Eric's 1966 Turbo 6.0 build - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 08-10-2017, 09:37 AM

Cool build. Tagging in to follow.

cooperhw · 08-10-2017, 10:43 AM

Cool build. I'll tag along. I been wanting to do a turbo for quite a while now, but have held off mainly because I never done one and little gunshy.
Keep us posted.

bocephus79 · 11-17-2017, 09:09 PM

Back Again. Getting the Exhaust finished before I move on to other stuff. This is the first build I'm having painted so I'm super worried about drilling holes in anything AFTER paint. Going to basically assemble everything and blow it back apart for final paint stuff. Got the Wastegate mounted and Recirculated it into the downpipe.

bocephus79 · 11-17-2017, 09:10 PM

west side. about 10 minutes south of downtown. @Dpowers

rmvlt1100 · 11-26-2017, 11:20 PM

Quote:

Originally Posted by bocephus79

Attachment 1669746

Attachment 1669747

You have a nice build going. Will keep watching. I am in the process of putting a turbo on my 1965 C-10. Can you tell the brand and a part number for the intercooler that you used. I thought using an air to water style cause I didn't think a air to air would fit behind the grill in front of the radiator. Keep up the good work.

bocephus79 · 01-07-2018, 05:52 PM

Winter is car wash busy season here so the poor truck has been neglected! Lots of bed parts ordered and odds and ends I'll get some pictures of soon. I recently had Rendered Rides work up what I'm going for..and i'm beyond happy with the outcome.

sixty4bigwindow · 01-08-2018, 03:34 PM

Just stumbled across this build, LOVE it! These turbo builds always intrigue me. Probably just going to do an N/A LS in my 64, but DEFINITELY going to build a turbo LS in something down the road! Love the rig so far dude, keep it up

slimjim66 · 01-08-2018, 03:52 PM

subscribed

bocephus79 · 01-15-2018, 11:19 AM

Got some time to finish the High Hump install and throttle assembly.

My new favorite things are Riv-nuts! No more welding nuts to stuff! Whole high hump is removable. I also took an S10 throttle bracket and pedal and it fit close to factory ( with some bending). The stock 6.0 throttle cable plugged into the hole in the firewall like it was meant to be there.

bocephus79 · 01-15-2018, 04:04 PM

Quote:

Originally Posted by sixty4bigwindow

Just stumbled across this build, LOVE it! These turbo builds always intrigue me. Probably just going to do an N/A LS in my 64, but DEFINITELY going to build a turbo LS in something down the road! Love the rig so far dude, keep it up

Thanks, this is my first ever turbo anything. So the learning curve is steep. Also the most complete " restoration" as well. Nothing like swinging for the fences....

sixty4bigwindow · 01-15-2018, 07:42 PM

Quote:

Originally Posted by bocephus79

Thanks, this is my first ever turbo anything. So the learning curve is steep. Also the most complete " restoration" as well. Nothing like swinging for the fences....

Love it. Mine is my first build too. Hoping I dont screw anything up too bad haha. Keep it coming on the pics!

Beatrice · 01-23-2018, 12:50 PM

what size is the new intercooler?

JamieGallien · 01-23-2018, 01:15 PM

Looking good. I plan to add a turbo once I get mine together and running NA. Subbing.

66C10LB · 01-23-2018, 01:55 PM

Liking where you are going with this...subscribed. Impressive amount of work you had to do on that cab!

bocephus79 · 02-08-2018, 07:52 PM

The weather has been perfect for carwashing! being insanely busy and installing some new equipment has soaked up almost all of my time. I did get my bedsides delivered and the sheet metal work is DONE! Also have my under dash fuse panel installed for the engine harness I'll attach some pictures I have so far, and some carwash pictures because why not.

Notch1988 · 02-11-2018, 03:15 PM

Keep up the good work

bocephus79 · 03-07-2018, 10:20 AM

My budget Home Depot compressor wasn't happy with the start of body work. So I bit the bullet and upgraded. It's safe the say this will be the last time I buy a compressor in my life! 80 gallon 5HP. 25 CFM. PLumbed it into a refrigerated dryer ( my air tools are happy!).

bocephus79 · 03-07-2018, 10:24 AM

I really wanted to do a column shift for my 4l80e. I spent a ton of time calling ididit, flaming river etc to see if it was possible. I got 3 different answers. No, Maybe, And it might, but not shift through all the gears. So i went with a Ratchet B!tch shifter from Kilduff. I think I'm gonna be happy. The left stick shifts like a normal shifter, while the one on the right ratchets one gear at a time.

bocephus79 · 03-07-2018, 10:27 AM

Bed came off and I built a somewhat sketchy stand so I can work on it. Took the truck outside and wire wheeled and sandblasted everything I could on the frame. I sprayed it with SEM rust converter and it's waiting for paint now

bocephus79 · 03-07-2018, 10:32 AM

Mocked up the boyds tank with the A1000 pump. USed some existing holes in the frame, and welded Nuts and washers inside the frame rail. now the tank can be installed or removed from the bottom easily.

BR3W CITY · 03-07-2018, 12:07 PM

I thought I was the only other person who ever ran a kilduff shifter lol. Boss Kilduff is a trip man, cool guy, but very much an enthusiast-run biz. I like that twin stick model! I've run his Twister shifter for around 5 years and haven't had an issue. Plus no one ever knows what it is.

Rusty63 · 03-07-2018, 12:55 PM

love the progress so far,nice work!

Notch1988 · 03-07-2018, 01:05 PM

Great progress. I love the Kilduff shifter, I plan to pull the trigger on a lightning rod shifter in the next few weeks.

rmvlt1100 · 03-13-2018, 08:55 PM

Love the progress your making. I was looking for a new shifter, think I found one. (Maybe like the one you have) I was wondering what in tank fuel pump you are using? Thanks in advance for the info. Have a good night.

bocephus79 · 04-18-2018, 08:18 AM

Quote:

Originally Posted by rmvlt1100

Love the progress your making. I was looking for a new shifter, think I found one. (Maybe like the one you have) I was wondering what in tank fuel pump you are using? Thanks in advance for the info. Have a good night.

Mine is a boyd's ank with an A-1000 pump. I didn't want fueling issues with the turbo. for a NA Ls swap you could get away with way smaller

08-10-2017, 09:37 AM	#26
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,907	Re: Eric's 1966 Turbo 6.0 build Cool build. Tagging in to follow. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

08-10-2017, 10:43 AM	#27
cooperhw Registered User Join Date: Oct 2014 Location: Mesa AZ (Near Phoenix) Posts: 2,302	Re: Eric's 1966 Turbo 6.0 build Cool build. I'll tag along. I been wanting to do a turbo for quite a while now, but have held off mainly because I never done one and little gunshy. Keep us posted. __________________ "Life is too short to drive a boring vehicle". Later, Wayne

11-17-2017, 09:09 PM	#28
bocephus79 Registered User Join Date: Jul 2016 Location: Cleveland Ohio Posts: 67	Re: Eric's 1966 Turbo 6.0 build Back Again. Getting the Exhaust finished before I move on to other stuff. This is the first build I'm having painted so I'm super worried about drilling holes in anything AFTER paint. Going to basically assemble everything and blow it back apart for final paint stuff. Got the Wastegate mounted and Recirculated it into the downpipe. Attached Images

11-17-2017, 09:10 PM	#29
bocephus79 Registered User Join Date: Jul 2016 Location: Cleveland Ohio Posts: 67	Re: Eric's 1966 Turbo 6.0 build west side. about 10 minutes south of downtown. @Dpowers

01-07-2018, 05:52 PM	#31
bocephus79 Registered User Join Date: Jul 2016 Location: Cleveland Ohio Posts: 67	Re: Eric's 1966 Turbo 6.0 build Winter is car wash busy season here so the poor truck has been neglected! Lots of bed parts ordered and odds and ends I'll get some pictures of soon. I recently had Rendered Rides work up what I'm going for..and i'm beyond happy with the outcome. Attached Images

01-08-2018, 03:34 PM	#32
sixty4bigwindow Registered User Join Date: Feb 2016 Location: BACK in Southern Oregon... Don't ask Posts: 151	Re: Eric's 1966 Turbo 6.0 build Just stumbled across this build, LOVE it! These turbo builds always intrigue me. Probably just going to do an N/A LS in my 64, but DEFINITELY going to build a turbo LS in something down the road! Love the rig so far dude, keep it up __________________ Been a crazy 2018. Moved twice, back HOME in Oregon. Now to put everything back together, including the truck... My build thread for "Rocket" - http://67-72chevytrucks.com/vboard/s...d.php?t=753023

01-08-2018, 03:52 PM	#33
slimjim66 Registered User Join Date: Nov 2017 Location: Toronto Posts: 158	Re: Eric's 1966 Turbo 6.0 build subscribed

01-15-2018, 11:19 AM	#34
bocephus79 Registered User Join Date: Jul 2016 Location: Cleveland Ohio Posts: 67	Re: Eric's 1966 Turbo 6.0 build Got some time to finish the High Hump install and throttle assembly. My new favorite things are Riv-nuts! No more welding nuts to stuff! Whole high hump is removable. I also took an S10 throttle bracket and pedal and it fit close to factory ( with some bending). The stock 6.0 throttle cable plugged into the hole in the firewall like it was meant to be there. Attached Images

01-23-2018, 12:50 PM	#37
Beatrice Registered User Join Date: Dec 2017 Location: Ohio Posts: 36	Re: Eric's 1966 Turbo 6.0 build what size is the new intercooler?

01-23-2018, 01:15 PM	#38
JamieGallien Registered User Join Date: Apr 2013 Location: Athens, Al Posts: 241	Re: Eric's 1966 Turbo 6.0 build Looking good. I plan to add a turbo once I get mine together and running NA. Subbing. __________________ 1965 Chevy C10 SWB Step (Family Restoration Project) http://67-72chevytrucks.com/vboard/s....php?p=6043410 1972 Chevy C10 LWB Fleet (factory auto/l6) http://67-72chevytrucks.com/vboard/s...d.php?t=580342

01-23-2018, 01:55 PM	#39
66C10LB Registered User Join Date: Jul 2016 Location: West Kelowna, BC, Canada Posts: 204	Re: Eric's 1966 Turbo 6.0 build Liking where you are going with this...subscribed. Impressive amount of work you had to do on that cab!

02-08-2018, 07:52 PM	#40
bocephus79 Registered User Join Date: Jul 2016 Location: Cleveland Ohio Posts: 67	Re: Eric's 1966 Turbo 6.0 build The weather has been perfect for carwashing! being insanely busy and installing some new equipment has soaked up almost all of my time. I did get my bedsides delivered and the sheet metal work is DONE! Also have my under dash fuse panel installed for the engine harness I'll attach some pictures I have so far, and some carwash pictures because why not. Attached Images

02-11-2018, 03:15 PM	#41
Notch1988 Registered User Join Date: Aug 2009 Location: Lacombe, Alberta Posts: 335	Re: Eric's 1966 Turbo 6.0 build Keep up the good work __________________ 66 GMC swb dropmember accuair Link to my build: My GMC Project

03-07-2018, 10:20 AM	#42
bocephus79 Registered User Join Date: Jul 2016 Location: Cleveland Ohio Posts: 67	Re: Eric's 1966 Turbo 6.0 build My budget Home Depot compressor wasn't happy with the start of body work. So I bit the bullet and upgraded. It's safe the say this will be the last time I buy a compressor in my life! 80 gallon 5HP. 25 CFM. PLumbed it into a refrigerated dryer ( my air tools are happy!). Attached Images

03-07-2018, 10:24 AM	#43
bocephus79 Registered User Join Date: Jul 2016 Location: Cleveland Ohio Posts: 67	Re: Eric's 1966 Turbo 6.0 build I really wanted to do a column shift for my 4l80e. I spent a ton of time calling ididit, flaming river etc to see if it was possible. I got 3 different answers. No, Maybe, And it might, but not shift through all the gears. So i went with a Ratchet B!tch shifter from Kilduff. I think I'm gonna be happy. The left stick shifts like a normal shifter, while the one on the right ratchets one gear at a time. Attached Images



Register or Log In To remove these advertisements.

03-07-2018, 10:27 AM	#44
bocephus79 Registered User Join Date: Jul 2016 Location: Cleveland Ohio Posts: 67	Re: Eric's 1966 Turbo 6.0 build Bed came off and I built a somewhat sketchy stand so I can work on it. Took the truck outside and wire wheeled and sandblasted everything I could on the frame. I sprayed it with SEM rust converter and it's waiting for paint now Attached Images

03-07-2018, 10:32 AM	#45
bocephus79 Registered User Join Date: Jul 2016 Location: Cleveland Ohio Posts: 67	Re: Eric's 1966 Turbo 6.0 build Mocked up the boyds tank with the A1000 pump. USed some existing holes in the frame, and welded Nuts and washers inside the frame rail. now the tank can be installed or removed from the bottom easily. Attached Images

03-07-2018, 12:07 PM	#46
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Eric's 1966 Turbo 6.0 build I thought I was the only other person who ever ran a kilduff shifter lol. Boss Kilduff is a trip man, cool guy, but very much an enthusiast-run biz. I like that twin stick model! I've run his Twister shifter for around 5 years and haven't had an issue. Plus no one ever knows what it is. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

03-07-2018, 12:55 PM	#47
Rusty63 Registered User Join Date: Sep 2017 Location: Kincardine,Ontario Posts: 80	Re: Eric's 1966 Turbo 6.0 build love the progress so far,nice work!

03-07-2018, 01:05 PM	#48
Notch1988 Registered User Join Date: Aug 2009 Location: Lacombe, Alberta Posts: 335	Re: Eric's 1966 Turbo 6.0 build Great progress. I love the Kilduff shifter, I plan to pull the trigger on a lightning rod shifter in the next few weeks. __________________ 66 GMC swb dropmember accuair Link to my build: My GMC Project

03-13-2018, 08:55 PM	#49
rmvlt1100 Registered User Join Date: Jan 2012 Location: Crest Hill, IL Posts: 337	Re: Eric's 1966 Turbo 6.0 build Love the progress your making. I was looking for a new shifter, think I found one. (Maybe like the one you have) I was wondering what in tank fuel pump you are using? Thanks in advance for the info. Have a good night. __________________ This is my Build A 5.3L 1965 C-10 Fleetside http://67-72chevytrucks.com/vboard/s...d.php?t=502100

Register or Log In To remove these advertisements.