Mongos 81 c30 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OutlawDrifter · 04-18-2018, 10:20 PM

Top notch job! I also like the fuel pressure gauge tucked up in there.

That pickup turned out super clean!

**mongocanfly** · 05-03-2018, 07:21 PM

thanks outlaw!!!

StorminNorman · 05-04-2018, 08:15 PM

That's a nice build. Interested in how you routed the fuel lines ?

**mongocanfly** · 05-04-2018, 09:19 PM

thanks stormin....I just ran the lines inside the frame rails and came up the back of the engine...I used all -6an on it..you can see it coming over the coil cover in this pic

StorminNorman · 05-04-2018, 11:38 PM

Yes that's the area I was interested in . On mine Its a bit tight there with headers and the column shift linkage. How close is the hose to the headers ? what fuel reg are you using ?

Dads79GMC · 05-05-2018, 12:10 AM

Nice clean swap. I like the valve cover.....cover, is that what you'd call them. Anyway, they do a great job of giving you that clean look. Mike

**mongocanfly** · 05-05-2018, 12:22 AM

thanks Mike....
Norman, I have the fuel line fastened to the firewall where it starts to angle back...its a good piece away from the headers..i don't have the column shifter in my way though

**mongocanfly** · 06-14-2018, 09:46 PM

while going thru some old pics I found the only remaining pics of the old c30 from when I first got it..these were pics of the bed I pulled off...

**Advanced Design** · 06-16-2018, 12:31 AM

Wow, that was a serious bed!

**mongocanfly** · 06-16-2018, 01:34 AM

t was a monster for sure...and heavy....

**mongocanfly** · 06-20-2018, 09:18 PM

clutch linkage pics for macdaddy

**mongocanfly** · 04-09-2019, 02:06 PM

Added a grill emblem today ...found something close on Ebay.(https://www.ebay.com/itm/NEW-CHEVROL...edirect=mobile).. thanks to help from the board...had to trim the edges a good bit and add 3M emblem tape but it looks much better than a painted emblem reccess...
Before and after

OutlawDrifter · 04-09-2019, 03:59 PM

Looks good!

**mongocanfly** · 04-09-2019, 09:42 PM

Thanks outlaw!!

**Advanced Design** · 04-10-2019, 08:40 AM

Great looking truck there Greg!

**mongocanfly** · 04-10-2019, 07:06 PM

thanks Doug!

**mongocanfly** · 04-10-2019, 07:07 PM

thanks Doug!.... any progress on the burb?

**Advanced Design** · 04-11-2019, 04:04 PM

Quote:

Originally Posted by mongocanfly

thanks Doug!.... any progress on the burb?

A little. I have been focusing on getting the 72 Burb ready for HRPT long haul after taking a couple weeks off to decompress. Plus getting the mowers etc ready to go for this season.....gotta get cracking on it though!

skyphix · 04-11-2019, 04:18 PM

Cool truck and it looks great! I always wondered how well a 6.0/4L80E combo would work in a 3/4 - 1 ton square body. 16mpg is pretty awesome for a 1t dually!

**mongocanfly** · 04-12-2019, 10:35 AM

Thanks skyphix!....
That 16 is only obtainable if you keep your foot out of it..haha

fordguy40 · 04-12-2019, 05:11 PM

Nice job on the swap and the paint...helluva work truck you've got there.

**mongocanfly** · 04-12-2019, 05:24 PM

Thanks fordguy!...

**mongocanfly** · 06-14-2019, 11:17 PM

Ran my truck across the scales today..it came in at 5680lb...

Ford Assassin · 01-05-2020, 11:19 PM

What year NV4500? Mine is the early version with the external slave hanging off the passenger side of the bellhousing.

**mongocanfly** · 01-05-2020, 11:27 PM

it is a 98 I believe...its the later one with the bolt on shift tower...but my bellhousing is advance adapters..with the clutch fork on the drivers side

04-18-2018, 10:20 PM	#26
OutlawDrifter Registered User Join Date: Aug 2012 Location: Northeast KS Posts: 1,775	Re: Mongos 81 c30 Top notch job! I also like the fuel pressure gauge tucked up in there. That pickup turned out super clean! __________________ 1999 GMC Suburban K2500 SLT, 454/4L80E 1991 Z/28, 6.0L/T56 1949 GMC 250, S10 Frame, 6.0L/4L80E Instagram @aceshighspeedshop

05-03-2018, 07:21 PM	#27
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,579	Re: Mongos 81 c30 thanks outlaw!!! __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

05-04-2018, 08:15 PM	#28
StorminNorman Registered User Join Date: Jul 2017 Location: Victoria BC Posts: 71	Re: Mongos 81 c30 That's a nice build. Interested in how you routed the fuel lines ? __________________ 81 short step.

05-04-2018, 09:19 PM	#29
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,579	Re: Mongos 81 c30 thanks stormin....I just ran the lines inside the frame rails and came up the back of the engine...I used all -6an on it..you can see it coming over the coil cover in this pic Attached Images __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver Last edited by mongocanfly; 05-04-2018 at 09:27 PM.

05-04-2018, 11:38 PM	#30
StorminNorman Registered User Join Date: Jul 2017 Location: Victoria BC Posts: 71	Re: Mongos 81 c30 Yes that's the area I was interested in . On mine Its a bit tight there with headers and the column shift linkage. How close is the hose to the headers ? what fuel reg are you using ? __________________ 81 short step.

05-05-2018, 12:10 AM	#31
Dads79GMC Registered User Join Date: Feb 2008 Location: Des Moines, Iowa Posts: 1,237	Re: Mongos 81 c30 Nice clean swap. I like the valve cover.....cover, is that what you'd call them. Anyway, they do a great job of giving you that clean look. Mike __________________ Instagram @HomeBuiltC10s Dads 79 GMC Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=642929 1978 Silverado Build http://67-72chevytrucks.com/vboard/s...d.php?t=756016

05-05-2018, 12:22 AM	#32
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,579	Re: Mongos 81 c30 thanks Mike.... Norman, I have the fuel line fastened to the firewall where it starts to angle back...its a good piece away from the headers..i don't have the column shifter in my way though __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

06-14-2018, 09:46 PM	#33
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,579	Re: Mongos 81 c30 while going thru some old pics I found the only remaining pics of the old c30 from when I first got it..these were pics of the bed I pulled off... Attached Images __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

06-16-2018, 12:31 AM	#34
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: Mongos 81 c30 Wow, that was a serious bed! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

06-16-2018, 01:34 AM	#35
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,579	Re: Mongos 81 c30 t was a monster for sure...and heavy.... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

06-20-2018, 09:18 PM	#36
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,579	Re: Mongos 81 c30 clutch linkage pics for macdaddy Attached Images __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

04-09-2019, 02:06 PM	#37
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,579	Re: Mongos 81 c30 Added a grill emblem today ...found something close on Ebay.(https://www.ebay.com/itm/NEW-CHEVROL...edirect=mobile).. thanks to help from the board...had to trim the edges a good bit and add 3M emblem tape but it looks much better than a painted emblem reccess... Before and after Attached Images __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

04-09-2019, 03:59 PM	#38
OutlawDrifter Registered User Join Date: Aug 2012 Location: Northeast KS Posts: 1,775	Re: Mongos 81 c30 Looks good! __________________ 1999 GMC Suburban K2500 SLT, 454/4L80E 1991 Z/28, 6.0L/T56 1949 GMC 250, S10 Frame, 6.0L/4L80E Instagram @aceshighspeedshop

04-09-2019, 09:42 PM	#39
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,579	Re: Mongos 81 c30 Thanks outlaw!! __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

04-10-2019, 08:40 AM	#40
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: Mongos 81 c30 Great looking truck there Greg! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap



Register or Log In To remove these advertisements.

04-10-2019, 07:06 PM	#41
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,579	Re: Mongos 81 c30 thanks Doug! __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

04-10-2019, 07:07 PM	#42
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,579	Re: Mongos 81 c30 thanks Doug!.... any progress on the burb? __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

04-11-2019, 04:18 PM	#44
skyphix Registered User Join Date: Sep 2018 Location: Hampden, ME Posts: 406	Re: Mongos 81 c30 Cool truck and it looks great! I always wondered how well a 6.0/4L80E combo would work in a 3/4 - 1 ton square body. 16mpg is pretty awesome for a 1t dually! __________________ Eric 1980 C10 SWB 2003 Chevy Suburban 2500 LT

04-12-2019, 10:35 AM	#45
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,579	Re: Mongos 81 c30 Thanks skyphix!.... That 16 is only obtainable if you keep your foot out of it..haha __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

04-12-2019, 05:11 PM	#46
fordguy40 Registered User Join Date: Feb 2018 Location: Montclair, CA Posts: 149	Re: Mongos 81 c30 Nice job on the swap and the paint...helluva work truck you've got there. __________________ A few Fords and a couple of Chevys

04-12-2019, 05:24 PM	#47
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,579	Re: Mongos 81 c30 Thanks fordguy!... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

06-14-2019, 11:17 PM	#48
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,579	Re: Mongos 81 c30 Ran my truck across the scales today..it came in at 5680lb... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

01-05-2020, 11:19 PM	#49
Ford Assassin Registered User Join Date: Jun 2008 Location: Jackson, Ca. Posts: 674	Re: Mongos 81 c30 What year NV4500? Mine is the early version with the external slave hanging off the passenger side of the bellhousing. __________________ Cable -K5 Blazer 2wd: 6.0 LQ4, 7875 Turbo, Tick Stage II Turbo Cam, Built 4L80e, RevMax Billet 3600, 9.5" 14 Bolt -Chevy 3+3 Crew Cab Dually: Cummins 12v P-Pump Swap, Compound Turbos, A2W Intercooler, NV4500HD, 4wd conversion, Radius Arms, Coilovers, Crossover Steering, etc Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=803608

01-05-2020, 11:27 PM	#50
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,579	Re: Mongos 81 c30 it is a 98 I believe...its the later one with the bolt on shift tower...but my bellhousing is advance adapters..with the clutch fork on the drivers side __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

Register or Log In To remove these advertisements.