The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-01-2010, 12:36 AM   #1
4DSEVEN
Registered User
 
4DSEVEN's Avatar
 
Join Date: Jan 2009
Location: Ontario Canada
Posts: 239
Shaved door handles where to start?

Can anyone recommend a good kit and the steps / process, also what I need to buy to do this. I believe that I will also need door poppers? Are bear claws mandatory etc.?

Help is greatly appreciated.

Mark
4DSEVEN is offline   Reply With Quote
Old 04-01-2010, 01:31 AM   #2
drivea55
Registered User
 
drivea55's Avatar
 
Join Date: Oct 2009
Location: Monson,MA
Posts: 503
Re: Shaved door handles where to start?

A good kit will come with door poppers... IMO, they are a must a long with a remote hard wired button to pop it in case your remote dies. Usually mounted inside a wheel well or rocker panel.
__________________
current project;
1950 GMC "Junk Yard Dawg"
http://67-72chevytrucks.com/vboard/s...d.php?t=635960

___________________________________________

SOLD to "ONEBADFIVEFIVE"
http://67-72chevytrucks.com/vboard/s...d.php?t=436406
drivea55 is offline   Reply With Quote
Old 04-01-2010, 12:01 PM   #3
Scottshotrods
Registered User
 
Join Date: Oct 2008
Location: oxnard ca
Posts: 2,201
Re: Shaved door handles where to start?

Quote:
Originally Posted by 4DSEVEN View Post
Can anyone recommend a good kit and the steps / process, also what I need to buy to do this. I believe that I will also need door poppers? Are bear claws mandatory etc.?

Help is greatly appreciated.

Mark
Mark,
We have complete power door kits in stock that come with a remote
and poppers $189.00
Bear claws will allow the door to open up easier and latch alot better
complete kit with latches and strikers and install panels $100.00we have
in stock.Keep in mind this will require welding to install the latches.
There is a bolt in kit on the market that is a bolt on for the latches.
This kit cost alot more money.

all parts I have mentioned we have in stock if you are intrested e-mail
or p/m me justin@scottshotrods.com
Justin
www.scottshotrods.com
Scottshotrods is offline   Reply With Quote
Old 04-01-2010, 05:16 PM   #4
Dan in Pasadena
Senior Member

 
Dan in Pasadena's Avatar
 
Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,331
Re: Shaved door handles where to start?

Quote:
Originally Posted by drivea55 View Post
A good kit will come with door poppers... IMO, they are a must a long with a remote hard wired button to pop it in case your remote dies. Usually mounted inside a wheel well or rocker panel.
In MY opinion, forget the hardwired button. Install a hidden release cable. If the battery dies (and they always do eventually) a hard wired button won't help you.
Dan in Pasadena is offline   Reply With Quote
Old 04-01-2010, 05:25 PM   #5
blitz'd
vintage car junkie
 
blitz'd's Avatar
 
Join Date: Aug 2004
Location: DFW
Posts: 217
Re: Shaved door handles where to start?

Quote:
Originally Posted by Dan in Pasadena View Post
In MY opinion, forget the hardwired button. Install a hidden release cable. If the battery dies (and they always do eventually) a hard wired button won't help you.
Actually both are pretty handy to have. I wouldnt worry about the remote dying but the solenoids do go out eventually and truck batteries die. I drove a shaved truck for 2 years daily. I didnt have either swich or cable, I got pretty good at breaking in through the wing window though.
__________________
1950 chevy truck, s10 swap, bagged, v8, 18s
My build: http://67-72chevytrucks.com/vboard/s...d.php?t=392761
blitz'd is offline   Reply With Quote
Old 04-03-2010, 12:02 AM   #6
floridasteve
Registered User
 
floridasteve's Avatar
 
Join Date: Jul 2008
Location: Boynton Beach, Fl
Posts: 103
Re: Shaved door handles where to start?

I was told that with the bear claw installed you don't need the door poppers. The claw kind of "kicks" the door open a bit for you to grab the door and open it. I installed the bear claw latches on mine and shaved the door handles. Right now I am in the middle of body work and have the doors off but opening the mechanism seemed to be fine without the poppers installed.
__________________
One day I am going to finish this project!
1949 Chevy 1/2 ton
floridasteve is offline   Reply With Quote
Old 04-04-2010, 04:39 PM   #7
4DSEVEN
Registered User
 
4DSEVEN's Avatar
 
Join Date: Jan 2009
Location: Ontario Canada
Posts: 239
Re: Shaved door handles where to start?

Quote:
Originally Posted by Scottshotrods View Post
Mark,
We have complete power door kits in stock that come with a remote
and poppers $189.00
Bear claws will allow the door to open up easier and latch alot better
complete kit with latches and strikers and install panels $100.00we have
in stock.Keep in mind this will require welding to install the latches.
There is a bolt in kit on the market that is a bolt on for the latches.
This kit cost alot more money.

all parts I have mentioned we have in stock if you are intrested e-mail
or p/m me justin@scottshotrods.com
Justin
www.scottshotrods.com
PM sent.
4DSEVEN is offline   Reply With Quote
Old 05-07-2010, 05:03 AM   #8
4DSEVEN
Registered User
 
4DSEVEN's Avatar
 
Join Date: Jan 2009
Location: Ontario Canada
Posts: 239
Re: Shaved door handles where to start?

The kit came in today Justin.

Might have a few questions for the install when I get to it. Jeff was very good to deal with also.

Thanks for the GREAT service.

Mark
4DSEVEN is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:18 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com