|
08-07-2017, 01:28 PM
|
#1 |
|
Registered User
Join Date: May 2007
Location: nepa
Posts: 745
|
heater core
seen that they make a heater core for non a/c in aluminum or brass. which is better? Any body know?
|
|
|
|
08-07-2017, 02:57 PM
|
#2 |
|
Registered User
Join Date: Feb 2003
Location: Santa Ana, CA
Posts: 2,191
|
Re: heater core
I'd stick with brass. Its most likely all brazed together. Odds are that the aluminum one has epoxy holding the tanks to the core. The epoxy has a tendency to crack over time.
|
|
|
|
|
08-08-2017, 08:50 PM
|
#3 |
|
Registered User
Join Date: Oct 2009
Location: Great White North
Posts: 1,521
|
Re: heater core
Any of the aluminum ones I have seen, the end tanks have squared off corners meaning they don't fit the brackets that screw in to the heater box very well at all.
The factory brass ones, the tank ends have rounded corners to fit those brackets.
__________________
Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
