|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-26-2018, 07:09 PM
|
#1 |
|
Registered User
Join Date: Oct 2015
Location: San Tan Valley, Arizona
Posts: 313
|
Front brake drum rivet removal
On my 68 the drums were still riveted to the hub. I ground off the end on the drum side and got the drum off. How do I get the rest of the rivet out. I have been pounding on them with a drift with no luck. I tried drilling one out, but a battery powered drill just isn't cutting it. I am thinking some heat might help. How have others done this? Thanks!
|
|
|
|
05-26-2018, 07:50 PM
|
#2 |
|
Registered User
 Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: Front brake drum rivet removal
leave them in, no big deal
__________________
I BELIEVE IN JOHN 3:16 |
|
|
|
|
05-26-2018, 09:58 PM
|
#3 |
|
Senior Member
Join Date: Jun 2014
Location: Mocksville, NC
Posts: 1,723
|
Re: Front brake drum rivet removal
I just left them in on mine, but I think it's too late for you to do that since you've been pounding on them. If you can get a grinder in there, you can grind it smooth and then usually the remaining portion of the rivet is pretty easy to knock out with a punch.
__________________
Builds: Green Gus the 68 C10 ; Sullii the 72 1500 - Instagram: @dr.hewitt - C10 Concept/Development Photos: Master Thread |
|
|
|
|
05-26-2018, 10:47 PM
|
#4 |
|
Registered User
Join Date: Oct 2015
Location: San Tan Valley, Arizona
Posts: 313
|
Re: Front brake drum rivet removal
Thank you both for the help. After the face palm moment I tried the new drums and the do fit. They are apparently particular about their orientation now but that's fine. I really only tried drilling one out so I just cleaned it up a bit and it seems to work fine. Put the new bearing races in so now it's ready to reassemble. Thanks for the help!
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
