CRGRS 66 – Winter Build Thread - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lower50's · 04-04-2016, 06:30 PM

Well Craig after we had 24hrs of heavy rain last week if your basement has a leak it would show. Good luck on fixing it all up.

CRGRS 66 · 07-05-2016, 11:30 AM

Camping in upstate NY earlier in the month, picked up some goods @ D-S Auto, Alan Groves Alternator bracket, 3 groove crank pulley, power steering pulley, oil filter adapter and filter. Accessory drive mocked up, just need to dismantle and paint a few items, reassemble, then time to put the engine back in. Also recently purchased an American Auto Wire classic update harness, and a laundry list of other bits and pieces. Should be able to devote some time to the truck starting in a couple of weeks

Johnny_Lamebridge · 07-05-2016, 12:14 PM

Craig, new parts are always fun. It'll be nice to see you back at it.

Where did you camp, Finger Lakes area?

markeb01 · 07-05-2016, 12:48 PM

Great purchase on the Alan Grove parts. I have their stuff on my truck and it works perfectly and lasts indefinitely. Good luck!

Ta2Don · 07-05-2016, 02:00 PM

Craigerr, glad to see you resurface and getting some truck time in...

**clemdaddy** · 07-05-2016, 03:32 PM

spent a good deal of time in upstate NY... mainly the 1000 Island area. got friends there, beautiful place. also got cousins in Rochester and Syracuse, yeah yeah, I'm a yankee living in the South. Please just don't say anything...

good to have you back on the forum, Craig.

CRGRS 66 · 07-05-2016, 03:41 PM

Quote:

Originally Posted by Johnny_Lamebridge

Craig, new parts are always fun. It'll be nice to see you back at it.

Where did you camp, Finger Lakes area?

Letchworth State Park, B E A utifal park, they call themselves the Grand Canyon of the east, but it is a Gorge similar to the Niagara Gorge with the Genesee river running through it... and yes, it is in the finger lakes area

Quote:

Originally Posted by markeb01

Great purchase on the Alan Grove parts. I have their stuff on my truck and it works perfectly and lasts indefinitely. Good luck!

Wish I had gone with alan groves on the power steering pump bracket, the one I go is okay, but I had to shim it out to align it with the crank pulley.

Quote:

Originally Posted by Ta2Don

Craigerr, glad to see you resurface and getting some truck time in...

One more weekend of yard work then on to assembly work

Quote:

Originally Posted by clemdaddy

spent a good deal of time in upstate NY... mainly the 1000 Island area. got friends there, beautiful place. also got cousins in Rochester and Syracuse, yeah yeah, I'm a yankee living in the South. Please just don't say anything...

good to have you back on the forum, Craig.

You're secret is safe with me... I won't tell a soul

lower50's · 07-07-2016, 10:25 AM

Good to see you getting at it again buddy.

CRGRS 66 · 01-21-2017, 04:56 PM

I have been making small bits of progress here and there, and have run into an issue with my clutch linkage. I poached these pictures form McMurphy`s thread. I believe I am having the same issue. Stud threads into the boss nicely, but the linkage was nearly impossible to install, and just does not look right. Engine is a basic 350 crate engine. I don`t have any fab skills, hoping Mike reads this and kept the dimensions for his little bracket...

rustbucket66 · 01-21-2017, 05:21 PM

Good to see you surface, and back into your project. I will be following your thread.

lower50's · 01-30-2017, 02:31 PM

If you need help let me know.

CRGRS 66 · 04-22-2018, 08:56 PM

Have been making some progress lately.
Power steering plumbing done.

CRGRS 66 · 04-22-2018, 08:58 PM

Fuel line from pump to carb (stainless tube) done... well almost done, just waiting for the fuel filter to arrive, it will go inline right in front of the carb

CRGRS 66 · 04-22-2018, 08:59 PM

and the pics

CRGRS 66 · 04-22-2018, 09:01 PM

Rear brakes done, did I get them right????

CRGRS 66 · 04-22-2018, 09:03 PM

Rear brake lines bent up and installed, passenger side

CRGRS 66 · 04-22-2018, 09:05 PM

Driver side

CRGRS 66 · 04-22-2018, 09:10 PM

couple more of the driver side, really gives the brain a work out... Hey, don't forget to throw that nut on before you make your first bend...

**The Rocknrod** · 04-22-2018, 11:06 PM

That fuel line looks sweet, your very good at that.

**Captainfab** · 04-23-2018, 12:00 AM

Nice work on the tube bending

**Palf70Step** · 04-23-2018, 07:37 AM

....Way better with that tubing bender than I am. Great looking work.

CRGRS 66 · 04-23-2018, 07:43 AM

Thanks guys, did I put the brake hardware back together correctly?
We do some pretty intricate tube bending for some OEM customers, I will post some pictures.

lower50's · 04-23-2018, 08:26 AM

Hi Craig Glad to see your still at it!! Love the fuel line. As far as I see the brakes seem to be correct.

CRGRS 66 · 04-23-2018, 08:30 AM

Don't have great pictures handy, but this will give you an idea.

lower50's · 05-23-2018, 03:57 PM

Get the boys at your work to bend those lines up?

04-04-2016, 06:30 PM	#326
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: CRGRS 66 – Winter Build Thread Well Craig after we had 24hrs of heavy rain last week if your basement has a leak it would show. Good luck on fixing it all up. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

07-05-2016, 11:30 AM	#327
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Re: CRGRS 66 – Winter Build Thread Camping in upstate NY earlier in the month, picked up some goods @ D-S Auto, Alan Groves Alternator bracket, 3 groove crank pulley, power steering pulley, oil filter adapter and filter. Accessory drive mocked up, just need to dismantle and paint a few items, reassemble, then time to put the engine back in. Also recently purchased an American Auto Wire classic update harness, and a laundry list of other bits and pieces. Should be able to devote some time to the truck starting in a couple of weeks Attached Images __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709

07-05-2016, 12:14 PM	#328
Johnny_Lamebridge Registered User Join Date: Mar 2014 Location: Cambridge, Ontario Posts: 507	Re: CRGRS 66 – Winter Build Thread Craig, new parts are always fun. It'll be nice to see you back at it. Where did you camp, Finger Lakes area? __________________ * My 63 C10 SWB Fleetside (converted to BBW): http://67-72chevytrucks.com/vboard/s...58#post6851558 @johnny_lamebridge on Instagram

07-05-2016, 12:48 PM	#329
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: CRGRS 66 – Winter Build Thread Great purchase on the Alan Grove parts. I have their stuff on my truck and it works perfectly and lasts indefinitely. Good luck! __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

07-05-2016, 02:00 PM	#330
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: CRGRS 66 – Winter Build Thread Craigerr, glad to see you resurface and getting some truck time in... __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

07-05-2016, 03:32 PM	#331
clemdaddy Senior Member Join Date: Oct 2009 Location: Fayetteville, Arkansas Posts: 1,923	Re: CRGRS 66 – Winter Build Thread spent a good deal of time in upstate NY... mainly the 1000 Island area. got friends there, beautiful place. also got cousins in Rochester and Syracuse, yeah yeah, I'm a yankee living in the South. Please just don't say anything... good to have you back on the forum, Craig.

07-07-2016, 10:25 AM	#333
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: CRGRS 66 – Winter Build Thread Good to see you getting at it again buddy. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

01-21-2017, 04:56 PM	#334
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Re: CRGRS 66 – Winter Build Thread I have been making small bits of progress here and there, and have run into an issue with my clutch linkage. I poached these pictures form McMurphy`s thread. I believe I am having the same issue. Stud threads into the boss nicely, but the linkage was nearly impossible to install, and just does not look right. Engine is a basic 350 crate engine. I don`t have any fab skills, hoping Mike reads this and kept the dimensions for his little bracket... Attached Images __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709

01-21-2017, 05:21 PM	#335
rustbucket66 Registered User Join Date: Dec 2010 Location: Strathmore, Alberta Posts: 470	Re: CRGRS 66 – Winter Build Thread Good to see you surface, and back into your project. I will be following your thread.

01-30-2017, 02:31 PM	#336
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: CRGRS 66 – Winter Build Thread If you need help let me know. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

04-22-2018, 08:56 PM	#337
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Re: CRGRS 66 – Winter Build Thread Have been making some progress lately. Power steering plumbing done. Attached Images __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709

04-22-2018, 08:58 PM	#338
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Re: CRGRS 66 – Winter Build Thread Fuel line from pump to carb (stainless tube) done... well almost done, just waiting for the fuel filter to arrive, it will go inline right in front of the carb __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709

04-22-2018, 08:59 PM	#339
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Re: CRGRS 66 – Winter Build Thread and the pics Attached Images __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709

04-22-2018, 09:01 PM	#340
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Re: CRGRS 66 – Winter Build Thread Rear brakes done, did I get them right???? Attached Images __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709

04-22-2018, 09:03 PM	#341
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Re: CRGRS 66 – Winter Build Thread Rear brake lines bent up and installed, passenger side Attached Images __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709



Register or Log In To remove these advertisements.

04-22-2018, 09:05 PM	#342
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Re: CRGRS 66 – Winter Build Thread Driver side Attached Images __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709

04-22-2018, 09:10 PM	#343
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Re: CRGRS 66 – Winter Build Thread couple more of the driver side, really gives the brain a work out... Hey, don't forget to throw that nut on before you make your first bend... Attached Images __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709

04-22-2018, 11:06 PM	#344
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: CRGRS 66 – Winter Build Thread That fuel line looks sweet, your very good at that. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-23-2018, 12:00 AM	#345
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: CRGRS 66 – Winter Build Thread Nice work on the tube bending __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-23-2018, 07:37 AM	#346
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,613	Re: CRGRS 66 – Winter Build Thread ....Way better with that tubing bender than I am. Great looking work. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

04-23-2018, 07:43 AM	#347
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Re: CRGRS 66 – Winter Build Thread Thanks guys, did I put the brake hardware back together correctly? We do some pretty intricate tube bending for some OEM customers, I will post some pictures. __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709

04-23-2018, 08:26 AM	#348
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: CRGRS 66 – Winter Build Thread Hi Craig Glad to see your still at it!! Love the fuel line. As far as I see the brakes seem to be correct. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

04-23-2018, 08:30 AM	#349
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Re: CRGRS 66 – Winter Build Thread Don't have great pictures handy, but this will give you an idea. Attached Images __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709

05-23-2018, 03:57 PM	#350
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: CRGRS 66 – Winter Build Thread Get the boys at your work to bend those lines up? __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

Register or Log In To remove these advertisements.