The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > Diesel Conversions

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-03-2019, 07:15 PM   #201
COS399
Registered User
 
COS399's Avatar
 
Join Date: Dec 2013
Location: Northern, MT
Posts: 563
Re: K30 Downgrade to Cummins Project

Thanks for the update. Looking good.
__________________

1987 GMC R2500 SC 454 T400
1988 Chevy R30 CC DRW 12 valve Cummins NV4500 GearVendors
1991 GMC R3500 CC DRW 12 valve Cummins NV4500 GearVendors
COS399 is offline   Reply With Quote
Old 05-03-2019, 08:00 PM   #202
Vintage Windmills
Vintage 4x4s
 
Vintage Windmills's Avatar
 
Join Date: Sep 2010
Location: Prior Lake, MN
Posts: 4,300
Re: K30 Downgrade to Cummins Project

Quote:
Originally Posted by COS399 View Post
Thanks for the update. Looking good.
Thanks COS

Mounts done, engine in for the last time and bolted down
The slots in them are an example of some parts of this build where I'm taking a bit more time to make things serviceable. I could have settled for just holes but then I'd have to pull the engine just to replace a mount since the mounts are at an angle.

Trans is in jail at the trans shop. Dropped it off 4 weeks ago. Back then they thought 2 weeks until they could look at it. Called 2 days ago and left a VM for an update and no call back yet
Attached Images
  
__________________

67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades)
67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore )
86 CHV K30 502 th400, apple red NEW
71 CHV K20 350 SM465, ochre (saved work truck)
71 CHV K20 292 SM465, white, tach, PTO, (future project)
72 CHV K20 350 350th, medium blue (project stocker)
01 CHV K2500hd crew, indigo blue

^3 dont run and the others don't see winter either
'86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649
'71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642
'72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6
Vintage Windmills is offline   Reply With Quote
Old 05-04-2019, 04:29 PM   #203
gmikkels
Senior Member
 
Join Date: Dec 2007
Location: franktown colorado
Posts: 278
Re: K30 Downgrade to Cummins Project

Awesome, looks like it belongs in there!!!
gmikkels is offline   Reply With Quote
Old 05-04-2019, 04:47 PM   #204
Madkidd007
Senior Member
 
Madkidd007's Avatar
 
Join Date: Nov 2018
Location: Athens, Ga
Posts: 801
Re: K30 Downgrade to Cummins Project

Small thought for you, the oil fill spot I noticed may be in the way like mine was for the upper radiator hose. The extension is the same thread as the cap itself so if it’s too tall you can replace the extension with just the cap.
Madkidd007 is offline   Reply With Quote
Old 05-21-2019, 12:00 AM   #205
Vintage Windmills
Vintage 4x4s
 
Vintage Windmills's Avatar
 
Join Date: Sep 2010
Location: Prior Lake, MN
Posts: 4,300
Re: K30 Downgrade to Cummins Project

Quote:
Originally Posted by gmikkels View Post
Awesome, looks like it belongs in there!!!
Thanks!

Quote:
Originally Posted by Madkidd007 View Post
Small thought for you, the oil fill spot I noticed may be in the way like mine was for the upper radiator hose. The extension is the same thread as the cap itself so if it’s too tall you can replace the extension with just the cap.
Good tip! I think the 2nd gen hose will clear it but if not, good info.


Time for an update on the build. I've been dealing with a couple distractions lately, getting an old mower ready for cuttting season. Any other Toro Groundsmaster fans here? This model 72 has a pretty good running 4cylinder watercooled Renault (continental) R10 engine. I put a new distributor with pertronix setup on. She's from 1980 but the 72 inch deck and rear wheel steer make for quick cutting. These are very durable machines. They still sold what was basically the same design through 2010 (but with creature comforts and a sweet 28 hp Kubota diesel) before they downsized the chassis a bit.

Also picked up a winter beater and/or future project. Its an 04.5 LLY that runs really well but has body issues and the price was too good to pass up. I've since obtained a rust free cab for it from a local guy who is also a forum member I've been changing fluids and trying to figure out what to do with it. Probably drive for a winter as is and then do the cab swap and find a new bed. It runs and drives very well and only has 220k on it, not much for a diesel. It was on old company truck and has a nice ag hitch on it, new batteries and very nice aftermarket stereo system.
Attached Images
  
__________________

67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades)
67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore )
86 CHV K30 502 th400, apple red NEW
71 CHV K20 350 SM465, ochre (saved work truck)
71 CHV K20 292 SM465, white, tach, PTO, (future project)
72 CHV K20 350 350th, medium blue (project stocker)
01 CHV K2500hd crew, indigo blue

^3 dont run and the others don't see winter either
'86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649
'71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642
'72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6
Vintage Windmills is offline   Reply With Quote
Old 05-21-2019, 12:12 AM   #206
Vintage Windmills
Vintage 4x4s
 
Vintage Windmills's Avatar
 
Join Date: Sep 2010
Location: Prior Lake, MN
Posts: 4,300
Re: K30 Downgrade to Cummins Project

Despite the distractions, I've still managed to make some progress on the K30. Things are really coming together. I'm basically having to make my own core support since the intercooler has to be so low and close to the radiator. More on that later.

I need to custom make the drain tube from turbo oil outlet to clear the engine mount. Need to figure out if its better/easier to run the oil drain line above or below the engine mount.
Attached Images
  
__________________

67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades)
67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore )
86 CHV K30 502 th400, apple red NEW
71 CHV K20 350 SM465, ochre (saved work truck)
71 CHV K20 292 SM465, white, tach, PTO, (future project)
72 CHV K20 350 350th, medium blue (project stocker)
01 CHV K2500hd crew, indigo blue

^3 dont run and the others don't see winter either
'86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649
'71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642
'72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6
Vintage Windmills is offline   Reply With Quote
Old 05-21-2019, 12:11 PM   #207
Madkidd007
Senior Member
 
Madkidd007's Avatar
 
Join Date: Nov 2018
Location: Athens, Ga
Posts: 801
Re: K30 Downgrade to Cummins Project

If I remember correctly there is an additional hole towards the rear you can put your drain to. Factory uses the front and plugs the rear. But regardless I would put my hard angle lower so you have zero chance of backing up the oil coming out of the turbo
Madkidd007 is offline   Reply With Quote
Old 05-23-2019, 06:21 PM   #208
Vintage Windmills
Vintage 4x4s
 
Vintage Windmills's Avatar
 
Join Date: Sep 2010
Location: Prior Lake, MN
Posts: 4,300
Re: K30 Downgrade to Cummins Project

Cool, i will look for that hole. That would make things a bit easier.
__________________

67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades)
67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore )
86 CHV K30 502 th400, apple red NEW
71 CHV K20 350 SM465, ochre (saved work truck)
71 CHV K20 292 SM465, white, tach, PTO, (future project)
72 CHV K20 350 350th, medium blue (project stocker)
01 CHV K2500hd crew, indigo blue

^3 dont run and the others don't see winter either
'86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649
'71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642
'72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6
Vintage Windmills is offline   Reply With Quote
Old 06-12-2019, 06:18 PM   #209
Dieselwrencher
6>8 Plugless........

 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 15,348
Re: K30 Downgrade to Cummins Project

Quote:
Originally Posted by Madkidd007 View Post
If I remember correctly there is an additional hole towards the rear you can put your drain to. Factory uses the front and plugs the rear. But regardless I would put my hard angle lower so you have zero chance of backing up the oil coming out of the turbo
That is only on storm blocks and his block is not a storm block. Jud, I'd go over the mount not under. The oil may not return to the pan properly. You can get SS flexible lines that will help this situation.

https://www.google.com/search?q=dodg...hrome&ie=UTF-8
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1976 K30 CC SWB Build Thread

Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 06-12-2019, 07:45 PM   #210
Madkidd007
Senior Member
 
Madkidd007's Avatar
 
Join Date: Nov 2018
Location: Athens, Ga
Posts: 801
Re: K30 Downgrade to Cummins Project

Quote:
Originally Posted by Dieselwrencher View Post
That is only on storm blocks and his block is not a storm block. Jud, I'd go over the mount not under. The oil may not return to the pan properly. You can get SS flexible lines that will help this situation.

https://www.google.com/search?q=dodg...hrome&ie=UTF-8
Never knew that about the blocks. Now I have something to google tonight.
Madkidd007 is offline   Reply With Quote
Old 06-13-2019, 12:43 AM   #211
Vintage Windmills
Vintage 4x4s
 
Vintage Windmills's Avatar
 
Join Date: Sep 2010
Location: Prior Lake, MN
Posts: 4,300
Re: K30 Downgrade to Cummins Project

Quote:
Originally Posted by Dieselwrencher View Post
You can get SS flexible lines that will help this situation.

https://www.google.com/search?q=dodg...hrome&ie=UTF-8
I think thats what I bought a few days ago. Here is a pic. I should be able to rebend this, add a hose section and use the original elbow thats pressed into the block.
Attached Images
 
__________________

67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades)
67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore )
86 CHV K30 502 th400, apple red NEW
71 CHV K20 350 SM465, ochre (saved work truck)
71 CHV K20 292 SM465, white, tach, PTO, (future project)
72 CHV K20 350 350th, medium blue (project stocker)
01 CHV K2500hd crew, indigo blue

^3 dont run and the others don't see winter either
'86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649
'71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642
'72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6
Vintage Windmills is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:47 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com