Has anyone used the IDIDIT column? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RADustin · 05-23-2018, 01:37 PM

Looking at possibly using an IDIDIT floor shift column in my '76. Just wondering if anyone has used it and can elaborate on the install?

Mainly I want to know if the column can be pushed into the dash more than stock and how the column was attached at the firewall.

Thanks!

Ziegelsteinfaust · 05-23-2018, 11:01 PM

If you get a universal column you can make it sit in further, but a replacement won't just do it.

You can pull your old column out. Drill the plastic rivets on the shaft, and tap it in 2 inches. It requires a few other mods but it is a 3 hour project.

05-23-2018, 01:37 PM	#1
RADustin Registered User Join Date: Jun 2017 Location: New Orleans Posts: 386	Has anyone used the IDIDIT column? Looking at possibly using an IDIDIT floor shift column in my '76. Just wondering if anyone has used it and can elaborate on the install? Mainly I want to know if the column can be pushed into the dash more than stock and how the column was attached at the firewall. Thanks! __________________ 1949 Chevy 3100 P/U http://67-72chevytrucks.com/vboard/s...d.php?t=302780 1976 GMC Sierra Classic C35 CCSB http://67-72chevytrucks.com/vboard/s...25#post8188825

05-23-2018, 11:01 PM	#2
Ziegelsteinfaust Registered User Join Date: Dec 2012 Location: Temple City Posts: 3,560	Re: Has anyone used the IDIDIT column? If you get a universal column you can make it sit in further, but a replacement won't just do it. You can pull your old column out. Drill the plastic rivets on the shaft, and tap it in 2 inches. It requires a few other mods but it is a 3 hour project.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.