The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board > 67-72 Chevrolet & GMC Pickups Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-16-2018, 12:45 PM   #126
ryans69chevy
Registered User
 
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,053
Re: Fashionable Fever! - 1969 Chevy C10 Build

Quote:
Originally Posted by dec010974 View Post
awesome. if all things are possible, im gonna try this. i hope mine turns out as good as yours.
It's not too terribly hard... just takes time and room to work which I always seem to be lacking in! You can do it!
ryans69chevy is offline   Reply With Quote
Old 06-18-2018, 09:51 PM   #127
ryans69chevy
Registered User
 
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,053
Re: Fashionable Fever! - 1969 Chevy C10 Build

Getting her closed up... slowly... made a list of what needed to be done before I flip the cab back upright. Still have quite a bit to do!
Attached Images
 
ryans69chevy is offline   Reply With Quote
Old 06-21-2018, 12:14 AM   #128
Odaroloc
Registered User
 
Odaroloc's Avatar
 
Join Date: Aug 2011
Location: Wasilla, Alaska
Posts: 168
Re: Fashionable Fever! - 1969 Chevy C10 Build

Looks great man! Givin me inspiration to start on my 69. Probably gonna have to get the one piece floor for mine also. Just so expensive for me right now haha Keep up the work man! Cant wait to see it finished
__________________
1971 GMC Sierra Grande 2500 2wd "Sadiee" Caddy 472/TH400 Project "Sadiee"
1969 Chevy C/10 Build "Maisie" Thread coming soon
Odaroloc is offline   Reply With Quote
Old 06-23-2018, 10:13 AM   #129
ryans69chevy
Registered User
 
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,053
Re: Fashionable Fever! - 1969 Chevy C10 Build

Quote:
Originally Posted by Odaroloc View Post
Looks great man! Givin me inspiration to start on my 69. Probably gonna have to get the one piece floor for mine also. Just so expensive for me right now haha Keep up the work man! Cant wait to see it finished
Thank you. I would do the one piece floor if you have to replace a majority of the cab. It's money well spent and saves a ton of time. For me and the amount of rust I had, the cost of the one piece floor vs all the patches was only $80-$100 more.
ryans69chevy is offline   Reply With Quote
Old 06-27-2018, 12:16 AM   #130
ryans69chevy
Registered User
 
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,053
Re: Fashionable Fever! - 1969 Chevy C10 Build

Work on this cab has slowed down a bit since I purchased a 67 c10. So I've been trying to get that driveable and running.

I finished (hopefully) with the passenger side as far as replacing/repairing metal. The drip rail is put back on
Attached Images
 
ryans69chevy is offline   Reply With Quote
Old 06-27-2018, 12:18 AM   #131
ryans69chevy
Registered User
 
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,053
Re: Fashionable Fever! - 1969 Chevy C10 Build

Here is just a pic of the shiny new metal I welded in and a little bit of the header panel. It's coming along...
Attached Images
 
ryans69chevy is offline   Reply With Quote
Old 07-24-2018, 11:09 PM   #132
ryans69chevy
Registered User
 
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,053
Re: Fashionable Fever! - 1969 Chevy C10 Build

I pushed this off to the side for awhile so I could work on my "new" 67 I bought in early June. I'm at a standstill on that while I wait for the engine block to get professionally cleaned and checked.

It doesn't look like much, but anything helps right? It's taking me a little bit to make these pieces by hand. This is the drivers side now. I drilled a hole for the wire to run through the pillar to feed my cab roof lights. Just through in a 3/4" chase nipple so the wire won't rub against sharp metal and short out down the road. I also bent up the piece to tie back into the drip rail area. Just have to cut it down to fit and weld it in. Should be able to get that installed by the end of the week!
Attached Images
 
ryans69chevy is offline   Reply With Quote
Old 07-25-2018, 01:47 PM   #133
knomadd
Registered User
 
knomadd's Avatar
 
Join Date: Jul 2012
Location: Rosenberg, Texas
Posts: 3,506
Re: Fashionable Fever! - 1969 Chevy C10 Build

Wow... I just found your thread and I must say, you've been busy. Nice work this far, keep it up and you'll have a brand new truck when you're finished.
__________________
-Duane

C/10 Club Texas member
1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project)
1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)
knomadd is offline   Reply With Quote
Old 07-25-2018, 11:39 PM   #134
ryans69chevy
Registered User
 
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,053
Re: Fashionable Fever! - 1969 Chevy C10 Build

Quote:
Originally Posted by knomadd View Post
Wow... I just found your thread and I must say, you've been busy. Nice work this far, keep it up and you'll have a brand new truck when you're finished.
Hey Duane, I appreciate that! It's coming very slowly, but I enjoy (most of the time) the heck out of restoring this old thing. Hopefully when it's done it can be as nice as your pickup!
ryans69chevy is offline   Reply With Quote
Old 08-02-2018, 08:25 PM   #135
ryans69chevy
Registered User
 
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,053
Re: Fashionable Fever! - 1969 Chevy C10 Build

Got the missing piece welded in! Still got to clean up the welds and then I can reinstall the drip cap.
Attached Images
 
ryans69chevy is offline   Reply With Quote
Old 09-01-2018, 09:54 PM   #136
ryans69chevy
Registered User
 
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,053
Re: Fashionable Fever! - 1969 Chevy C10 Build

I got my 67 running and drivable. Drove it over to the alignment shop. Should be done next week sometime. Not too worried since it gives me more room in the garage!

Couldn't wait to get back at this cab work! Finished up the drivers side drip rail and I made the missing piece to go on the inner roof. Hopefully tomorrow I can weld the piece in!
Attached Images
 
ryans69chevy is offline   Reply With Quote
Old 09-02-2018, 06:48 PM   #137
ryans69chevy
Registered User
 
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,053
Re: Fashionable Fever! - 1969 Chevy C10 Build

Welded in the last piece on the drivers side inner roof. Almost ready to flip the cab upright!
Attached Images
 
ryans69chevy is offline   Reply With Quote
Old 09-10-2018, 12:20 AM   #138
ryans69chevy
Registered User
 
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,053
Re: Fashionable Fever! - 1969 Chevy C10 Build

Managed to get the cab flipped upright after sanding all the paint off the interior roof. I need to purchase some insulation for the roof before I weld back on the outer roof skin.

So in the meantime I just started to work on the lower pillars and kick panel on the passenger side. The kick panel is a really doozy for some reason. It took awhile to get it cut to fit and tacked in place. Still got a bit more welding to do on the panels.

Here is the lower "B" pillar patch. Of course it needed some modification to get it to line up correctly. I'm curious why there are two holes vertically in a line where the back cab support matches up with the b pillar. I thought these were spot welded in place, but it seems the holes are for bolting the b pillar to the floor. Is this correct?
Attached Images
 
ryans69chevy is offline   Reply With Quote
Old 09-16-2018, 10:57 PM   #139
ryans69chevy
Registered User
 
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,053
Re: Fashionable Fever! - 1969 Chevy C10 Build

Passenger side kick panel mostly done. Need to clean up some welds and such. The A pillar is also tacked in. I also hung the door in preparation for the cab corner and rocker.
Attached Images
 
ryans69chevy is offline   Reply With Quote
Old 09-16-2018, 11:02 PM   #140
ryans69chevy
Registered User
 
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,053
Re: Fashionable Fever! - 1969 Chevy C10 Build

I moved on to the drivers side after looking at the passenger side corner and rocker. Wasn't ready to tackle that. So I got the drivers side kick panel done and B pillar tacked on. I also got the A pillar all ready to be tacked on just ran out of time tonight.
Attached Images
 
ryans69chevy is offline   Reply With Quote
Old 09-18-2018, 10:52 PM   #141
ryans69chevy
Registered User
 
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,053
Re: Fashionable Fever! - 1969 Chevy C10 Build

Finished with the drivers side B pillar. Also cleaned up the cab corner area in preparation to get that done.

Last night I hung the door and screwed on the cab corner and rocker. Got it all to line up, but I'm left with a 5/16" gap along side the bottom of door. The vertical gap along the cab corner seam and up look pretty good and the area just below the drip rail looks okay. I know these didn't have the cleanest gaps back then so I'm not that worried. I'd just like to get the rocker up a bit more, but if I do that, the bottom of the rocker and cab corner don't line up. I can't move my cab corner up any or the body lines won't line up. So I'm stuck with a little bigger gap below the door unless someone has any ideas?
Attached Images
 
ryans69chevy is offline   Reply With Quote
Old 09-18-2018, 11:05 PM   #142
Originalthor
Registered User
 
Join Date: Oct 2017
Location: Saskatoon Saskatchewan
Posts: 74
Re: Fashionable Fever! - 1969 Chevy C10 Build

Looking good on the cab repairs. Glad I'm not the only having to do the same repairs. Now if I found this thread earlier I would of got you to bend me a couple of those above the door pieces aswell. Were they tough to do with one part being square and the other one rounded.
Originalthor is offline   Reply With Quote
Old 09-19-2018, 06:34 PM   #143
ryans69chevy
Registered User
 
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,053
Re: Fashionable Fever! - 1969 Chevy C10 Build

Quote:
Originally Posted by Originalthor View Post
Looking good on the cab repairs. Glad I'm not the only having to do the same repairs. Now if I found this thread earlier I would of got you to bend me a couple of those above the door pieces aswell. Were they tough to do with one part being square and the other one rounded.
Yea it's a lot of work but worth it. I'm glad I took the skin off. There was a ton of metal rusting under it and I could do a lot better job on the inner roof.

As far as the part above the door - do you mean where the drip rail attaches to or the inner roof where it ties into the door jamb? The inner roof was actually easier than I thought it would be. I took a piece of 20gauge and used my welding tank to bend it and then used my air flanger for the door jamb. The piece where the drip rail attaches was a bit tough since my metal brake doesn't do those back to back bends. I actually had to weld a piece of 1/4" round to the metal and bend it by hand. It's not as tight of a 90* bend as the original, but it works and it's pretty hidden.

I saw your pics on another thread. I still got to check out your build thread, but it looks like your going all out on yours! It's gonna be sweet!
ryans69chevy is offline   Reply With Quote
Old 09-20-2018, 12:22 AM   #144
Originalthor
Registered User
 
Join Date: Oct 2017
Location: Saskatoon Saskatchewan
Posts: 74
Re: Fashionable Fever! - 1969 Chevy C10 Build

The piece in post 135. The one side is non existent and the other side is half there on mine. Looks good though but tough to bend I bet.
I got a door and a fender I'm going to carve up for most of my patches. The curves look pretty close to the same as the roof skin. I'll have to track down one of those air flange tools, looks like it did a good job and would be handy to have with the amount of work I'm doing.
Originalthor is offline   Reply With Quote
Old 09-20-2018, 07:35 PM   #145
ryans69chevy
Registered User
 
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,053
Re: Fashionable Fever! - 1969 Chevy C10 Build

Quote:
Originally Posted by Originalthor View Post
The piece in post 135. The one side is non existent and the other side is half there on mine. Looks good though but tough to bend I bet.
I got a door and a fender I'm going to carve up for most of my patches. The curves look pretty close to the same as the roof skin. I'll have to track down one of those air flange tools, looks like it did a good job and would be handy to have with the amount of work I'm doing.
Yep that's the piece that was a bit hard for me to do with my harbor freight 36" brake. Like I said I bent one 90* then measured out to where the next 90* would be and welded a piece of 1/4 round steel along the line that I measured and used a wide vice crimp to bend a 90* in it. It took a bit of time, but turned out pretty good for not having the right metal brake. Also it will be mostly covered in the end.

The flange tool did an okay job. I'm sure they make a better one than what I have. I bought mine at a Napa a few years ago. It was probably $50. Funny thing is is I don't even have an air compressor... it's on my list to get!
ryans69chevy is offline   Reply With Quote
Old 09-30-2018, 11:09 PM   #146
ryans69chevy
Registered User
 
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,053
Re: Fashionable Fever! - 1969 Chevy C10 Build

I finally got my drivers cab corner tacked in. That thing took awhile to get fitted. I've spent a lot more hours on it than I thought it would take. I figured I better make it look good since it's a piece people like to look at! After I tacked it in I tested my rocker and it dropped right in so that's always a good thing! Hopefully I can keep working on the cab for another month or so before it gets too cold.
Attached Images
 
ryans69chevy is offline   Reply With Quote
Old 09-30-2018, 11:38 PM   #147
Kronald_70GMC
Senior Member
 
Kronald_70GMC's Avatar
 
Join Date: Sep 2015
Location: Martensville, Saskatchewan
Posts: 943
Re: Fashionable Fever! - 1969 Chevy C10 Build

Quote:
Originally Posted by ryans69chevy View Post
I finally got my drivers cab corner tacked in. That thing took awhile to get fitted. I've spent a lot more hours on it than I thought it would take. I figured I better make it look good since it's a piece people like to look at! After I tacked it in I tested my rocker and it dropped right in so that's always a good thing! Hopefully I can keep working on the cab for another month or so before it gets too cold.
Looking good man! I knew you would be done before me. I was working on my truck today too....ok so in an indirect way. I am actually trying to make a home for the truck in my yard so it doesn't end up under a snow drift in a field this winter. Hopefully the weather holds up for a few more weeks.
__________________
Kyle

1970 GMC "Project Splice"

2017 Silverado LTZ (Daily Driver)

IG: kyle_ronald
Kronald_70GMC is offline   Reply With Quote
Old 10-01-2018, 12:04 AM   #148
ryans69chevy
Registered User
 
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,053
Re: Fashionable Fever! - 1969 Chevy C10 Build

Quote:
Originally Posted by Kronald_70GMC View Post
Looking good man! I knew you would be done before me. I was working on my truck today too....ok so in an indirect way. I am actually trying to make a home for the truck in my yard so it doesn't end up under a snow drift in a field this winter. Hopefully the weather holds up for a few more weeks.
I'd come give ya hand if you weren't so far away...
ryans69chevy is offline   Reply With Quote
Old 11-16-2018, 08:56 PM   #149
Kronald_70GMC
Senior Member
 
Kronald_70GMC's Avatar
 
Join Date: Sep 2015
Location: Martensville, Saskatchewan
Posts: 943
Re: Fashionable Fever! - 1969 Chevy C10 Build

Any updates recently? Figured you would have had the cab primed by now
__________________
Kyle

1970 GMC "Project Splice"

2017 Silverado LTZ (Daily Driver)

IG: kyle_ronald
Kronald_70GMC is offline   Reply With Quote
Old 11-17-2018, 03:55 PM   #150
ryans69chevy
Registered User
 
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,053
Re: Fashionable Fever! - 1969 Chevy C10 Build

Quote:
Originally Posted by Kronald_70GMC View Post
Any updates recently? Figured you would have had the cab primed by now
Ha! Funny guy! No I haven't been working on it since my last update. Not sure why - have all the time in the world, I guess I have just been lazy lately. Just wasn't ready for the cold this year I guess. I had to park my 67 and my car in the garage now too so I don't have as much room to work on it which kinda sucks.

I've been watching everybody's builds and getting eager to get out there again soon!
ryans69chevy is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:26 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com