Lowering an '05 Sierra - The 1947 - Present Chevrolet & GMC Truck Message Board Network

deyomatic · 08-04-2009, 07:59 AM

I recently acquired an '05 Sierra, bottom of the line except that it has 4WD. I think the rear is WAY too high off the ground and wanted to lower it a smidge, nothing crazy. Can I just remove the factory lift blocks or will I need to put angled shims in there to retain the pinion angle?
What about the front? Again, I don't want anythiing wild, I just don't think the frame needs to be on display for everyone to see.

Thanks.

08-04-2009, 07:59 AM	#1
deyomatic Registered User Join Date: Oct 2008 Location: Wethersfield, CT Posts: 39	Lowering an '05 Sierra I recently acquired an '05 Sierra, bottom of the line except that it has 4WD. I think the rear is WAY too high off the ground and wanted to lower it a smidge, nothing crazy. Can I just remove the factory lift blocks or will I need to put angled shims in there to retain the pinion angle? What about the front? Again, I don't want anythiing wild, I just don't think the frame needs to be on display for everyone to see. Thanks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.