The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Paint & Bodywork

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-03-2018, 02:09 PM   #1
LBJ
Registered User
 
LBJ's Avatar
 
Join Date: Jun 2007
Location: TEXAS
Posts: 305
How to take apart Glove Box Latch? - Solved!

For my 77 Bonanza, I bought a new glove box from LMC. Thought it would take maybe 5 minutes to replace. Now, 30 minutes later, still stumped on how to remove the door catch. It's not a locking type, just a 1/4 turn latch. Any hints? Thanks, LBJ

I went back out to the shop and took another look at the latch. It HAD to come out the front side somehow so I inserted a small diameter wire in the tiny hole in the front side and kept working with it. Finally, after much tugging and pulling, the latch mechanism came out. So, just takes some determination. On putting it back together, you need to thread in the keeper-nut very smoothly to keep from cross threading it. Then, you need to find a suitable steel bar to turn the keeper-nut as tight as it will go. Once that is in place, just reinsert the latch mechanism with the wire still inside until it re-engages and you are set. But, you do not have to take the little roll pin out to get it apart. That would set-free at least 3 springs that you'd never get back inside the latch!
Attached Images
 

Last edited by LBJ; 08-03-2018 at 04:13 PM.
LBJ is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:55 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com