1967 C10 SWB 7' stepside bed help ID? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chilly178 · 04-15-2023, 02:54 PM

Bought this SWB 67 C10 and it came with this almost 7' step side bed. Anyone have any ideas what this is off of?

**cwcarpenter98** · 04-15-2023, 11:43 PM

Kinda seems like someone used a short bed frame but then took long bed sides and cut them down to make a 7 ft bed. There seems to be more length at the rear of the bed than the typical short bed step sides

BLAZERMAN · 04-16-2023, 03:06 AM

Yep, exactly what cwcarpenter98 said, it's a long stepside bed with 12" taken out at the front to fit a 115" wheelbase chassis. You can tell by the position of the middle stake pockets. The shortbed only have a pocket at the front and rear...no middle pocket. Also that drivers side fender with the tire cutout is from a long stepside bed.

Chilly178 · 04-16-2023, 05:19 PM

Thanks for the input I think I'm gonna take it off and look for a short bed fleet side to put on it.

04-15-2023, 02:54 PM	#1
Chilly178 Registered User Join Date: May 2016 Location: Green Bay, WI Posts: 129	1967 C10 SWB 7' stepside bed help ID? Bought this SWB 67 C10 and it came with this almost 7' step side bed. Anyone have any ideas what this is off of? Attached Images Last edited by Chilly178; 04-15-2023 at 03:35 PM.

04-15-2023, 11:43 PM	#2
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: 1967 C10 SWB 7' stepside bed help ID? Kinda seems like someone used a short bed frame but then took long bed sides and cut them down to make a 7 ft bed. There seems to be more length at the rear of the bed than the typical short bed step sides __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

04-16-2023, 03:06 AM	#3
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Re: 1967 C10 SWB 7' stepside bed help ID? Yep, exactly what cwcarpenter98 said, it's a long stepside bed with 12" taken out at the front to fit a 115" wheelbase chassis. You can tell by the position of the middle stake pockets. The shortbed only have a pocket at the front and rear...no middle pocket. Also that drivers side fender with the tire cutout is from a long stepside bed. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

04-16-2023, 05:19 PM	#4
Chilly178 Registered User Join Date: May 2016 Location: Green Bay, WI Posts: 129	Re: 1967 C10 SWB 7' stepside bed help ID? Thanks for the input I think I'm gonna take it off and look for a short bed fleet side to put on it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.