The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-07-2019, 05:51 AM   #1
69_shortbox
Registered User
 
Join Date: Mar 2019
Location: Halifax Nova Scotia
Posts: 19
Budget air ride

Hey all,
Im looking to go air ride on my 69 swb, Ive been doing some research and came up with these two budget kits
http://67-72chevytrucks.com/vboard/showthread.php?t=655935
https://azproperformance.com/products/budget-air-ride-kit-63-72-c10
Basically Im looking to get a nice low stance, decent ride quality and not break the bank. I was hoping to get some opinions and suggestions about these kits and other budget kits. Id just like to say that although Id love to go for a more expensive kit with more bells and whistles Im a college kid trying to pay for education AND build a badass truck!
Thanks for any help guys!
Posted via Mobile Device
69_shortbox is offline   Reply With Quote
Old 05-07-2019, 08:16 PM   #2
Mike C
Registered User
 
Mike C's Avatar
 
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,068
Re: Budget air ride

Lower your truck, have it drive nice, not have to work on the suspension, save money = static drop.

Air bag setups may be trendy, but in the end you will spend less and work on it less with a static drop. 4 1/2" front 7" rear on my short step. Leaf spring flip in the rear so you get what you get with that. ECE conversion spindles for discs with 2 1/2" drop and 2" drop spring.

I have a factory front sway bar with the ECE drop brackets. I pulled the overload in the rear and running a set of CalTracs. Would do it EXACTLY the same again.

__________________
44 Willys MB
52 M38A1
64 Corvette Coupe
68 Camaro 'vert LT1 & TH700
69 Z/28 355 12.6's @110
69 Chevy Short Step 4 1/2"/7" drop
72 Jimmy 4WD 4spd 4" & 35's
02 GMC 2500HD 4x4 Duramax
Mike C is offline   Reply With Quote
Old 05-08-2019, 10:03 AM   #3
blazer2007
Registered User
 
Join Date: Jan 2007
Location: vernon b.c.
Posts: 2,160
Re: Budget air ride

I agree with Mike I have one with air and one that is static,I drive the static one more than the air one. Air is kinda cool but you can,t drive it that low unless you spend a small fortune on P.B fr. end and rear setup. Can,t beat static on a budget, lowered spindles ,cut a coil and a flip kit
blazer2007 is online now   Reply With Quote
Old 05-08-2019, 11:18 AM   #4
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 17,815
Re: Budget air ride

Weird.... Once on the road, I haven't had to work on my air ride equipped trucks (my old 68 & my dually) any more than I've had to on my static suspension trucks (my old 74 & my 90). Air ride isn't necessary for a nice driving lowered truck but it isn't a bad choice either. If you use your truck for towing or hauling heavy stuff, an air set-up can definitely offer better performance.

69_shortbox, static dropping a truck is easier (mechanically & budget wise). I would recommend starting there.

Beyond that, you're better off spending money toward products that allow a lowered height while allowing plenty of road clearance. Dropped/modified crossmembers, enlarged wheel tubs, & raised bed floors offer a MUCH improved driving experience. It gets annoying real quick when things are rubbing, banging against, or scraping constantly. I've seen many a truck on air that when driving down the road, they were not any lower than my static dropped trucks were. They could only get lower when parked or barely creeping around a show.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides

Building a small, high rpm engine
with the perfect bore, stroke and rod ratio is very impressive...
like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.

Cubic inches is like Indiana Jones with a cheap pistol....
SCOTI is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:47 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com