67 GMC Stepside PROJECT: TEXAS FARM TRUCK

[Oregon 1967 GMC]

here I go...glad to be here, appreciate all the help. While in the Army at Fort Hood, Texas circa 1991, Just getting started really and any suggestions are welcome.

[junksaver]

Looks like it has lots of potential. It's a lot better than some of them I have had. Good luck with your build.

[Elliot949]

My best suggestion for you is to sit down with a piece of paper and write down EXACTLY what your vision is for your truck... Remember there is no wrong decision... Do not let anybody influence your build... Suggestions are one thing and decisions about those suggestions are always good... There are alot of guys on here with ALOT of GREAT information and I would encourage you to read as many build post as well as the message boards you will get alot of information there... Some great guys on here to get parts from are Cash3481 (deals alot in GMC), Teeitup, and some others... There are a few to definitely steer away from...

Stay focused on YOUR project... Buy your parts 1 time so research is of essence...

I will be happy to answer any questions that I can just let me know...

[Saclandman]

Looks like a good start. Good luck with your project.

[JRE]

Welcome to Oregon. There are few local guys that get together every once in a while. I'll be posting details soon in the nw section.

[benner]

Originally Posted by Oregon 1967 GMC

Thanks "Junksaver" cool name and accurate I suppose?


Sounds like very good advice, thank you. I starting to feel guilty spending so much time on this board and researching like a mad scientist. My spousal unit is in Florida for a week so I'm living it up.
Thanks, it's a labor of love.

Been here since 1993 so I'm almost used to the rain. Thanks and look forward to warmer weather and getting together some time soon. I'm all for meeting for dinner get togethers like on Sunday evenings at Old Chicago or someplace...

Excellent project and welcome to the world of "unfinished!" As an Oregonian, but Eastside, let me know how to get together and when. The annual Swap meet in Portland of course is a great meeting spot...

[Oregon 1967 GMC]

Thanks Benner, Camp Sherman doesn't seem that far out there still west of the Cascade range I think or you're right up there. I bet it's nice.

[Elliot949]

Good luck on your build... I have been 3 1/2 years on mine and I am probably at least 1 more year...

[Bomp]

Glad to see you started your build.

Congrats Man


I have a spot down at the track in April at the meet. Stop by if you get a chance.



Sub'd

[Oregon 1967 GMC]

Originally Posted by Bomp

Glad to see you started your build.

Congrats Man

I have a spot down at the track in April at the meet. Stop by if you get a chance.

Sub'd

oh yea had to do something. I replaced the windshield and it wasn't too hard walking it all the way around with a rope and some dishwater soap. Too lazy to walk outside and take final pic on windshield install but will post more later along with frame paint photo and.... I will see you at the raceway in APril and August might even drive truck down and I don't mean Toyota.

[Oregon 1967 GMC]

primed and ready for new glass (it cleaned up nice with only one or two holes) and bare frame.

[Oregon 1967 GMC]

one more from the rear

[68Gold/white]

Originally Posted by Oregon 1967 GMC

one more from the rear

LOL, no comment....

[Ratz]

Hi there can you help me out brought this vehicle from Eagle Point and I am looking to add a little bit of authenticity by adding a local brewery logo onto the side of my truck any ideas please

[Oregon 1967 GMC]

Time to update this rolling project. Significant accomplishments: Installed 400 small block (kept original 250)...Got the cab floor all signed sealed and delivered with epoxy primer to include left & right areas cleaned up and replaced to include inner/outer rocker panels...
Had rear crossmember straightened after breaking umpteen drill bits getting it out.....
fixed big dent on outer cab rear wall with stud puller (awesome tool)......

Welded patches on core support, fenders, dipped doors and grille in acid bath........
Spent a thousand hours welding/ finishing front grill (bought donor grill from junkyard to fix inner curves)

I bounced around different areas throughout summer but now it's getting nasty out and I'm getting lazy.

[Oregon 1967 GMC]

"The fix is in."

[Oregon 1967 GMC]

Rolling right along..........

[Oregon 1967 GMC]

It's cramped quarters in this one car (if that!)garage but I'm glad I have that anyway. Not sure about doing my brakes and suspension in here though.

[michael bustamante]

so your grill was a stainless originally? any dings n dents you had to work out?

[Oregon 1967 GMC]

Originally Posted by michael bustamante

so your grill was a stainless originally? any dings n dents you had to work out?

Oh yeah it was terrible, the "G" had little or no bottom. The rusted out grill I used as a donor had those rust dimples but I was able to smooth it out. You can follow the Filler in this photo to see where I welded. I forgot to take photo right after I welded in piece.

[Oregon 1967 GMC]

I plan on keeping original steering wheel and add power steering. Do need new shifter and the shift indicator.

[Oregon 1967 GMC]

Somedays I'm not that motivated but try to do a little something every other day or so. During the summer it was nonstop dawn to dusk. I can help you tackle to floor, rocker panels etc if you want any help.

[jim-bob]

....HeyMan....What the Hey happened LOL...I was really enjoyin the build but after a year I sure would like to see the finish..You didn't sell it before that happened did you?

[Oregon 1967 GMC]

tackling the brakes and suspension....

[Oregon 1967 GMC]

Got the control arms off and ready to clean it up and put it together.