Blazer rear cargo side panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**6t727t2** · 08-19-2007, 10:35 AM

Anyone still have the paper templates for making rear panels that were around here a few years ago? I could use a set. Thanks, Harry

JWPOORE · 08-19-2007, 01:53 PM

Quote:

Originally Posted by 6t727t2

Anyone still have the paper templates for making rear panels that were around here a few years ago? I could use a set. Thanks, Harry

If you find someone that does, let me know because I could use a set a well. My carpentry skills suck and I could use the help by simply tracing and cutting.

vtblazer · 08-19-2007, 06:44 PM

My panels are off right now, could trace em out.

What would be best for paper?

We'd want something that'd be tough enough to work with but simple to deal with...know what I mean?

Thealien · 08-19-2007, 07:08 PM

I too would like a template

Long Roof · 08-19-2007, 08:14 PM

I'd like some templates also. The template could be made out of some heavy clear visqueen. This would be durable and easy to roll up.

Has anyone ever made these panels with aluminum diamond plate? I am thinking of doing this and mounting speakers in them.

Aaron

ABLAZN · 08-19-2007, 08:29 PM

I would love to have a template myself.

**6t727t2** · 08-19-2007, 08:53 PM

Hey Kurt,
There was a blue blazer that was being restored a few years ago on here, they made foldable paper templates for both sides, but I dont remember what kind of paper they used. Maybe someone will chime in.
Harry

BigRed Beast · 08-19-2007, 09:28 PM

Man, make some templates out of 1/4 door skin, cut 'em in half and we'll start mailing them to each other...

vtblazer · 08-19-2007, 09:31 PM

Quote:

Originally Posted by 6t727t2

Hey Kurt,
There was a blue blazer that was being restored a few years ago on here, they made foldable paper templates for both sides, but I dont remember what kind of paper they used. Maybe someone will chime in.
Harry

Yeah I remeber, that was Diane.

Blazer was sold, haven't seen much of her since.

vtblazer · 08-19-2007, 09:31 PM

Quote:

Originally Posted by BigRed Beast

Man, make some templates out of 1/4 door skin, cut 'em in half and we'll start mailing them to each other...

What's 1/4 door skin?

cstanley · 08-19-2007, 09:54 PM

hmm...
i've been tinkering with taking mine off and making some good measurements and drafting it up in cad. i can then plot them at work on a 6 ft. long sheet. no promises, but I'll try to give it a shot.

RED72blazer · 08-19-2007, 10:27 PM

Quote:

Originally Posted by vtblazer

My panels are off right now, could trace em out.

What would be best for paper?

We'd want something that'd be tough enough to work with but simple to deal with...know what I mean?

roll of butcher paper?

Long Roof · 08-19-2007, 10:32 PM

cstanley, I could use just an email of that cad file if you can get it to me in an Autocad format (dwg). Let me know.

Aaron

cstanley · 08-19-2007, 10:40 PM

Quote:

Originally Posted by Long Roof

cstanley, I could use just an email of that cad file if you can get it to me in an Autocad format (dwg). Let me know.

Aaron

sure, i'll give it a shot.

tdkosta · 08-20-2007, 12:53 AM

Can I get on board for a set also?

RAB38 · 08-20-2007, 10:12 AM

I would love to have a template for mine as well

Thealien · 08-20-2007, 10:26 AM

Quote:

Originally Posted by RED72blazer

roll of butcher paper?

Great idea. Durable rollable/foldable

**Yukon Jack** · 08-20-2007, 11:03 AM

I have the template Diane made a while back. I would be willing to mail it to someone who can make a CAD file if they will then mail the template back to me. If anyone is interested, PM me.

cstanley · 08-20-2007, 02:32 PM

Quote:

Originally Posted by Yukon Jack

I have the template Diane made a while back. I would be willing to mail it to someone who can make a CAD file if they will then mail the template back to me. If anyone is interested, PM me.

only part i had a little trouble taking-off is the radius over the wheel wells. it's just a guess right now. i'll upload in a few...

EDIT:
OK, HERE'S A SCALED SKETCH I WHIPPED OUT. PRINT ON REGULAR 8-1/2"X11" PAPER. MAKE SURE THAT IT'S NOT SET TO "SCALE TO FIT" OPTION, SO THAT IT WILL COME OUT AT THE CORRECT SCALE.

i ALSO HAVE THE FILES IN .DWG OR WHATEVER YOU WANT, JUST LET ME KNOW. THESE ARE NOT PERFECT. THE OVERALL DIMS ARE CORRECT, BUT I'M NOT CERTAIN ABOUT THE RADII OVER THE WHEEL WELLS. I'LL HAVE TO DOUBLE-CHECK THAT WHEN I GET HOME.

OH, AND IF YOU WANT THEM FORMATTED FOR FULL-SCALE OR 11X17 LET ME KNOW!

the image is just what the attached pdf looks like. I also uploaded a .zip file that contains a pair of autocad files. I saved them down to version 2004.
enjoy!

now for the disclaimer: I have not removed my side panels during this process. all measurements were done with the panels installed, but I still believe them to be accurate. If anyone finds otherwise, please let me know and I'll make changes...

LUV2XCLR8 · 08-20-2007, 04:11 PM

Cool

Angelse68cal · 08-20-2007, 04:45 PM

Hey guys I would like to get in on this also.

cstanley · 08-20-2007, 06:27 PM

Ok, I Finished Uploading Some Drawings. I Have These Drawn Now, So If Anyone Needs Them In Any Way, Or Any Format, Just Let Me Know And I'll Do What I Can.

fun in dirt · 08-20-2007, 06:35 PM

Come on guys...stop by your local body shop & get a big piece of cardboard. Then just start trimming until it fits like you want and trace that onto your final panel material!

Long Roof · 08-20-2007, 06:49 PM

cstanley, thanks a bunch.

Aaron

jaros44sr · 08-20-2007, 07:27 PM

Quote:

Originally Posted by LUV2XCLR8

Cool

X2, guess I have to update my winrar

08-19-2007, 10:35 AM	#1
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,430	Blazer rear cargo side panels Anyone still have the paper templates for making rear panels that were around here a few years ago? I could use a set. Thanks, Harry

08-19-2007, 06:44 PM	#3
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Re: Blazer rear cargo side panels My panels are off right now, could trace em out. What would be best for paper? We'd want something that'd be tough enough to work with but simple to deal with...know what I mean?

08-19-2007, 07:08 PM	#4
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,126	Re: Blazer rear cargo side panels I too would like a template

08-19-2007, 08:14 PM	#5
Long Roof Old School, New Style Join Date: Jun 2005 Location: Monroeville, Ohio Posts: 790	Re: Blazer rear cargo side panels I'd like some templates also. The template could be made out of some heavy clear visqueen. This would be durable and easy to roll up. Has anyone ever made these panels with aluminum diamond plate? I am thinking of doing this and mounting speakers in them. Aaron __________________ The Good: - 72 GMC Jimmy 4x4 - 307 cid / 350 th - 70 Chevy Suburban 1/2T 2wd - 454 cid /400 th - 96 Chevy Impala SS - mainly stock - 98 Chevy Tahoe LT 4x4 - all stock The Bad: - 86 Chevy Suburban 1/2T 4x4 - winter beater The Ugly: - 72 Chevy Suburban 1/2T 2wd - parts truck

08-19-2007, 08:29 PM	#6
ABLAZN Oh..never mind.... Join Date: Aug 2006 Location: Oregon Posts: 588	Re: Blazer rear cargo side panels I would love to have a template myself. __________________ 1972 Blazer -6 inch lift -35 inch BFG A/T's Turbo 350 NP-205 454 BB (for now) MORE TO COME !!!!!! Now going to 2WD!!!!! Sold. I got it back after 22 years and did not even know it !!! THE STORY HERE Project Low Down Dirty Rat

08-19-2007, 08:53 PM	#7
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,430	Re: Blazer rear cargo side panels Hey Kurt, There was a blue blazer that was being restored a few years ago on here, they made foldable paper templates for both sides, but I dont remember what kind of paper they used. Maybe someone will chime in. Harry

08-19-2007, 09:28 PM	#8
BigRed Beast Registered User Join Date: Aug 2007 Location: Parker, CO Posts: 140	Re: Blazer rear cargo side panels Man, make some templates out of 1/4 door skin, cut 'em in half and we'll start mailing them to each other...

08-19-2007, 09:54 PM	#11
cstanley Senior Member Join Date: Oct 2005 Location: Austin, TX Posts: 1,229	Re: Blazer rear cargo side panels hmm... i've been tinkering with taking mine off and making some good measurements and drafting it up in cad. i can then plot them at work on a 6 ft. long sheet. no promises, but I'll try to give it a shot. __________________ "Anybody who would paint his truck like this, would go to a minister's funeral dressed in feathers!" - Big Enis Burdett '72 Blazer Restoration Blog: http://sportchicken.blogspot.com/

08-19-2007, 10:32 PM	#13
Long Roof Old School, New Style Join Date: Jun 2005 Location: Monroeville, Ohio Posts: 790	Re: Blazer rear cargo side panels cstanley, I could use just an email of that cad file if you can get it to me in an Autocad format (dwg). Let me know. Aaron __________________ The Good: - 72 GMC Jimmy 4x4 - 307 cid / 350 th - 70 Chevy Suburban 1/2T 2wd - 454 cid /400 th - 96 Chevy Impala SS - mainly stock - 98 Chevy Tahoe LT 4x4 - all stock The Bad: - 86 Chevy Suburban 1/2T 4x4 - winter beater The Ugly: - 72 Chevy Suburban 1/2T 2wd - parts truck

08-20-2007, 12:53 AM	#15
tdkosta Registered User Join Date: Jan 2007 Location: Mesa, AZ Posts: 781	Re: Blazer rear cargo side panels Can I get on board for a set also?

08-20-2007, 10:12 AM	#16
RAB38 Registered User Join Date: Nov 2005 Location: Southern Maryland Posts: 164	Re: Blazer rear cargo side panels I would love to have a template for mine as well __________________ 72 Blazer CST 383 stroker roller, fuel inj, t350,NP205, D60 front, 14b rear, detroit locker, 38 x15.50 mtz's, welds, cross over steering, custom cage,Line X Spray in liner, House of Colors Tangelo Pearl Orange

08-20-2007, 11:03 AM	#18
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: Blazer rear cargo side panels I have the template Diane made a while back. I would be willing to mail it to someone who can make a CAD file if they will then mail the template back to me. If anyone is interested, PM me. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

08-20-2007, 04:11 PM	#20
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: Blazer rear cargo side panels Cool __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

08-20-2007, 04:45 PM	#21
Angelse68cal Cochino_Racing_909 Join Date: Oct 2006 Location: California Posts: 280	Re: Blazer rear cargo side panels Hey guys I would like to get in on this also.

08-20-2007, 06:27 PM	#22
cstanley Senior Member Join Date: Oct 2005 Location: Austin, TX Posts: 1,229	Re: Blazer rear cargo side panels Ok, I Finished Uploading Some Drawings. I Have These Drawn Now, So If Anyone Needs Them In Any Way, Or Any Format, Just Let Me Know And I'll Do What I Can. __________________ "Anybody who would paint his truck like this, would go to a minister's funeral dressed in feathers!" - Big Enis Burdett '72 Blazer Restoration Blog: http://sportchicken.blogspot.com/



Register or Log In To remove these advertisements.

08-20-2007, 06:35 PM	#23
fun in dirt Registered User Join Date: Jan 2007 Location: Mississippi Posts: 2,118	Re: Blazer rear cargo side panels Come on guys...stop by your local body shop & get a big piece of cardboard. Then just start trimming until it fits like you want and trace that onto your final panel material! __________________ '72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432 '85 K30 "Big Nassy" '06 3500 Duramax ...tow truck '06 Silverado SS...DD '06 C1500 WT...DD '07 Classic C1500 WT...DD Built & sold cause can't keep 'em all: '72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190 '55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938 '69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541 '86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619

08-20-2007, 06:49 PM	#24
Long Roof Old School, New Style Join Date: Jun 2005 Location: Monroeville, Ohio Posts: 790	Re: Blazer rear cargo side panels cstanley, thanks a bunch. Aaron __________________ The Good: - 72 GMC Jimmy 4x4 - 307 cid / 350 th - 70 Chevy Suburban 1/2T 2wd - 454 cid /400 th - 96 Chevy Impala SS - mainly stock - 98 Chevy Tahoe LT 4x4 - all stock The Bad: - 86 Chevy Suburban 1/2T 4x4 - winter beater The Ugly: - 72 Chevy Suburban 1/2T 2wd - parts truck

Register or Log In To remove these advertisements.