The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-30-2019, 08:56 PM   #1
Funstuie
Registered User
 
Join Date: Apr 2018
Location: San Francisco, California
Posts: 46
76 c10 (scottsdale) cluster wiring description/information?

Hey all

Iím trying to wire up a Dakota digital vid and Iíve hit a bit of wall with the cluster wiring. I donít know what each wire is and I canít seem to find a clear description. Iíve taken a couple of photos of the original gauge cluster wiring connector. Does anyone have a description of each number?
Attached Images
  
Funstuie is offline   Reply With Quote
Old 05-31-2019, 12:30 AM   #2
Funstuie
Registered User
 
Join Date: Apr 2018
Location: San Francisco, California
Posts: 46
Re: 76 c10 (scottsdale) cluster wiring description/information?

I found some diagrams and got some of the wires worked out. But it says that the brake is both 6 + 13. Do I connect both thee to the Dakota box?

Also where is the tach/ignition?
Funstuie is offline   Reply With Quote
Old 05-31-2019, 12:35 AM   #3
Funstuie
Registered User
 
Join Date: Apr 2018
Location: San Francisco, California
Posts: 46
Re: 76 c10 (scottsdale) cluster wiring description/information?

Another dumb one. The fuel is listed as 7 + 18 which I presume is because I have dual tanks. Am I right in that only one tank will be displayed now?
Funstuie is offline   Reply With Quote
Old 05-31-2019, 05:58 PM   #4
Funstuie
Registered User
 
Join Date: Apr 2018
Location: San Francisco, California
Posts: 46
Re: 76 c10 (scottsdale) cluster wiring description/information?

I worked out that 13 for the brake was looped into 6 so I used that one

some research online suggests I tap into the signal wire on the fuel sender switch
Funstuie is offline   Reply With Quote
Old 06-01-2019, 07:11 AM   #5
kipps
Registered User
 
Join Date: Jul 2014
Location: North-central Virginia
Posts: 288
Re: 76 c10 (scottsdale) cluster wiring description/information?

Do you still have the original cluster? If so, the best way to identify the wires is to trace out the paths on the printed circuit board. I've done that on a couple, and it's not hard.
__________________
1987 V20 truck, with a 2010 LMG 5.3, and a sm465 tranny.
kipps is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:33 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com