16.5x10 8 lug Steel Wheels PA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1985-GMC · 10-26-2010, 12:05 AM

Not mine, just thought someone might be interested if your close. They look to be the inner nubs but that's nothing that cant be fixed.
http://cgi.ebay.com/ebaymotors/16-5x...TruckQ5fWheels

OLDCHEV4X4 · 10-28-2010, 10:50 AM

I think 'special -k' was looking for these.

**special-K** · 10-28-2010, 11:07 AM

I'd like those,but too far right now.I found my 4th 8.25 and now have a powder coated set to mount my 12.50/37 SSRs on so I can get up under the '72 with the lift,Dana60,high-steer crossover,4spd...
If I got those I'd run them w/o caps in gloss black with Ground Hawgs or Boggers

1985-GMC · 10-28-2010, 09:30 PM

I love the look of these kind of wheels with factory hubcaps, and Ground Hawgs would really set off the whole look to them.

b454rat · 10-29-2010, 07:45 PM

Guy isn't too far from me, tempted to go get them...I too like these wheels with the factory hubcaps...

**special-K** · 10-30-2010, 08:10 AM

Just a note,no GM caps will fit.They are Ford-style...inner nubs.

b454rat · 10-30-2010, 08:47 AM

Even better. Got thinking, I have a Ford HP60 in my truck, GM wheels won't fit. These look cool with the newer style center caps on them too....

b454rat · 10-31-2010, 10:49 AM

Going to pick these up today.....

Anybody have a link or know where to get the lugs that have the external thread?? I want to get a set of newer center caps to put on these wheels....

**special-K** · 10-31-2010, 11:55 AM

COOL! I wish I could help.I always pick them up at Carlisle.I believe a tire store can get then.Probably will want more than on Ebay,though.

b454rat · 10-31-2010, 03:39 PM

Well got the wheels, not sure what they are. They don't fit a Ford front axle, but fit GM fine. They have a slightly bigger hub opening than a GM, by 1/16" I think. I'm thinking they could be skidsteer wheels, the inside has a little bit of yellow. But 5 wheels for $100, not gonna complain.

I think I found the lugs on ebay, but want to be sure. I wanted to go to Carlisle to get those, but didn't get a chance to go.

**special-K** · 10-31-2010, 05:30 PM

I wasn't sure the center caps would fit those,but I measured what I have and they will.That'll be cool.I used black '95 centers on some D-hole steel wheels on my '91 Suburban.I always figured they'd only work on the aftermarket steel wheels which are basically flat in the center (wagon wheels,nuggets,Eatons,d-holes,etc).I just figured the raised part where the the hub caps snap over was too small inside.Great score!

115-K10 · 11-04-2010, 04:30 PM

I have been looking for a cool bias retro 16.5 tire for a reasonable price and just found them. Already placed an order for a set of 9.5x16.5. $119 each.

http://tiremartusa.com/p-135-super-t...-tubeless.aspx
Posted via Mobile Device

**special-K** · 11-05-2010, 07:06 AM

Thanks for sharing that.That's the one size still available for the 2wds in radial,too.Those bias plies are just right on a C/20.

10-26-2010, 12:05 AM	#1
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	16.5x10 8 lug Steel Wheels PA Not mine, just thought someone might be interested if your close. They look to be the inner nubs but that's nothing that cant be fixed. http://cgi.ebay.com/ebaymotors/16-5x...TruckQ5fWheels __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

10-28-2010, 10:50 AM	#2
OLDCHEV4X4 Registered User Join Date: Apr 2000 Location: Chester County PA, USA Posts: 1,228	Re: 16.5x10 8 lug Steel Wheels PA I think 'special -k' was looking for these. __________________ 72 k/10 short wideside 72 k/5 Blazer 72 K/5 Blazer - obstacle course racer 72 custom/10 8' bed 70 K/5 Blazer 67 C-30 GMC Flat bed 86 GMC K2500 Plow Truck 85 GMC K3500 84 M1008 85 M1008 77 G30 Motor Home 72 Sears 12hp Tractor Glenmoore, Pennsylvania

10-28-2010, 11:07 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 16.5x10 8 lug Steel Wheels PA I'd like those,but too far right now.I found my 4th 8.25 and now have a powder coated set to mount my 12.50/37 SSRs on so I can get up under the '72 with the lift,Dana60,high-steer crossover,4spd... If I got those I'd run them w/o caps in gloss black with Ground Hawgs or Boggers __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-28-2010, 09:30 PM	#4
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: 16.5x10 8 lug Steel Wheels PA I love the look of these kind of wheels with factory hubcaps, and Ground Hawgs would really set off the whole look to them. __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

10-29-2010, 07:45 PM	#5
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,453	Re: 16.5x10 8 lug Steel Wheels PA Guy isn't too far from me, tempted to go get them...I too like these wheels with the factory hubcaps... __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 6” lift 1999 GMC Yukon 350/4L60 4" SAS

10-30-2010, 08:10 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 16.5x10 8 lug Steel Wheels PA Just a note,no GM caps will fit.They are Ford-style...inner nubs. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-30-2010, 08:47 AM	#7
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,453	Re: 16.5x10 8 lug Steel Wheels PA Even better. Got thinking, I have a Ford HP60 in my truck, GM wheels won't fit. These look cool with the newer style center caps on them too.... __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 6” lift 1999 GMC Yukon 350/4L60 4" SAS

10-31-2010, 10:49 AM	#8
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,453	Re: 16.5x10 8 lug Steel Wheels PA Going to pick these up today..... Anybody have a link or know where to get the lugs that have the external thread?? I want to get a set of newer center caps to put on these wheels.... __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 6” lift 1999 GMC Yukon 350/4L60 4" SAS

10-31-2010, 11:55 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 16.5x10 8 lug Steel Wheels PA COOL! I wish I could help.I always pick them up at Carlisle.I believe a tire store can get then.Probably will want more than on Ebay,though. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-31-2010, 03:39 PM	#10
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,453	Re: 16.5x10 8 lug Steel Wheels PA Well got the wheels, not sure what they are. They don't fit a Ford front axle, but fit GM fine. They have a slightly bigger hub opening than a GM, by 1/16" I think. I'm thinking they could be skidsteer wheels, the inside has a little bit of yellow. But 5 wheels for $100, not gonna complain. I think I found the lugs on ebay, but want to be sure. I wanted to go to Carlisle to get those, but didn't get a chance to go. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 6” lift 1999 GMC Yukon 350/4L60 4" SAS

10-31-2010, 05:30 PM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 16.5x10 8 lug Steel Wheels PA I wasn't sure the center caps would fit those,but I measured what I have and they will.That'll be cool.I used black '95 centers on some D-hole steel wheels on my '91 Suburban.I always figured they'd only work on the aftermarket steel wheels which are basically flat in the center (wagon wheels,nuggets,Eatons,d-holes,etc).I just figured the raised part where the the hub caps snap over was too small inside.Great score! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-04-2010, 04:30 PM	#12
115-K10 Registered User Join Date: Feb 2009 Location: Albany, NY Posts: 144	Re: 16.5x10 8 lug Steel Wheels PA I have been looking for a cool bias retro 16.5 tire for a reasonable price and just found them. Already placed an order for a set of 9.5x16.5. $119 each. http://tiremartusa.com/p-135-super-t...-tubeless.aspx Posted via Mobile Device __________________ The chum Bucket - SWB K10 Restoration - http://67-72chevytrucks.com/vboard/s...d.php?t=329775 1971 SS454 Monte http://www.hemmings.com/mus/stories/...feature14.html 1970 - Monte Carlo Convertible, LS6, L89, M22 Build http://www.firstgenmc.com/ubbthreads...=360236&page=1 1970-SS454 Tripe Black - Barn Find http://www.firstgenerationmontecarlo...=421201&page=1 Last edited by 115-K10; 11-04-2010 at 04:34 PM.

11-05-2010, 07:06 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 16.5x10 8 lug Steel Wheels PA Thanks for sharing that.That's the one size still available for the 2wds in radial,too.Those bias plies are just right on a C/20. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.