 03-08-2021, 08:49 AM

Quote:

Originally Posted by AZ Chev

Mine has an original decal, just not perfect. I’ll get a picture of it. Not sure what years had what, but this one has an original NP205

NP205 is 1970 for sure. Just letting you know that if your decal matches the original 1970 decal that I posted above, I will reproduce that for my own build. But I won't do it for a few months.

**IronCanine** · 03-08-2021, 09:09 AM

Quote:

Originally Posted by 1970cstblazer

Interested in both the valve cover and jacking instructions for a 1970 Blazer 350.

Quote:

Originally Posted by AZ Chev

If still available, I would like two sets of the final valve cover decals.

Thanks

Quote:

Originally Posted by WETOWM

I would be in for 1 of the final ones

PMs sent.

**1970cstblazer** · 03-16-2021, 12:11 PM

Quick shipping, and a high quality product!

**AZ Chev** · 03-16-2021, 01:39 PM

Received my decals, they look fantastic. Thanks.

**IronCanine** · 03-16-2021, 01:51 PM

Glad they made it safe guys. Thanks.

Cake · 03-25-2021, 06:47 PM

Do you have final 8 350 for sale?

**IronCanine** · 03-25-2021, 08:20 PM

Quote:

Originally Posted by Cake

Do you have final 8 350 for sale?

I think so. But I've sold a few lately. I keep them at work. I'll let you know when I get there tomorrow.

MattyBs71 · 02-09-2022, 11:22 PM

Quote:

Originally Posted by IronCanine

I think so. But I've sold a few lately. I keep them at work. I'll let you know when I get there tomorrow.

If you have any on hand could I get one final version? Or in line for when you do? PM if so. Thank you!

**IronCanine** · 02-10-2022, 08:43 AM

I've got some. PM sent.

**Johnl48** · 02-10-2022, 09:49 PM

I'll take a final one also

Azcarman1956 · 02-10-2022, 10:57 PM

I’d like one also if you have enough

**IronCanine** · 02-11-2022, 08:43 AM

Quote:

Originally Posted by Johnl48

I'll take a final one also

Quote:

Originally Posted by Azcarman1956

I’d like one also if you have enough

PMs sent.

06-16-2020, 08:43 AM	#152
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,535	Re: 70-71 Valve Cover Decal After a long while, I've got a small batch in. matt_field, Tripmiester, Subdude59 and rhanghian are up first. LMK. __________________ 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

06-16-2020, 09:51 AM	#153
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,148	Re: 70-71 Valve Cover Decal I would like one of the final designs of the 1971 engine decal, and would like a final design of your blazer jacking instructions please. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

03-07-2021, 02:27 PM	#156
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,277	Re: 70-71 Valve Cover Decal Interested in both the valve cover and jacking instructions for a 1970 Blazer 350. __________________ 1970 K/5 Blazer CST 4WD, Bronze, 93k ACT. miles, 350, 4 speed, positraction, 16.5" x 8.25" wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration in progress... 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 41k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 60k miles, 3.6, 8L45, 3.23 LS, 18" wheels

03-07-2021, 03:23 PM	#157
AZ Chev Senior Member Join Date: Jul 2017 Location: Hereford Posts: 442	Re: 70-71 Valve Cover Decal If still available, I would like two sets of the final valve cover decals. Thanks

03-07-2021, 10:47 PM	#158
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,535	Re: 70-71 Valve Cover Decal Hi guys...I keep these at work. I'll check tomorrow and let you know. I think I've got you covered, but I know I'm running low. A lot of these end up being sold through PM requests only and don't show up in this thread. __________________ 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

03-07-2021, 11:07 PM	#159
AZ Chev Senior Member Join Date: Jul 2017 Location: Hereford Posts: 442	Re: 70-71 Valve Cover Decal Did you have transfer case shift stickers made as well for the glove box door? Mine is a 70 with NP 205. If correct, and if you have any, would like to get a couple of those as well.

03-07-2021, 11:12 PM	#160
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,096	Re: 70-71 Valve Cover Decal I would be in for 1 of the final ones

03-16-2021, 12:11 PM	#166
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,277	Re: 70-71 Valve Cover Decal Quick shipping, and a high quality product! __________________ 1970 K/5 Blazer CST 4WD, Bronze, 93k ACT. miles, 350, 4 speed, positraction, 16.5" x 8.25" wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration in progress... 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 41k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 60k miles, 3.6, 8L45, 3.23 LS, 18" wheels

03-16-2021, 01:39 PM	#167
AZ Chev Senior Member Join Date: Jul 2017 Location: Hereford Posts: 442	Re: 70-71 Valve Cover Decal Received my decals, they look fantastic. Thanks.

03-16-2021, 01:51 PM	#168
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,535	Re: 70-71 Valve Cover Decal Glad they made it safe guys. Thanks. __________________ 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

03-25-2021, 06:47 PM	#169
Cake Registered User Join Date: Apr 2019 Location: Dayton Ohio Posts: 14	Re: 70-71 Valve Cover Decal Do you have final 8 350 for sale?

02-10-2022, 08:43 AM	#172
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,535	Re: 70-71 Valve Cover Decal I've got some. PM sent. __________________ 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

02-10-2022, 09:49 PM	#173
Johnl48 Senior Member Join Date: Jun 2021 Location: West milford nj Posts: 324	Re: 70-71 Valve Cover Decal I'll take a final one also

02-10-2022, 10:57 PM	#174
Azcarman1956 Registered User Join Date: Dec 2016 Location: Rimrock AZ Posts: 7	Re: 70-71 Valve Cover Decal I’d like one also if you have enough



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.