The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-27-2019, 09:34 PM   #1
72Cheyenne454
Registered User
 
72Cheyenne454's Avatar
 
Join Date: Apr 2007
Location: San Diego
Posts: 330
Can anyone provide feedback on 350 Chevy retro style hydraulic roller lifters

Curious if anyone has any recent experience with aftermarket retro style (link bar) hydraulic roller lifters for 350 Chevy.

I'm doing a stock rebuild on a 1970 350 and I'm just not up to messing around with flat tappets anymore. The risk associated with possible cam/lifter failure and the hassle of break in is pushing me to bite the bullet and spend the money to upgrade to a retro roller set up.

I'm not interested in converting to a later model vortec roller style block, so I'm curious if anyone has any firsthand experience with retro hyd roller lifters.

I've researched several forums and have spent countless hours trying to determine which brand to use. My machinist says he has had the best luck lately with Gaterman lifters. Others swear by Morel, or Comp, or Crower, or? Like anything you research, I have found negative experiences on-line for each, but if you have any firsthand experience, I'd appreciate your feedback.

From what I've read, it seems as though there are only a few manufactures actually producing hyd retro roller lifters and various companies buy them and call them their own?

I'm currently considering a Howards roller set up. Again this is a stock rebuild, so I'm not looking to spin the little thing past 5k, if ever, so I don't need a high rpm lifter... just need lifters that are quite and dependable.

Thanks!
__________________
_______________

- Miles -


1972 GMC Shorty Conversion

1972 GMC Short Bed (was a long bed, 3/4 ton), 454, TH400, Gear Vendor OD, 12 Bolt 3.42 Posi, 4 Wheel Disc, 4.5"/6" Drop,
17x8 - 235-60 Front, 17x9 - 275-60 Rears

1970 Chevy K20

1954 Chevy 3100 - Project Truck

2012 GMC Sierra Denali 1500, 6.2 & Supercharged - Daily Driver
72Cheyenne454 is offline   Reply With Quote
Old 05-28-2019, 02:00 PM   #2
61K10
Registered User
 
61K10's Avatar
 
Join Date: Feb 2012
Location: pleasant valley--placerville ca
Posts: 2,939
Re: Can anyone provide feedback on 350 Chevy retro style hydraulic roller lifters

Howards has been around a long time. Don't know who makes their lifters. I have only run Eski hyd roller cam and lifters in a big block. See if you can find (google) some info on the net of their cam and lifters.
__________________
1961 chevy K10

my build is------------61K10 build
61K10 is offline   Reply With Quote
Old 05-28-2019, 02:04 PM   #3
Indychus
Registered User
 
Indychus's Avatar
 
Join Date: Jun 2010
Location: Irmo, SC
Posts: 137
Re: Can anyone provide feedback on 350 Chevy retro style hydraulic roller lifters

I've had good results with Lunati roller lifters, but Howard's is good stuff too.
__________________
Build Thread: Project Overkill 1968
Bagged & Blown Pro Street 1968 Short Fleet
Indychus is offline   Reply With Quote
Old 05-28-2019, 03:08 PM   #4
61K10
Registered User
 
61K10's Avatar
 
Join Date: Feb 2012
Location: pleasant valley--placerville ca
Posts: 2,939
Re: Can anyone provide feedback on 350 Chevy retro style hydraulic roller lifters

Just did a little search, some good reviews some not so good. Some had roller lifter problems. also somebody said not the same owners.
__________________
1961 chevy K10

my build is------------61K10 build
61K10 is offline   Reply With Quote
Old 05-28-2019, 03:19 PM   #5
weq92f
Senior Member
 
Join Date: Oct 2016
Location: Dallas Texas
Posts: 1,487
Re: Can anyone provide feedback on 350 Chevy retro style hydraulic roller lifters

.
I'm running Comp retro roller lifters in my BBC and have not been able to get them to be quiet. They are very noisy. Getting ready to pull them out and replace with Howards...nearly a 500 dollar mistake.

I'm not alone either according to my research!

-klb
__________________
67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi
07 335 sport turbo 6sp
94 Trans Am GT LT1 6sp posi -- sold after 22yrs
99 540 sport V8 6sp -- sold
73 240z L24 4sp -- given to friend
68 C10 step 350/350 3.73 open -- sold
weq92f is offline   Reply With Quote
Old 06-02-2019, 03:44 PM   #6
72Cheyenne454
Registered User
 
72Cheyenne454's Avatar
 
Join Date: Apr 2007
Location: San Diego
Posts: 330
Re: Can anyone provide feedback on 350 Chevy retro style hydraulic roller lifters

Quote:
Originally Posted by 61K10 View Post
Howards has been around a long time. Don't know who makes their lifters. I have only run Eski hyd roller cam and lifters in a big block. See if you can find (google) some info on the net of their cam and lifters.
Thanks for the feedback on Eski.

Quote:
Originally Posted by Indychus View Post
I've had good results with Lunati roller lifters, but Howard's is good stuff too.
Thanks for the feedback, I appreciate it.

Quote:
Originally Posted by 61K10 View Post
Just did a little search, some good reviews some not so good. Some had roller lifter problems. also somebody said not the same owners.
Unfortunately, I've read that too. In fact, every hydraulic lifter has both positive and negative reviews. Seems like a roll of the dice.

Quote:
Originally Posted by weq92f View Post
.
I'm running Comp retro roller lifters in my BBC and have not been able to get them to be quiet. They are very noisy. Getting ready to pull them out and replace with Howards...nearly a 500 dollar mistake.

I'm not alone either according to my research!


-klb
That sucks. I've read a TON of reviews where guys are having the same issue as you with the Comp rollers - noisy! As big as Comp is, you'd think their product would be top notch, but reviews on their roller lifters definitely indicates there's a pretty widespread issue with the hyd roller lifters they offer.

Thanks for providing your input. I think I'll go with the Howards set up and hope for the best.
__________________
_______________

- Miles -


1972 GMC Shorty Conversion

1972 GMC Short Bed (was a long bed, 3/4 ton), 454, TH400, Gear Vendor OD, 12 Bolt 3.42 Posi, 4 Wheel Disc, 4.5"/6" Drop,
17x8 - 235-60 Front, 17x9 - 275-60 Rears

1970 Chevy K20

1954 Chevy 3100 - Project Truck

2012 GMC Sierra Denali 1500, 6.2 & Supercharged - Daily Driver
72Cheyenne454 is offline   Reply With Quote
Old 06-02-2019, 04:17 PM   #7
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 10,568
Re: Can anyone provide feedback on 350 Chevy retro style hydraulic roller lifters

I read a post recently about noisy lifters (some other forum) and the likely problem encountered was not setting the preload correctly. You can’t just use the old standard of 3/4 or 1 turn like most use.
Comp cams had different settings depending on which lifters were used. Some where only 1/8 turn.
Make sure you follow the specs on whichever you choose.
geezer#99 is offline   Reply With Quote
Old 06-03-2019, 02:40 PM   #8
toolboxchev
Registered User
 
Join Date: Jul 2015
Location: 2nd left past the stump on a dirt road.
Posts: 1,715
Re: Can anyone provide feedback on 350 Chevy retro style hydraulic roller lifters

Comps standard hyd flat flat tappets were noisy. Yea they took multiple times of adjustment to get them to quiet down, that and the correct oil.

I have heard just recently they have changed their supplier on lifters. Interesting as BBC lifters are very different from SBC lifters.

Ore maybe I am just wrongE! Ha!
toolboxchev is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:50 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com